Your results
Document #
Language
Products
This specification sets requirements based on performance criteria for the use of Immersion Silver (IAg) as a surface finish for printed circuit boards. It is intended for use by chemical suppliers, printed board manufacturers, electronics manufacturing services (EMS) companies and original equipment manufacturers (OEM). IAg is a thin immersion deposit over copper. It is a multifunctional surface...
Establishes the general requirements for documentation necessary to fully describe end product printed boards, regardless of raw material, special fabrication requirements, layer count or end product usage. Includes master drawing requirements, board definition and artwork/phototooling. 94 pages. Revised May 1995.
IPC-1730A is a tool used to categorize a laminate manufacturer's capabilities, which furnishes customer access to detailed information. Used for single or multiple sites or locations, IPC-1730A simplifies auditing processes and reduces the frequency of audits, decreasing paperwork and improving efficiency. The program includes a description, approval and certification profile and a quality profile...
Developed by the OEM council of the IPC, IPC-1720A categorizes electronic assembly manufacturer capabilities and supplies the OEM customer with detailed, substantive information. This program simplifies auditing processes and reduces the frequency of audits, thereby decreasing paperwork and improving efficiency. Company and Site Description, Site Capability Snap Shot, Equipment Profile (Pre-site...
This document standardizes the requirements for power conversion devices (PCDs) for the computer and telecommunications industries. The phrase “power conversion devices” refers to ac to dc and dc to dc modules, converters and power supplies. This specification sets the requirements for design; qualification testing; conformance testing and manufacturing quality/reliability processes, but does not...
IPC-7094A describes the design and assembly challenges for implementing flip chip technology in a direct chip attach (DCA) assembly. The effect of bare-die or die-size components in a flip chip format has an impact on component characteristics and dictates the appropriate assembly methodology. The IPC-7094A standard focuses on design, assembly methodology, critical inspection, repair and...
Surface Insulation Resistance (SIR) testing is a tool used not only for characterization testing of production processes such as solder masks, soldering flux, and conformal coatings, but also for examining the electrochemical reactions at each stage of the electronic assembly production process. This handbook covers the terminology, theories, test procedures and test vehicles of SIR testing...
The IPC-1755A standard establishes the requirements for exchanging data between suppliers and their customers in regard to the responsible resourcing of minerals. The IPC-1755As standard originally addressed conflict minerals within the scope of the Dodd-Frank Act in the US. IPC-1755A expands the scope of this document to address global responsible minerals sourcing.
This standard provides a marking and labeling system that aids in assembly, rework, repair and recycling and provides for the identification of: those assemblies that are assembled with lead-containing or lead-free solder; components that have lead-containing or lead-free second level interconnect terminal finishes and materials; the maximum component temperature not to be exceeded during assembly...
The IPC-D-620A standard is the cable and wiring harness, systems-level design requirements companion to IPC/WHMA-A-620 and its associated space addendum. The intent of IPC-D-620A is to set forth the general design requirements for electrical wiring harnesses and cable assemblies. The IPC-D-620A is intended for use by the design engineer, manufacturing engineer, quality engineer, or other...
Covers the information requirements for the procurement of material, box build, assembly, system integration, inspection, test, burn-in, delivery and/or distribution of electronic assemblies. 5 pages. Released January 2004.
Covers the nomenclature, definitions and requirements for reinforcement made from nonwoven para-aramid fibers. Para-aramid reinforcement is primarily used in PCBs for HDI and high speed/high frequency applications. IPC-4411A also includes specification sheets, which can be used when selecting and purchasing nonwoven para-aramid reinforcement. Includes the incorporation of 14 new nonwoven para...
This document is a general overview of computer aided design and its processes, techniques, considerations and problem areas with respect to printed circuit design. Describes the CAD design process from initial input package requirements to engineering change. 44 pages. Revised February 1988.
This document provides manufacturing and design considerations, input data requirements, test coupons, process control, tape and preform artwork, cut and strip artwork, vector photoplotting, rasterplotting, direct imaging, measurement and quality assurance. 68 pages. Revised June 1991.
This is the document all process engineers must have! Useful for day-to-day problem solving, it contains case histories of problems and corrective action in the design, manufacture, assembly and testing of printed wiring products. Each section has been updated to reflect today's manufacturing challenges. Sections address documentation, phototooling, raw materials, mechanical operations, hole...
Covers the requirements for copper/invar/copper (CIC), copper/molybdenum/ copper (CMC) and three-layer composites for use in electronic applications.
This document provides the designer/user with guideline information related to the use of pressure sensitive adhesives (PSAs) for fabrication and assembly of flexible, rigid or rigid-flex printed boards, membrane switches and component attachments. It also provides information on adhesive types available, their inherent strengths, weaknesses, limitations and correct processes needed for creating...
Establishes nomenclature and requirements for solid carbide twist drills with four-faceted drill points used in the fabrication of printed boards. 9 pages. Revised April 1994.
This specification establishes the qualification and performance requirements for encapsulated discrete wire interconnection boards with wires that terminate in plated holes. 62 pages. Revised May 1990.
The IPC-1602 standard provides requirements intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging materials types and methods, production environment, handling and transport of product, and establishing baking profiles for moisture removal. IPC-1602 is now providing requirements that can be called...
This standard is the first of its kind for IPC; the first acceptability standard for electronic enclosures. It contains acceptability criteria that pertain to the "box build" of the assembly process. This standard has been written to direct manufacturers and end users of electronic enclosures of electrical and electronic equipment to understand the best practices to meet requirements, ensuring the...
This standard establishes the generic requirements for a document set describing electronic products, and the methodology used for revision control and configuration management of the information. The generic descriptions apply to the entire document set and are used to define and maintain the electronic product. The methodology permits different grades of completeness of the documentation, as...
The IPC-4555 standard covers the requirements and testing for organic solderability preservatives (OSP) processes for printed boards to be used primarily for electrical and electronic circuits. Details for lead free soldering are covered in IPC-4555
This standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. This standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical assembly and...
This document is intended to clarify terms used in the area of fluid dispensing. As is often the case, different terms are used by different manufacturers to convey a similar meaning. Common interchangeable terms are shown in parenthesis and the reader should not infer one term is preferred over the other.
Coming Soon
IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)
IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)
IPC-2294: Design Standard for Printed Electronics on Rigid Substrates
IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates
IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards