Close

Standard with amendment(s)

Products

IPC-4101 - Revision E - Standard with Amendment 1

Specification for Base Materials for Rigid and Multilayer Printed Boards

Document #:
Revision
E
Released:  04/14/2020
Language
English
Current Revision
IPC-4101E-WAM1 covers the requirements for base materials that are referred to as laminate or prepreg and listed in the specification sheets which are found after the main body of the standard. The specification sheets are to be used primarily for rigid and multilayer printed boards for electronic interconnections. The IPC-4101E-WAM1 standard contains 70 individual specification sheets that can be...

IPC-7095 - Revision D - Standard with Amendment 1

Design and Assembly Process Implementation for BGAs

Document #:
Revision
D
Released:  07/09/2019
Language
English
Current Revision
The IPC-7095D-AM1 standard describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095D-AM1 provides the useful and practical information to those who use or are considering using BGAs. IPC-7095D-AM1 provides...

IPC-J-STD-004C - Revision C - Standard with Amendment 1

Requirements for Soldering Fluxes

Document #:
Revision
C
Released:  02/15/2023
Language
English
Current Revision
The IPC J-STD-004C WAM1 standard prescribes general requirements for the classification and characterization of fluxes for high quality solder interconnections. The IPC J-STD-004C WAM1 standard may be used for quality control and procurement purposes. Soldering flux materials include the following: liquid flux, paste flux, solder paste, solder cream as well as flux-coated and flux-cored solder...

IPC-4562 - Revision A - Standard with Amendment 1

Metal Foil for Printed Board Applications

Document #:
Revision
A
Released:  01/01/2016
Language
English
Current Revision
IPC-4562A-WAM1 covers metal foils supported by carrier films and unsupported foils suitable for subsequent use in printed boards. The Amendment 1 that has been inserted into the base document added back the light cold rolled-wrought copper foil (/6 [Cu-W6] that was previously removed during the revision A actions. Unless otherwise agreed upon between the user and supplier (AABUS), metal foils...

IPC-J-STD-003 - Revision C - Standard with Amendments 1 & 2

Solderability Tests for Printed Boards

Document #:
Revision
C
Released:  10/02/2017
Language
English
Current Revision
The IPC-J-STD-003C-WAM1&2 standard prescribes test methods, defect definitions and illustrations for assessing the solderability of printed board surface conductors, attachment lands and plated-through holes (PTHs). The IPC-J-STD-003C-WAM1&2 standard is not intended to verify the potential of successful processing at assembly or to evaluate design impact on wettability. The IPC-J-STD-003C-WAM1&2...

IPC-1753 - Standard with Amendment 1

Laboratory Report Standard

Document #:
Revision
Original Version
Released:  05/03/2018
Language
English
Current Revision
IPC 1753 WAM1 Laboratory Declaration Standard will allow for the electronic exchange of laboratory chemical analysis reports between supply chain members. Companies are being asked to provide laboratory analytic data to show compliance with the RoHS Directive and other customer requirements, such as halogen-free. This standard will allow for the expedited exchange of the necessary laboratory...
Document #:
Revision
Original Version
Released:  08/18/2015
Language
English
Current Revision
This publication is intended to characterize the frature strength of a component's board level-interconnect by providing a common method of establishing the fracture resistance to flexural loading that may occur during conventional non-cyclic board assembly and test operations. The document is applicable to surface mount components attached to printed wiring boards using conventional solder reflow...

IPC-7095 - Revision D - Standard with Amendment 1

BGA设计与组装工艺的实施

Document #:
Revision
D
Released:  09/19/2019
Language
Chinese
Current Revision
IPC-7095D在设计,组装,检查和维修过程中实施球栅阵列(BGA)和细节距球栅阵列(FBGA)技术提出了了一些独特的挑战。它为使用或正在考虑使用BGA的用户提供有用和实用的信息。 它还介绍了如何使用BGA成功实现印刷电路板组件的稳健设计和装配流程,以及解决BGA组装过程中可能出现的一些常见异常的方法。由于焊球中合金,焊球形状,封装程序等的改变,许多问题变得尤为重要。D版主要重点是为组装后出现的一些新的机械失效问题如坑裂或层压缺陷提供信息。除了提供BGA检查和维修的指引外,本标准还解决了与BGA相关的可靠性问题和无铅焊点的使用标准。该标准中有许多X射线和内窥镜的照片和插图以确认行业中BGA组装工艺的实施中的遇到的一些情况。
Document #:
Revision
D
Released:  06/17/2020
Language
Japanese
Current Revision
IPC-7095D-AM1は、ボールグリッドアレイ(BGA)およびファインピッチBGA(FBGA)技術の設計および組立の実施について記述するものであり、これらのパッケージを使用したプリント基板の設計と組立に関連する検査、リペアおよび信頼性の問題に焦点を当てている。 IPC-7095D-AM1は、BGAを使用している、もしくは使用を検討している本書読者に対し、有用で実用的な情報を提供するものである。またIPC-7095D-AM1では、BGAを使用するプリント基板組立のためのロバスト設計と組立プロセスの正しい方法について説明するとともに、BGAの組立中に発生する可能性のある一般的な異常について、トラブルシューティングの方法を説明している。

IPC-J-STD-003 - Revision C - Standard with Amendments 1 & 2

プリント基板のはんだ付性試験

Document #:
Revision
C
Released:  03/12/2021
Language
Japanese
Current Revision
J-STD-003Cは、すず鉛または鉛フリーのはんだを使用しながら、プリント基板の表面導体、取付けランドおよびめっきスルーホールのはんだ付性を評価するための試験方法や欠陥の定義について規定し、また図を示すものである。本規格はベンダーおよびユーザーの両者による使用を目的としている。本規格はプリント基板の表面導体、取付けランドおよびめっきスルーホールがはんだと容易にぬれること、および過酷なプリント基板組立工程に耐えることに合格であると判定するためのはんだ付性試験方法を提供することを目的としている。本規格は表面導体(および取付けランド)とめっきスルーホールの両方のはんだ付性を評価するための試験方法について説明している。リビジョン「C」には、はんだ付性試験のGR&R (ゲージ繰返し性&再現性)に関する最新情報、およびアップデートされた図が掲載されている。 改訂版1は編集上の誤記を修正するとともに...