Products
IPC-4821 Amendment 1 provides the update of IPC-CF-148 to the correct IPC-4563, references the IPC-TM-650, Method 2.5.7.2 for correct Hi-Pot testing of these thin materials, uses proper reference for visual inspection by inspectors and finally, updated the first five material specification sheets (IPC-4821/1 through IPC-4821/5) that now show Effective Dates of April 2010. The Specification Sheet...
IPC-4421B-AM2 an amendment includes two extensive tables of finished fabric glass styles, one in SI (metric) units and the other in U.S. (English) units. IPC-4412B standard exhaustively covers the classification and requirements for finished fabrics that are formed by plain woven glass fiber yarns. Simply, these yarns are appropriately sized bundles of continuous filament, electrical-grade ("E"...
Amendment 1 to IPC-4562A re-inserts the specification sheet IPC-4562/6 (CU-W6) back into the IPC-4562A document that was previously removed when the standard was revised to it's a revision from its original release in April 2008. Also included in this Amendment 1 are all references to the IPC-4562/6 (CU-W6) in section 1.2.4.1, the Table A1, the summary of all specification sheets as well as the...
Amendment 1 to IPC-4202A modifies the standard by correcting editorial errors; converts metric dimensional units of measure to those commonly used throughout industry; describes the flammability method of test and requirements for very thin materials (VTM); and corrects property requirement errors in all nine specification sheets contained in this standard.
Specification for Finished Fabric Woven from "E" Glass for Printed Boards The Amendment 1 to IPC-4412B adds a new glass yarn [either SI identification => (4 1.32 1X0) or US identification => (BC 3750 1/0)] and a new light weight weave style => (1010) to the standard
Specification for Base Materials for High Speed/High Frequency Applications Amendment 1 generates a formalized record, for document control purposes, of corrections to ten separate sections in the main body of the standard; to the first 16 "legacy" specification sheets (IPC-4103/1 through IPC-4103/16); and to the 10 "new format" specification sheets for bonding layer materials (IPC-4103/500...
The amendment 2 to IPC-9121 provides new troubleshooting topics on hole quality, laser drilling, microvias, drill smear, electroless nickel, organic solderability preservative (OSP) and rigid-flex boards.
IPC-9121 AM1 is an amendment to IPC-9121 which provides updates to the Hole Preparation/Protection and Interconnect Formation sections, covering troubleshooting topics and guidance on nonconductive plugging paste, microvias and pattern plating rim voids. IPC-9121 AM1 also includes a new section on Flexible Circuits.
The Amendment 2 to IPC-4103A-WAM1 made four fundamental changes to the base standard: All references to the epoxy curative of DICY (dicyandiamide) were removed; Opaque foreign inclusions were more specifically defined and limited; The optional properties of thermal conductivity for both laminates and bonding layers were added; and The dielectric constant (permittivity) ranges were specifically...
Coming Soon
IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)
IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)
IPC-2294: Design Standard for Printed Electronics on Rigid Substrates
IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates
IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards