Menu
Close
Contact IPC

Standards

Your results

Document #

Language

Products

IPC-FC-234 - Revision A - Standard Only

Pressure Sensitive Adhesive (PSA) Assembly Guidelines for Flexible, Rigid or Rigid-Flex Printed Boards

Document #:
IPC-FC-234
Revision
A
Product Type
Standard Only
Released:  12/23/2014
Language
English
Current Revision
This document provides the designer/user with guideline information related to the use of pressure sensitive adhesives (PSAs) for fabrication and assembly of flexible, rigid or rigid-flex printed boards, membrane switches and component attachments. It also provides information on adhesive types available, their inherent strengths, weaknesses, limitations and correct processes needed for creating...
IPC-6012E-AM1 Cover Image

IPC-6012 - Revision E - Amendment 1

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Amendment
Released:  04/20/2022
Language
English
Current Revision
IPC-6012E-AM1 is an Amendent to the IPC-6012E that clarifes the distinction between receding and dewetting solder in reflowed SPb or HASL coatings. The Amendment also provides amended criteria for minimum external conductor thickness of the finished printed board and new acceptance criteria for the minimum thickness of internal plated layers
IPC-A-610HC Cover Image

IPC-A-610 - Revision H - Addendum - Telecom

Telecom Addendum to IPC-A-610 Revision H Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
H
Product Type
Addendum
Released:  04/27/2023
Language
English
Current Revision
The IPC-A-610HC Telecom Addendum to IPC-A-610H Acceptability of Electronic Assemblies provides specific requirements for telecommunications products when it is specifically required by procurement documentation. Information in this document either supplements or replaces specifically identified requirements of IPC-A-610 Revision H by providing additional requirements to ensure that electrical and...
IPC-A-620E Space Cover Image

IPC/WHMA-A-620 - Revision E - Addendum - Space and Military

Space and Military Applications Electronic Hardware Addendum to IPC/WHMA-A-620

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Addendum
Released:  11/28/2023
Language
English
Current Revision
IPC/WHMA-A-620E-S space addendum provides additional requirements to IPC/WHMA-A-620E standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620E-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...
no-image-available

IPC-6012 - Revision F - Addendum - Space and Military

Space and Military Avionics Applications Addendum to IPC-6012F, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
F
Product Type
Addendum
Released:  02/23/2024
Language
English
Current Revision
The IPC-6012FS space addendum provides exceptions to IPC Performance Class 3 requirements of the IPC-6012F for use in space and military avionics product. Exceptions include changes to acceptance criteria and/or sample size and test frequency for production lot acceptance testing. The IPC-6012FS covers requirements for rigid printed boards to survive vibration, extreme thermal cycling and ground...
IPC-6012EA Cover Image

IPC-6012 - Revision E - Addendum - Automotive

Automotive Applications Addendum to IPC-6012E Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  11/30/2021
Language
English
Current Revision
The IPC-6012EA Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012 revision E, for rigid printed boards that must survive the vibration and thermal cycling environments of electronic interconnects within the automotive industry. The addendum includes updated requirements for lifted lands, pattern feature accuracy...

IPC-6012 - Revision E - Addendum - Medical

Medical Applications Addendum to IPC-6012E Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  09/10/2020
Language
English
Current Revision
The IPC-6012EM Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012E, for rigid printed boards that must meet requirements to high reliability medical device applications. IPC-6012EM is the only global industry-consensus standard for Medical Applications to Qualification and Performance Specifications for Rigid...
no-image-available

IPC-6013 - Revision E - Addendum - Medical

Medical Applications Addendum to IPC-6013E Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
E
Product Type
Addendum
Released:  04/12/2022
Language
English
Current Revision
The IPC-6013EM Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6013E, for flexible/rigid-flexible printed boards that must meet requirements to high reliability medical device applications. IPC-6013EM is the only global industry-consensus standard addendum for Medical Applications to Qualification and Performance...

IPC-T-50 - Revision M - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  05/26/2015
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...
no-image-available

IPC-A-610 - Revision G - Addendum - Rail Transit

Rail Transit Addendum to IPC-A-610G Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
G
Product Type
Addendum
Released:  05/31/2022
Language
English
Current Revision
IPC-A-610G-R rail transit addendum provides additional requirements to IPC-A-610G base standard, specifying a standardized set of acceptance criteria unique to electronic assemblies used in the rigorous micro-environment under high mechanical and environmental stresses associated with high railway equipment, to ensure industry-specific high reliability and environmental adaptability of electronic...

IPC-T-50 - Revision K - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  07/17/2013
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...

IPC-A-610 - Revision H - Standard Only

Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  10/07/2020
Language
English
IPC-A-610H is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610H standard includes a general update to the document, introduces several new surface mount component types and removes target conditions. Participants from 29 countries provided their input and expertise to bring this document to the electronics industry. This is a must-have for...
IPC-A-610J - Cover Image

IPC-A-610 - Revision J - Redline Standard

Acceptability for Electronic Assemblies

Document #:
IPC-A-610
Revision
J
Product Type
Redline Standard
Released:  04/11/2024
Language
English
Current Revision
IPC-A-610H to IPC-A-610J redline document shows the changes from IPC-A-610H to IPC-A-610J in a side-by-side comparison of the two documents. The IPC-A-610J redline is only available in electronic format, it is not available in hardcopy. As a comparison document it does not replace the standard.
no-image-available

IPC-A-600 - Revision J - Standard Only

Acceptability of Printed Boards

Document #:
IPC-A-600
Revision
J
Product Type
Standard Only
Released:  06/09/2016
Language
English
The definitive illustrated guide to printed board acceptability! This four-color document provides photographs and illustrations of the target, acceptable and nonconforming conditions that are either internally or externally observable on bare printed boards. Make sure your operators, inspectors, and engineers have the most current industry consensus information. With 120 new or revised...
no-image-available

IPC/WHMA-A-620 - Revision C - Addendum - Rail Transit

Rail Transit Addendum to IPC/WHMA-A-620C

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Addendum
Released:  05/31/2022
Language
English
Current Revision
IPC/WHMA-A-620C-R rail transit addendum provides additional requirements to IPC/WHMA-A-620C standard, describing materials, methods, tests, and acceptance criteria for producing crimped, mechanically secured, and soldered interconnections. It also provides the related assembly activities associated with cable and harness assemblies in rail transit industry, to ensure the high reliability and...
no-image-available

IPC-A-610 - Revision H - Redline Standard

Acceptability of Electronic Assemblies - Redline

Document #:
IPC-A-610
Revision
H
Product Type
Redline Standard
Released:  10/07/2020
Language
English
Current Revision
IPC-A-610H Redline document shows the changes from IPC-A-610G to IPC-A-610H in a side-by-side comparison of the two documents. The IPC-A-610H redline is only available in electronic format, it is not available in hardcopy
no-image-available

IPC-A-600 - Revision H - Standard Only

Acceptability of Printed Boards

Document #:
IPC-A-600
Revision
H
Product Type
Standard Only
Released:  04/13/2010
Language
English
The definitive illustrated guide to printed circuit board acceptability! This four-color document provides photographs and illustrations of the target, acceptable and nonconforming conditions that are either internally or externally observable on bare printed boards. Make sure your operators, inspectors, and engineers have the most current industry consensus information. With over 90 new or...
no-image-available

IPC-T-50 - Revision J - Standard Only

SUPERSEDED BY T-50K

Document #:
IPC-T-50
Revision
J
Product Type
Standard Only
Released:  10/18/2011
Language
English
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...
no-image-available

IPC/WHMA-A-620 - Revision E - Redline Standard

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Redline Standard
Released:  03/06/2023
Language
English
Current Revision
IPC/WHMA-A-620E-RL is a redline document showing the difference from IPC/WHMA-A-620D to IPC/WHMA-A-620E. IPC/WHMA-A-620E-RL provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows deleted/changed text in the IPC/WHMA-A-620D pages and new/revised text in the IPC/WHMA-A-620E pages. Due to the complexity of this document, it is only available in...

IPC/WHMA-A-620 - Revision D - Standard Only

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  01/21/2020
Language
English
IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...

IPC-1602 - Standard Only

Standard for Printed Board Handling and Storage

Document #:
IPC-1602
Revision
Original Version
Product Type
Standard Only
Released:  04/07/2020
Language
English
Current Revision
The IPC-1602 standard provides requirements intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging materials types and methods, production environment, handling and transport of product, and establishing baking profiles for moisture removal. IPC-1602 is now providing requirements that can be called...
no-image-available

IPC-1756 - Standard Only

Manufacturing Process Data Management

Document #:
IPC-1756
Revision
Original Version
Product Type
Standard Only
Released:  04/05/2010
Language
English
Current Revision
IPC-1756 establishes the requirements for exchanging manufacturing data between suppliers and customers for electrical and electronic products. IPC-1756 establishes 23 fields for declaration of manufacturing data supported by Scriba and other tools developed for use between users and suppliers. The type of manufacturing information includes sensitivity to moisture and high temperature, different...
26-50 of 423

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-8401: Guidelines for In-Mold Electronics

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly