IPC-HDBK-840 supplements the solder mask requirements established in IPC specifications such as IPC-SM-840 and IPC-6012 by providing detailed information on solder mask types, application processes, pre- and post- assembly processes, characteristics and properties that are useful in the selection and use of the most appropriate mask type for a given application. Applicable to solder mask...
Dubbed the "nightmare microsection," this full-color, 24x36-inch (60 x 90 cm) wall poster identifies 42 phenomena that can be seen in cross-sections of plated-through holes. Outstanding visual for supporting discussions of common (and not so common) phenomena. All defects are labeled and match the language used in IPC standards IPC-A-600, IPC-6012 and IPC-T-50. Use this poster as a tool to assist...
The Amendment 1 to IPC-4556 made the following changes to the base specification: a) It added the absolute value of the maximum thickness for the immersion gold of 0.070 μm [2.8 μin] that accompanies the statistically valid minimum immersion gold thickness; b) It added two more photomicrograph images to provide better information on identifying nickel hyper corrosion; c) It added the basis of...
Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards Amendment 1 to IPC-4552 replaces the Table 3-1 Requirements of Electroless Nickel Immersion Gold Plating plus also replaces all of sections 3.2.1 Immersion Nickel Thickness and 3.2.2 Immersion Gold Thickness in the original release of the IPC-4552. The Amendment 1 permits the use of thinner gold (≥4 µm...
Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards Amendment 2 to IPC-4552 is a new section in the original release of the IPC-4552. The Amendment 2 provides the “rules” by which any rework and/or repair of a printed board's ENIG surface finish is allowed. Effective September 2012.
IPC-9121 AM1 is an amendment to IPC-9121 which provides updates to the Hole Preparation/Protection and Interconnect Formation sections, covering troubleshooting topics and guidance on nonconductive plugging paste, microvias and pattern plating rim voids. IPC-9121 AM1 also includes a new section on Flexible Circuits.
The IPC-1791-Am1 provides revisions and clarifications for requirements pertaining to CAGE Code, citizenship, security, foreign person access, traceability records and NIST SP 800-171 compliance.
The Amendment 2 to IPC-4103A-WAM1 made four fundamental changes to the base standard: All references to the epoxy curative of DICY (dicyandiamide) were removed; Opaque foreign inclusions were more specifically defined and limited; The optional properties of thermal conductivity for both laminates and bonding layers were added; and The dielectric constant (permittivity) ranges were specifically...
Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...
Ce document a été créé pour guider les concepteurs dans leur processus de définition des paramètres nécessaires pour créer les différents motifs dans leurs outils de CAD.