Products
IPC-6012E-AM1 is an Amendent to the IPC-6012E that clarifes the distinction between receding and dewetting solder in reflowed SPb or HASL coatings. The Amendment also provides amended criteria for minimum external conductor thickness of the finished printed board and new acceptance criteria for the minimum thickness of internal plated layers
Amendment 1 to IPC-7711/21C, the document provides procedures for removal and installation of D-Pak components
The J-STD-006C-AM1 amendment provides better detail of a solder alloy's maximum allowed deviation about the nominal level of the element's mass than was provided in past alloy standards. The J-STD-006C-AM1 amendment provides information on negative effects of adding rare earth elements to specific, heavy tin-containing, lead-free solder alloys and propensity of tin whisker formation. Finally, the...
IPC-4554, "Specification for Immersion Tin Plating for Printed Circuit Boards," is the third document in a series of specifications [the first two are: IPC-4552 which addresses electroless nickel/immersion gold (ENIG) and IPC-4553 which addresses immersion silver (IAg)] that set the requirements for printed circuit board surface finishes that are alternates to eutectic tin-lead. IPC-4554, a full...
IPC-4821 Amendment 1 provides the update of IPC-CF-148 to the correct IPC-4563, references the IPC-TM-650, Method 2.5.7.2 for correct Hi-Pot testing of these thin materials, uses proper reference for visual inspection by inspectors and finally, updated the first five material specification sheets (IPC-4821/1 through IPC-4821/5) that now show Effective Dates of April 2010. The Specification Sheet...
IPC-6012E-AM1是IPC-6012E的修订本,澄清了再流焊SnPb或HASL镀层中退润湿和焊料回缩之间的区别。 该修订本还为成品印制板的最小外部导体厚度提供了修订标准,并为内部电镀层的最小厚度提供了新的接受标准。
Bu döküman; kaplı delikiçine sahip olan veya olmayan tek yüzlü, çift yüzlü baskı devre kartları ve kör/gömülü geçiş deliklerine sahip olan veya olmayan çok katmanlı baskı devre kartları ile metal çekirdekli kartları içeren sert baskı devre kartlarının kalifikasyonunu ve performansını kapsamaktadır. Son kaplama ve yüzey kaplama gereklilikleri, iletkenler, delikler/geçiş delikleri, kabul testlerinin...
Enmienda 1 al IPC-7711/21C, el documento proporciona los procedimientos para la extracción y la instalación de componentes D-Pak.
Ergänzung 1 zu IPC-7711/21C-DE, das Dokument enthält Verfahren für das Entfernen und Montieren von D-Pak-Komponenten.
Coming Soon
IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)
IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)
IPC-2294: Design Standard for Printed Electronics on Rigid Substrates
IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates
IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards