Products
The IPC-A-600K is the definitive illustrated guide to printed board acceptability! The IPC-A-600K is a four-color document providing photographs and illustrations of the target, acceptable and nonconforming conditions that are either internally or externally observable on bare printed boards. Make sure your operators, inspectors, and engineers have the most current industry consensus information...
IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...
IPC/JEDEC J-STD-033D provides surface mount device manufacturers and users with standardized methods for handling, packing, shipping and use of moisture/reflow sensitive components. These methods help avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation and damaged components. IPC/JEDEC J-STD-033D procedures provide a...
The IPC-7711/21 guide provides procedures for rework, repair and modification of printed board assemblies, including tools and materials, common procedures, coating removal and graphics to assist the user.
IPC-4101E-WAM1 covers the requirements for base materials that are referred to as laminate or prepreg and listed in the specification sheets which are found after the main body of the standard. The specification sheets are to be used primarily for rigid and multilayer printed boards for electronic interconnections. The IPC-4101E-WAM1 standard contains 70 individual specification sheets that can be...
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...
IPC-6012F, covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical, mechanical...
IPC J-STD-004D standard prescribes general requirements for the classification and characterization of fluxes for high quality solder interconnections. IPC J-STD-004D standard may be used for quality control and procurement purposes.
IPC-6013E standard covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. The IPC-6013E standard incorporates new and updated requirements for final...
The IPC-7095D-AM1 standard describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095D-AM1 provides the useful and practical information to those who use or are considering using BGAs. IPC-7095D-AM1 provides...
IPC/JEDEC J-STD-020F standard is to identify the classification level of nonhermetic SMDs designed for surface mount assembly that are sensitive to moisture-induced stress so that they can be properly packaged, stored, and handled to avoid damage during assembly solder reflow attachment and/or repair operations. IPC/JEDEC J-STD-020F standard may be used to determine what classification level...
IPC-2223E used in conjunction with IPC-2221, IPC-2223 establishes the specific requirements for the design of flexible printed boards and forms of component mounting and interconnecting structures. The flexible materials used in the structures are comprised of insulating films, reinforced and/or non-reinforced dielectric in combination with metallic materials. IPC-2223E provides new design...
IPC-J-STD-002E prescribes test methods, defect definitions, acceptance criteria, and illustrations for assessing the solderability of electronic component leads, terminations, solid wires, stranded wires, lugs, and tabs. The IPC-J-STD-002E standard also includes a test method for the resistance to dissolution/dewetting of metallization. IPC-J-STD-002E is intended for use by both supplier and user...
IPC-1791D standard provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and...
The IPC-6018D standard covers qualification and performance of high frequency (microwave) boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as...
This document bears two reference numbers, and may be obtained from IPC or the IEC. IPC-D-350D and IEC 1182-1 are identical in technical content. The IEC version of this document also contains a French translation. The IEC is responsible for the accuracy of that translation.Specifies record formats used to describe printed board products with detail sufficient for tooling, manufacturing and...
IPC-2221C is the foundation design standard for all documents in the IPC-2220 series. It establishes the generic requirements for the design of printed boards and other forms of component mounting or interconnecting structures, whether single-sided, double-sided or multilayer. Among the many updates to Revision C are new guidance and requirements on material and copper foil selection...
The IPC-7093A standard provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093A provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.
IPC-4562A standard covers metal unsupported foils and foils supported by carrier films suitable for subsequent use in printed boards. IPC-4562B addresses the requirements of metal foils used in printed wiring applications.
The IPC-4412C covers the requirements for reinforcements woven from "E"glass yarn. These reinforcements are used in the production of prepregs, some of which are pressed into laminates. These prepregs and laminates are the base materials for rigid and mulitlayer printed boards. The IPC-4412C standard contains tables which describe each fabriic style in detail including the yarn used, the number of...
IPC-2222B used in conjunction with IPC-2221, establishes the specific requirements for the design of rigid organic printed boards and other forms of component mounting and interconnecting structures. The IPC-2222B standard applies to single-sided, double-sided, or multi-layered boards. Key concepts in IPC-2222B are rigid laminate properties, design requirements for printed board assembly and...
This standard prescribes the nomenclature, requirements and test methods for electronic grade solder alloys; for fluxed and non-fluxed bar, ribbon and powder solders for electronic soldering applications; and for ‘‘special’’ electronic grade solders. This is a quality control standard and is not intended to relate directly to the material’s performance in the manufacturing process. Solders for...
IPC-4552B standard sets the requirements for Electroless Nickel / Immersion Gold (ENIG) deposit thickness for applications including soldering, wire bonding, and as a contact finish. IPC-4552B standard is used to specify acceptance criteria to meet performance standards for IPC-6010 family of documents including IPC-6012, IPC-6013 and IPC-6018. The ENIG deposit specified using this document will...
IPC J-STD-005B standard lists the requirements for qualification and characterization of solder paste. It references test methods, criteria, and metal content, viscosity, slump, solder ball, tack and wetting of solder pastes. Additional support is provided in IPC-HDBK-005, Guide to Solder Paste Assessment.
Establishes the general requirements for documentation necessary to fully describe end product printed boards, regardless of raw material, special fabrication requirements, layer count or end product usage. Includes master drawing requirements, board definition and artwork/phototooling. 94 pages. Revised May 1995.
Coming Soon
IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)
IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)
IPC-2294: Design Standard for Printed Electronics on Rigid Substrates
IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates
IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards