Standard Only

Your results

Products

Document #:

IPC-9202

Revision

Product Type

Standard Only

Released: 10/28/2022

Language

English

Current Revision

The IPC-9202A, Material and Process Characterization/Qualification Test Protocol that records changes in Surface Insulation Resistance (SIR) on a representative sample of a printed circuit assembly (PCA). It quantifies any deleterious effects that might arise from solder flux or other process residues left on external surfaces after soldering, which can cause unwanted electro-chemical reactions...

Document #:

IPC-7091

Revision

Product Type

Standard Only

Released: 01/13/2023

Language

English

Current Revision

This document describes the design and assembly challenges and ways to address those challenges for implementing 3D component technology. Recognizing the eﬀects of combining multiple uncased semiconductor die elements in a single-package format can impact individual component characteristics and can dictate suitable assembly methodology. The information contained in this standard focuses on...

Document #:

IPC-4553

Revision

Product Type

Standard Only

Released: 06/16/2009

Language

English

Current Revision

This specification sets requirements based on performance criteria for the use of Immersion Silver (IAg) as a surface finish for printed circuit boards. It is intended for use by chemical suppliers, printed board manufacturers, electronics manufacturing services (EMS) companies and original equipment manufacturers (OEM). IAg is a thin immersion deposit over copper. It is a multifunctional surface...

Document #:

IPC/JEDEC-9704

Revision

Product Type

Standard Only

Released: 02/03/2012

Language

English

Current Revision

Strain gage testing allows for objective analysis of the strain and strain rate levels to which a surface mount package may be subjected to during assembly, test and operation. Excessive strain can result in various failure modes for different solder alloys, package types, surface finishes or laminate materials. This document describes specific guidelines for strain gage testing during the printed...

Document #:

IPC-QL-653

Revision

Product Type

Standard Only

Released: 11/01/1997

Language

English

Current Revision

This specification establishes the certification requirements for facilities that inspect/test printed boards, components and materials. This specification is intended to provide a minimum standardized basis for evaluating or auditing a technically oriented inspection/testing facility. Revised November 1997. 15 pages.

Document #:

IPC-7094

Revision

Product Type

Standard Only

Released: 02/14/2018

Language

English

Current Revision

IPC-7094A describes the design and assembly challenges for implementing flip chip technology in a direct chip attach (DCA) assembly. The effect of bare-die or die-size components in a flip chip format has an impact on component characteristics and dictates the appropriate assembly methodology. The IPC-7094A standard focuses on design, assembly methodology, critical inspection, repair and...

Document #:

IPC-9201

Revision

Product Type

Standard Only

Released: 09/19/2007

Language

English

Current Revision

Surface Insulation Resistance (SIR) testing is a tool used not only for characterization testing of production processes such as solder masks, soldering flux, and conformal coatings, but also for examining the electrochemical reactions at each stage of the electronic assembly production process. This handbook covers the terminology, theories, test procedures and test vehicles of SIR testing...

Document #:

IPC/JEDEC-J-STD-609

Revision

Product Type

Standard Only

Released: 11/01/2016

Language

English

Current Revision

This standard provides a marking and labeling system that aids in assembly, rework, repair and recycling and provides for the identification of: those assemblies that are assembled with lead-containing or lead-free solder; components that have lead-containing or lead-free second level interconnect terminal finishes and materials; the maximum component temperature not to be exceeded during assembly...

Document #:

IPC-9709

Revision

Product Type

Standard Only

Released: 11/29/2021

Language

English

Current Revision

The IPC-9709A standard guideline document establishes an Acoustic Emission (AE) method to enhance evaluation of the performance and reliability of surface mount attachments of electronic assemblies during mechanical loading.

Document #:

IPC-CF-152

Revision

Product Type

Standard Only

Released: 12/01/1997

Language

English

Current Revision

Covers the requirements for copper/invar/copper (CIC), copper/molybdenum/ copper (CMC) and three-layer composites for use in electronic applications.

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 05/26/2015

Language

English

This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 07/17/2013

Language

English

This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...

Document #:

IPC-A-610

Revision

Product Type

Standard Only

Released: 10/07/2020

Language

English

IPC-A-610H is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610H standard includes a general update to the document, introduces several new surface mount component types and removes target conditions. Participants from 29 countries provided their input and expertise to bring this document to the electronics industry. This is a must-have for...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 10/18/2011

Language

English

This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...

Document #:

IPC/WHMA-A-620

Revision

Original Version

Product Type

Standard Only

Released: 01/01/2012

Language

English

Current Revision

These tables are from IPC/WHMA-A-620 Revision B Chapter 19 Testing. They are provided in an electronic format that permits users to edit the tables to add user-specific criteria. These files are authorized for copying/reproduction.

Document #:

IPC-A-630

Revision

Original Version

Product Type

Standard Only

Released: 10/04/2013

Language

English

Current Revision

This standard is the first of its kind for IPC; the first acceptability standard for electronic enclosures. It contains acceptability criteria that pertain to the "box build" of the assembly process. This standard has been written to direct manufacturers and end users of electronic enclosures of electrical and electronic equipment to understand the best practices to meet requirements, ensuring the...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 01/21/2020

Language

English

IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...

Document #:

IPC-A-610

Revision

Product Type

Standard Only

Released: 10/31/2017

Language

English

IPC-A-610 is the most widely used electronics assembly acceptance document. Updated with participants from 17 countries providing input and expertise, this document brings the latest criteria along with many new and revised graphics to the industry. This is a must-have for inspectors, operators and others with an interest in the acceptance criteria for electronic assemblies. IPC-A-610 is developed...

Document #:

IPC-TM-650

Revision

Original Version

Product Type

Standard Only

Language

English

Current Revision

Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.

Document #:

IPC-4555

Revision

Original Version

Product Type

Standard Only

Released: 05/31/2022

Language

English

Current Revision

The IPC-4555 standard covers the requirements and testing for organic solderability preservatives (OSP) processes for printed boards to be used primarily for electrical and electronic circuits. Details for lead free soldering are covered in IPC-4555

Document #:

IPC-SM-785

Revision

Original Version

Product Type

Standard Only

Released: 11/01/1992

Language

English

Current Revision

Guidelines for accelerated reliability testing of surface mount solder attachments when evaluating and extrapolating the results of these tests towards actual use environments of electronic assemblies. 50 pages. Released November 1992.

Document #:

IPC-6012

Revision

Product Type

Standard Only

Released: 02/20/2020

Language

English

IPC-6012E specification covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical...

Document #:

IPC/EIA-J-STD-028

Revision

Original Version

Product Type

Standard Only

Released: 08/01/1999

Language

English

Current Revision

This standard establishes construction detail requirements for bumps and other terminal structures used for Flip Chip Scale carriers. The specific standards for different terminations are appropriately matched to a particular interconnection process and include such diverse terminations as solder bumps, columns, non-melting stand-offs and conductive polymer deposits. The document articulates a set...

Document #:

IPC/JEDEC-9703

Revision

Original Version

Product Type

Standard Only

Released: 03/18/2009

Language

English

Current Revision

Establishes mechanical drop and shock and test guidelines for assessing solder joint reliability of printed board assemblies from system to component level. This document addresses methods to define mechanical shock use-conditions, methods to define system level, system printed board level and component test board level testing that correlate to such use conditions and guidance on the use of...

Document #:

IPC-9191

Revision

Original Version

Product Type

Standard Only

Released: 11/01/1999

Language

English

Current Revision

IPC-9191 reflects the principals of statistical process control (SPC) represented by ISO/DIS 11462-1, Guidelines for Implementation of Statistical Process Control (SPC) -- Part 1: Elements of SPC. This document outlines the SPC philosophy, implementation strategies, tools, and techniques used for relating process control and capability to final product requirements. Supersedes IPC-PC-90.