Menu
Close
Contact IPC

Amendment

Your results

Document #

Language

Products

no-image-available

IPC-4556 - Amendment 1

Specification for Electroless Nickel/Electroless Palladium/Immersion Gold (ENEPIG) Plating for Printed Circuit Boards

Document #:
IPC-4556
Revision
Original Version
Product Type
Amendment
Released:  01/01/2016
Language
English
The Amendment 1 to IPC-4556 made the following changes to the base specification: a) It added the absolute value of the maximum thickness for the immersion gold of 0.070 μm [2.8 μin] that accompanies the statistically valid minimum immersion gold thickness; b) It added two more photomicrograph images to provide better information on identifying nickel hyper corrosion; c) It added the basis of...
no-image-available

IPC-4552 - Amendment 1

Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards

Document #:
IPC-4552
Revision
Original Version
Product Type
Amendment
Released:  06/12/2012
Language
English
Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards Amendment 1 to IPC-4552 replaces the Table 3-1 Requirements of Electroless Nickel Immersion Gold Plating plus also replaces all of sections 3.2.1 Immersion Nickel Thickness and 3.2.2 Immersion Gold Thickness in the original release of the IPC-4552. The Amendment 1 permits the use of thinner gold (≥4 µm...
no-image-available

IPC-4552 - Amendment 2

Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards

Document #:
IPC-4552
Revision
Original Version
Product Type
Amendment
Released:  09/01/2012
Language
English
Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards Amendment 2 to IPC-4552 is a new section in the original release of the IPC-4552. The Amendment 2 provides the “rules” by which any rework and/or repair of a printed board's ENIG surface finish is allowed. Effective September 2012.

IPC-9121 - Amendment 2

Troubleshooting for Printed Board Fabrication Processes

Document #:
IPC-9121
Revision
Original Version
Product Type
Amendment
Released:  09/01/2019
Language
English
The amendment 2 to IPC-9121 provides new troubleshooting topics on hole quality, laser drilling, microvias, drill smear, electroless nickel, organic solderability preservative (OSP) and rigid-flex boards.

IPC-9121 - Amendment 1

Troubleshooting for PCB Fabrication Processes

Document #:
IPC-9121
Revision
Original Version
Product Type
Amendment
Released:  04/02/2018
Language
English
IPC-9121 AM1 is an amendment to IPC-9121 which provides updates to the Hole Preparation/Protection and Interconnect Formation sections, covering troubleshooting topics and guidance on nonconductive plugging paste, microvias and pattern plating rim voids. IPC-9121 AM1 also includes a new section on Flexible Circuits.
no-image-available

IPC-4103 - Amendment 2

Specification for Base Materials for High Speed/High Frequency Applications

Document #:
IPC-4103
Revision
Original Version
Product Type
Amendment
Released:  11/01/2015
Language
English
The Amendment 2 to IPC-4103A-WAM1 made four fundamental changes to the base standard: All references to the epoxy curative of DICY (dicyandiamide) were removed; Opaque foreign inclusions were more specifically defined and limited; The optional properties of thermal conductivity for both laminates and bonding layers were added; and The dielectric constant (permittivity) ranges were specifically...
no-image-available

IPC-9121 - Amendment 1

印制板制造工艺问题解答 修订本1

Document #:
IPC-9121
Revision
Original Version
Product Type
Amendment
Released:  10/08/2020
Language
Chinese
Current Revision
本手册可供任何生产制造或采购印制板的人员作为基本资源。数百张真实的全彩色照片聚焦了650多个印刷电路板工艺缺陷，每个缺陷都有其分析原因和纠正措施。IPC-9121是取代1997年12月发布 的IPC-PE-740A中的PCB部分。2016年3月发布9121英文母标准，2018年年4月发布修订本1，修订本1于2020年4月翻译。详情参见目录。
no-image-available

IPC-A-610 - Revision F - Amendment 1

Acceptabilité des Assemblages Électroniques

Document #:
IPC-A-610
Revision
F
Product Type
Amendment
Released:  06/22/2017
Language
French
Ceci est un amendement à l’IPC-A-610-F, une norme reconnue selon un consensus industriel décrivant les exigences d’acceptabilité des assemblages électroniques. Les changements incluent, mais ne sont pas limités à, une révision des exigences de remplissage minimum des trous métallisés, des critères de vide pour les BGA à billes non affaissables et des critères de collage. Publiée en Décembre 2015
no-image-available

IPC-6012 - Revision D - Amendment 1

リジッドプリント板の認定および性能仕様-改定1

Document #:
IPC-6012
Revision
D
Product Type
Amendment
Released:  03/19/2019
Language
Japanese
本改訂は、IPC-6012Dで定められた銅ラップめっきの測定に関し、既存の許容基準に対し変更を加えるものである。本改訂は、新規設計品に施行される受け入れ要件の導入に伴い、旧来の設計品に追加的な品質認定作業を課すことのないよう、設計の有効日(2018年1月1日の前日まで、また、2018年1月1日以降)を基準に、クラス3製品の銅ラップめっきに二重基準を施行するものである。IPC-6012Dに記載する「銅ラップめっきの要求事項」の対象となる旧来の製品に対しては、本改訂は適用されない。8ページ。2019年1月翻訳。
no-image-available

IPC-A-610 - Revision F - Amendment 1

电子组件的可接受性 修订本1

Document #:
IPC-A-610
Revision
F
Product Type
Amendment
Released:  11/17/2016
Language
Chinese
该文件是IPC-A-610F的修订本，是电子组装可接受性要求的公认行业标准。变化包括，但不仅限于：镀通孔、最小填充要求、有非塌落焊料球的球栅阵列空洞标准和加固标准。
no-image-available

IPC-A-610 - Revision F - Amendment 1

Acceptabilitatea Ansamblurilor Electronice Amendament 1

Document #:
IPC-A-610
Revision
F
Product Type
Amendment
Released:  11/28/2016
Language
Romanian
Acesta este un amendament la standardul IPC-A-610F, un standard industrial recunoscut și adoptat, acoperind cerințe de acceptabilitate ale ansamblurilor electronice. Modificările includ, fără a se limita la acestea, o revizuire a cerințelor minime de umplere cu aliaj a găurilor metalizate, PTH, o schimbare a criteriilor pentru goluri la circuitele BGA cu bile fără turtire și cerințe noi pentru...
no-image-available

IPC/WHMA-A-620 - Revision B - Amendment 1

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Amendment
Released:  11/07/2014
Language
Hebrew
Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...
26-37 of 37

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-8401: Guidelines for In-Mold Electronics

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly