Standard Only

Your results

Products

Document #:

IPC-D-640

Revision

Product Type

Standard Only

Released: 05/31/2022

Language

English

Current Revision

The IPC-D-620A standard is the cable and wiring harness, systems-level design requirements companion to IPC/WHMA-A-620 and its associated space addendum. The intent of IPC-D-620A is to set forth the general design requirements for electrical wiring harnesses and cable assemblies. The IPC-D-620A is intended for use by the design engineer, manufacturing engineer, quality engineer, or other...

Document #:

IPC-9709

Revision

Product Type

Standard Only

Released: 11/29/2021

Language

English

Current Revision

The IPC-9709A standard guideline document establishes an Acoustic Emission (AE) method to enhance evaluation of the performance and reliability of surface mount attachments of electronic assemblies during mechanical loading.

Document #:

IPC-PE-740

Revision

Product Type

Standard Only

Released: 12/01/1997

Language

English

Current Revision

This is the document all process engineers must have! Useful for day-to-day problem solving, it contains case histories of problems and corrective action in the design, manufacture, assembly and testing of printed wiring products. Each section has been updated to reflect today's manufacturing challenges. Sections address documentation, phototooling, raw materials, mechanical operations, hole...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 05/26/2015

Language

English

This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 07/17/2013

Language

English

This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...

Document #:

IPC-A-610

Revision

Product Type

Standard Only

Released: 10/07/2020

Language

English

IPC-A-610H is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610H standard includes a general update to the document, introduces several new surface mount component types and removes target conditions. Participants from 29 countries provided their input and expertise to bring this document to the electronics industry. This is a must-have for...

Document #:

IPC-J-STD-001

Revision

Product Type

Standard Only

Released: 10/07/2020

Language

English

IPC-J-STD-001H is recognized globally for its criteria on soldering processes and materials. Updated with participants from 27 countries providing input and expertise, the IPC-J-STD-001H standard brings the latest criteria to the industry including guidance on the use of x-ray to inspect through-hole solder conditions that are not visible by any other means. IPC-J-STD-001H is a must-have for those...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 10/18/2011

Language

English

This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...

Document #:

IPC/WHMA-A-620

Revision

Original Version

Product Type

Standard Only

Released: 01/01/2012

Language

English

Current Revision

These tables are from IPC/WHMA-A-620 Revision B Chapter 19 Testing. They are provided in an electronic format that permits users to edit the tables to add user-specific criteria. These files are authorized for copying/reproduction.

Document #:

IPC-7527

Revision

Original Version

Product Type

Standard Only

Released: 05/17/2012

Language

English

Current Revision

This standard is a collection of visual quality acceptability criteria for solder paste printing. It provides a standardized language for solder paste characterization. It provides users with common descriptions and potential causes for solder paste deposits. The standard provides valuable insights to the solder paste printing operations which can be used in troubleshooting of the printing process...

Document #:

IPC-SMEMA 7

Revision

Original Version

Product Type

Standard Only

Released: 02/12/2007

Language

English

Current Revision

This document is intended to clarify terms used in the area of fluid dispensing. As is often the case, different terms are used by different manufacturers to convey a similar meaning. Common interchangeable terms are shown in parenthesis and the reader should not infer one term is preferred over the other.

Document #:

IPC/JEDEC-9703

Revision

Original Version

Product Type

Standard Only

Released: 03/18/2009

Language

English

Current Revision

Establishes mechanical drop and shock and test guidelines for assessing solder joint reliability of printed board assemblies from system to component level. This document addresses methods to define mechanical shock use-conditions, methods to define system level, system printed board level and component test board level testing that correlate to such use conditions and guidance on the use of...

Document #:

JEDEC/IPC-JP002

Revision

Original Version

Product Type

Standard Only

Released: 03/01/2006

Language

English

Current Revision

This document will provide insight into the theory behind tin whisker formation as it is known today and, based on this knowledge, potential mitigation practices that may delay the onset of, or prevent tin whisker formation. The potential effectiveness of various mitigation practices will also be briefly discussed. References behind each of the theories and mitigation practices are provided. It...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 01/21/2020

Language

English

IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...

Document #:

IPC-5262

Revision

Original Version

Product Type

Standard Only

Released: 10/17/2022

Language

English

Current Revision

The IPC-5262 prescribes the minimum design, critical process and acceptance requirements for the application of polymeric materials to electrical/electronic components, modules, printed wiring assemblies and other elements thereof. The intent of IPC-5262 is to establish a baseline of requirements, procedures, practices and process attributes based on lessons learned and best practices that have...

Document #:

IPC-J-STD-001

Revision

Product Type

Standard Only

Released: 10/31/2017

Language

English

J-STD-001 is recognized globally for its criteria on soldering processes and materials. Updated with participants from 18 countries providing input and expertise, this document brings the latest criteria along with new graphics to the industry for ease of use and comprehension. This is a must-have for those in the electronics industry with an interest in the process and acceptance criteria for...

Document #:

IPC-A-610

Revision

Product Type

Standard Only

Released: 10/31/2017

Language

English

IPC-A-610 is the most widely used electronics assembly acceptance document. Updated with participants from 17 countries providing input and expertise, this document brings the latest criteria along with many new and revised graphics to the industry. This is a must-have for inspectors, operators and others with an interest in the acceptance criteria for electronic assemblies. IPC-A-610 is developed...

Document #:

IPC-TM-650

Revision

Original Version

Product Type

Standard Only

Language

English

Current Revision

Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.

Document #:

IPC-FA-251

Revision

Original Version

Product Type

Standard Only

Released: 02/01/1992

Language

English

Current Revision

Guidelines for the assembly of components and mounting hardware to single- and double-sided flexible printed wiring. These guidelines describe the type of materials and processes that may be used to accomplish proper electronic assembly. 30 pages. Released February 1992.

Document #:

IPC-SM-785

Revision

Original Version

Product Type

Standard Only

Released: 11/01/1992

Language

English

Current Revision

Guidelines for accelerated reliability testing of surface mount solder attachments when evaluating and extrapolating the results of these tests towards actual use environments of electronic assemblies. 50 pages. Released November 1992.

Document #:

IPC-S-816

Revision

Original Version

Product Type

Standard Only

Released: 07/01/1993

Language

English

Current Revision

Why waste time looking for answers? This handy, easy-to-use troubleshooting guide lists all types of processing problems and solutions for surface mount assembly. Covers bridging, skips, misalignment, placement and more. 38 pages. Released July 1993.

Document #:

IPC-9111

Revision

Original Version

Product Type

Standard Only

Released: 02/13/2019

Language

English

Current Revision

The IPC-9111 handbook is a valuable resource for anyone involved in manufacturing or purchasing printed board assemblies. Issues in the assembly process are presented along with possible causes and actions to take to resolve them. Photos are provided throughout the document to assist the reader. IPC-9111 supersedes the printed board assembly sections of IPC-PE-740A.

Document #:

IPC-0040

Revision

Original Version

Product Type

Standard Only

Released: 05/01/2003

Language

English

Current Revision

This document addresses the implementation of optical and optoelectronic packaging technologies. The areas discussed include: technology choices, design considerations, material properties, component mounting and interconnecting structures, assembly processes, testing, application, rework, and reliability of completed optoelectronic products. Optoelectronic packaging technologies include active...

Document #:

IPC-1331

Revision

Original Version

Product Type

Standard Only

Released: 03/01/2000

Language

English

Current Revision

This voluntary standard establishes minimum requirements for the design, installation, operation and maintenance of electrically heated process equipment in order to minimize electrical hazards and prevent fires that may occur in combustible tanks, tank liners and drying equipment.

Document #:

ECA/IPC/JEDEC-J-STD-075

Revision

Original Version

Product Type

Standard Only

Released: 09/03/2008

Language

English

Current Revision

J-STD-075 picks up where J-STD-020 left off by providing test methods to classify worst-case thermal process limitations for electronic components. Classification is referenced to common industry wave and reflow solder profiles including lead-free processing. The classifications represent maximum process sensitivity levels and do not establish rework conditions or recommended processes for an...