IPC-2231A provides guidelines for establishing a best practice methodology for use in developing a formal DFX (Design for Manufacturing, Fabrication, Assembly, Testability, Cost, Reliability, Environment, Reuse) process for layout of printed boards.
Your results
- 724
Document #
Language
Products
Controlled impedance is the maintenance of some specified tolerance in the characteristic impedance of an interconnect line (transmission line) that is used to connect different devices on a circuit. Controlled impedance is often a design consideration for high-speed digital or high-frequency analog circuits. This guide is intended to be used by circuit designers, packaging engineers, printed...
The IPC-1921A handbook provides problems, causes and possible corrective actions related to printed board manufacturing processes. Includes more than 200 photos and illustrations depicting common defects.
The IPC-A-640A standard provides acceptance requirements and technical insight that have been removed from acceptance standards for cable and wire harness assemblies incorporating optical fiber, optical cable and hybrid wiring technology. The IPC-A-640A is intended for use by the design engineer, manufacturing engineer, quality engineer and other individuals responsible for tailoring specific...
Developed by the OEM council of the IPC, the MQP sets the standard for assessing PWB manufacturer capabilities and allows PCB manufacturers to more easily satisfy customer requirements. This document eases auditing processes and reduces the frequency of audits, thereby decreasing paperwork and enhancing manufacturer effectiveness. Revision A consists of a single, easy to use electronic file...
IPC-1782B establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782B applies to all products, processes, assemblies, parts, components, equipment used and other items as defined by users and suppliers in the manufacture of printed board assemblies, as well as mechanical assembly and printed board fabrication. IPC-1782B is applicable both for...
This standard prescribes the nomenclature, requirements and test methods for electronic grade solder alloys; for fluxed and non-fluxed bar, ribbon and powder solders for electronic soldering applications; and for ‘‘special’’ electronic grade solders. This is a quality control standard and is not intended to relate directly to the material’s performance in the manufacturing process. Solders for...
The IPC-7801A standard provides requirements for process control of conveyorized solder reflow ovens. It includes a methodology for performing temperature measurements over time to establish a baseline profile, and then provides requirements to verify repeatability through periodic verification of the oven profile.
UPDATED! This standard describes a data format for transmitting bare board electrical test information in digital form, including data suitable for computer-aided repair. When used as a netlist input to test data processing, the receiver of IPC-D-356B data will determine test point assignments and positioning. Enhancements to the B Revision include updates to the concept of testable areas to...
This document is the product of the IPC Electrochemical Migration (ECM) Task Group. It was drafted to provide guidance regarding implementation of the User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing to evaluate the effects of mechanical stress, laminate material fracturing, ionic contamination, moisture...
While there are a variety of industry test vehicles for the examination of material compatibility, the IPC-B-52 test board was created to meet the needs for testing both ion chromatograph and surface insulation resistance (SIR) which would be more representative of the manufacturing materials and processes. IPC-9203A standard addresses the IPC-B-52 test vehicle, which can be used to evaluate a...
The IPC-6017A standard defines the electrical, mechanical, and environmental requirements specific to embedded passive and active circuitry in printed boards. These requirements are in addition to the applicable requirements of other performance specification(s) (e.g., J-STD-001).
The IPC-1782A standard establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782A applies to all products, processes, assemblies, parts, components, equipment and other items used in the manufacture of printed board assemblies and in mechanical assembly.
This standard provides and defines key characteristics and test methods for procuring printed electronics substrates. Includes six materials specification sheets.
IPC-2222B used in conjunction with IPC-2221, establishes the specific requirements for the design of rigid organic printed boards and other forms of component mounting and interconnecting structures. The IPC-2222B standard applies to single-sided, double-sided, or multi-layered boards. Key concepts in IPC-2222B are rigid laminate properties, design requirements for printed board assembly and...
The IPC-4202C standard covers the requirements for flexible base materials, herein referred to as laminates, prepregs or films, to be used primarily for flexible printed boards for electrical and electronic circuits
IPC-4103B standard covers the requirements for clad and unclad plastic laminate and bonding layer materials to be used for the fabrication of printed boards for microstrip, stripline and high speed digital electrical and electronic circuits. In addition to better definitions of inclusions and how to properly classify them; redefine "substrates" as, "fabricated sheets"; and a more proper definition...
IPC-7092A standard describes the design, materials and assembly challenges associated with implementing embedded circuitry into a printed board. IPC-7092A covers various aspects of embedded circuitry related with the design, selection, processing and testing to achieve a completed multilayered structure that is ready for surface mount and/or through-hole component attachment.
IPC-2226A, Sectional Design Standards for High Density Interconnect (HDI) Printed Boards is used in conjunction with IPC-2221B. The IPC-2226A standard establishes requirements and considerations for the design of high density interconnect (HDI) printed boards and microvia technology. Revision A constitutes a substantial update to the document, with an all new color key for HDI constructions, new...
IPC-2221C is the foundation design standard for all documents in the IPC-2220 series. It establishes the generic requirements for the design of printed boards and other forms of component mounting or interconnecting structures, whether single-sided, double-sided or multilayer. Among the many updates to Revision C are new guidance and requirements on material and copper foil selection...
The IPC-CC-830C standard establishes qualification and conformance requirements for electrical insulating compounds (conformal coatings). It has been designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy. The IPC-CC-830C standard covers: • The qualification and qualification retention of the conformal coating material (Table 3-1...
The IPC-2581C standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most...
IPC-2292A standard establishes specific requirements for the design of printed electronic applications and their forms of component mounting and interconnecting structures on flexible substrates. Flexible substrates, as pertaining to IPC-2292A standard, are materials, devices or functionalized circuitry which have some amount of flexibility or bendability (not rigid) but are not considered to be...
The IPC-1401A standard specifies the requirements and best practice guidelines for an effective corporate social responsibility (CSR) management system to help an enterprise integrate CSR as a customer requirement into products and value chain activities, as well as to identify and manage CSR risks and opportunities through cooperation with customers and suppliers, to enhance the competitive...
The IPC-7525C standard provides guidance for the design and fabrication of stencils for solder paste and surface-mount adhesive with much of the content based on the experience of stencil designers, fabricators, and users.
Coming Soon
IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)
IPC-2294: Design Standard for Printed Electronics on Rigid Substrates
IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates
J-STD-005B: Requirements for Soldering Pastes
IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards
J-STD-004D: Requirements for Soldering Fluxes
IPC-4413: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards