Standard Only

Your results

Products

Document #:

IPC-QL-653

Revision

Product Type

Standard Only

Released: 11/01/1997

Language

English

Current Revision

This specification establishes the certification requirements for facilities that inspect/test printed boards, components and materials. This specification is intended to provide a minimum standardized basis for evaluating or auditing a technically oriented inspection/testing facility. Revised November 1997. 15 pages.

Document #:

IPC-9592

Revision

Product Type

Standard Only

Released: 01/14/2013

Language

English

Current Revision

This document standardizes the requirements for power conversion devices (PCDs) for the computer and telecommunications industries. The phrase “power conversion devices” refers to ac to dc and dc to dc modules, converters and power supplies. This specification sets the requirements for design; qualification testing; conformance testing and manufacturing quality/reliability processes, but does not...

Document #:

IPC-7094

Revision

Product Type

Standard Only

Released: 02/14/2018

Language

English

Current Revision

IPC-7094A describes the design and assembly challenges for implementing flip chip technology in a direct chip attach (DCA) assembly. The effect of bare-die or die-size components in a flip chip format has an impact on component characteristics and dictates the appropriate assembly methodology. The IPC-7094A standard focuses on design, assembly methodology, critical inspection, repair and...

Document #:

IPC-1720

Revision

Product Type

Standard Only

Released: 08/02/2004

Language

English

Current Revision

Developed by the OEM council of the IPC, IPC-1720A categorizes electronic assembly manufacturer capabilities and supplies the OEM customer with detailed, substantive information. This program simplifies auditing processes and reduces the frequency of audits, thereby decreasing paperwork and improving efficiency. Company and Site Description, Site Capability Snap Shot, Equipment Profile (Pre-site...

Document #:

IPC-9201

Revision

Product Type

Standard Only

Released: 09/19/2007

Language

English

Current Revision

Surface Insulation Resistance (SIR) testing is a tool used not only for characterization testing of production processes such as solder masks, soldering flux, and conformal coatings, but also for examining the electrochemical reactions at each stage of the electronic assembly production process. This handbook covers the terminology, theories, test procedures and test vehicles of SIR testing...

Document #:

IPC/JEDEC-J-STD-609

Revision

Product Type

Standard Only

Released: 11/01/2016

Language

English

Current Revision

This standard provides a marking and labeling system that aids in assembly, rework, repair and recycling and provides for the identification of: those assemblies that are assembled with lead-containing or lead-free solder; components that have lead-containing or lead-free second level interconnect terminal finishes and materials; the maximum component temperature not to be exceeded during assembly...

Document #:

IPC-D-326

Revision

Product Type

Standard Only

Released: 01/01/2004

Language

English

Current Revision

Covers the information requirements for the procurement of material, box build, assembly, system integration, inspection, test, burn-in, delivery and/or distribution of electronic assemblies. 5 pages. Released January 2004.

Document #:

IPC-PE-740

Revision

Product Type

Standard Only

Released: 12/01/1997

Language

English

Current Revision

This is the document all process engineers must have! Useful for day-to-day problem solving, it contains case histories of problems and corrective action in the design, manufacture, assembly and testing of printed wiring products. Each section has been updated to reflect today's manufacturing challenges. Sections address documentation, phototooling, raw materials, mechanical operations, hole...

Document #:

IPC-CF-152

Revision

Product Type

Standard Only

Released: 12/01/1997

Language

English

Current Revision

Covers the requirements for copper/invar/copper (CIC), copper/molybdenum/ copper (CMC) and three-layer composites for use in electronic applications.

Document #:

IPC-FC-234

Revision

Product Type

Standard Only

Released: 12/23/2014

Language

English

Current Revision

This document provides the designer/user with guideline information related to the use of pressure sensitive adhesives (PSAs) for fabrication and assembly of flexible, rigid or rigid-flex printed boards, membrane switches and component attachments. It also provides information on adhesive types available, their inherent strengths, weaknesses, limitations and correct processes needed for creating...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 05/26/2015

Language

English

This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 07/17/2013

Language

English

This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 10/18/2011

Language

English

This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...

Document #:

IPC-TM-650

Revision

Original Version

Product Type

Standard Only

Language

English

Current Revision

Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.

Document #:

IPC-5262

Revision

Original Version

Product Type

Standard Only

Released: 10/17/2022

Language

English

Current Revision

The IPC-5262 prescribes the minimum design, critical process and acceptance requirements for the application of polymeric materials to electrical/electronic components, modules, printed wiring assemblies and other elements thereof. The intent of IPC-5262 is to establish a baseline of requirements, procedures, practices and process attributes based on lessons learned and best practices that have...

Document #:

IPC-6012

Revision

Product Type

Standard Only

Released: 02/20/2020

Language

English

IPC-6012E specification covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical...

Document #:

IPC/EIA-J-STD-028

Revision

Original Version

Product Type

Standard Only

Released: 08/01/1999

Language

English

Current Revision

This standard establishes construction detail requirements for bumps and other terminal structures used for Flip Chip Scale carriers. The specific standards for different terminations are appropriately matched to a particular interconnection process and include such diverse terminations as solder bumps, columns, non-melting stand-offs and conductive polymer deposits. The document articulates a set...

Document #:

IPC-9191

Revision

Original Version

Product Type

Standard Only

Released: 11/01/1999

Language

English

Current Revision

IPC-9191 reflects the principals of statistical process control (SPC) represented by ISO/DIS 11462-1, Guidelines for Implementation of Statistical Process Control (SPC) -- Part 1: Elements of SPC. This document outlines the SPC philosophy, implementation strategies, tools, and techniques used for relating process control and capability to final product requirements. Supersedes IPC-PC-90.

Document #:

IPC-4781

Revision

Original Version

Product Type

Standard Only

Released: 05/30/2008

Language

English

Current Revision

The industry's first specification for the evaluation of a legend and/or marking ink material for the determination of acceptability of use in a standard printed board system. IPC-4781 provides coverage for adhesion, material qualification and testing, resistances to solvents, requirements for resistance to lead-free solders, and electrical requirements. 17 pages. Released May 2008.

Document #:

IPC-CA-821

Revision

Original Version

Product Type

Standard Only

Released: 01/01/1995

Language

English

Current Revision

Covers requirements and test methods for thermally conductive dielectric adhesives used to bond components in place. Permanent, removable and self-shimming adhesives are addressed. 18 pages. Released January 1995.

Document #:

IPC-6015

Revision

Original Version

Product Type

Standard Only

Released: 02/01/1998

Language

English

Current Revision

Establishes the specific requirements for organic mounting structures used to interconnect chip components, which in combination form the completed functional organic single-chip module (SCM-L) or organic multichip module (MCM-L) assembly. Includes the quality and reliability assurance requirements that must be met for their acquisition. For use with IPC-6011. 25 pages. Released February 1998.

Document #:

IPC-SMEMA 7

Revision

Original Version

Product Type

Standard Only

Released: 02/12/2007

Language

English

Current Revision

This document is intended to clarify terms used in the area of fluid dispensing. As is often the case, different terms are used by different manufacturers to convey a similar meaning. Common interchangeable terms are shown in parenthesis and the reader should not infer one term is preferred over the other.

Document #:

IPC-5704

Revision

Original Version

Product Type

Standard Only

Released: 01/27/2010

Language

English

Current Revision

Printed board quality encompasses many parameters, cleanliness being one important parameter. This document defines the recommended general requirements for the cleanliness of unpopulated (bare) single, double-sided and multilayer printed boards. Coverage is given to Ion Chromatography (IC) testing and Ionic cleanliness testing for process control. 6 pages. Released December 2009.

Document #:

IPC-D-279

Revision

Original Version

Product Type

Standard Only

Released: 07/01/1996

Language

English

Current Revision

Establishes design concepts, guidelines and procedures for reliable printed wiring assemblies. Focuses on SMT or mixed technology PWAs, specifically addressing the interconnect structure and the solder joint itself. Discusses substrates, components, attachment materials, coatings and assembly processes and testing considerations. In addition, this document contains detailed appendices covering...

Document #:

IPC-1331

Revision

Original Version

Product Type

Standard Only

Released: 03/01/2000

Language

English

Current Revision

This voluntary standard establishes minimum requirements for the design, installation, operation and maintenance of electrically heated process equipment in order to minimize electrical hazards and prevent fires that may occur in combustible tanks, tank liners and drying equipment.