Standard Only

Your results

Products

Document #:

IPC/JEDEC-9703

Revision

Original Version

Product Type

Standard Only

Released: 03/18/2009

Language

English

Current Revision

Establishes mechanical drop and shock and test guidelines for assessing solder joint reliability of printed board assemblies from system to component level. This document addresses methods to define mechanical shock use-conditions, methods to define system level, system printed board level and component test board level testing that correlate to such use conditions and guidance on the use of...

Document #:

IPC/JPCA-6901

Revision

Original Version

Product Type

Standard Only

Released: 08/26/2015

Language

English

Current Revision

This standard establishes a Market Classification System and Level Classification System for printed electronics assemblies and provides a list of performance criteria and testing methods. It provides a standardized product category structure for designing and manufacturing printed electronics and assemblies which conform to industry-established performance metrics as determined by accepted...

Document #:

ECA/IPC/JEDEC-J-STD-075

Revision

Original Version

Product Type

Standard Only

Released: 09/03/2008

Language

English

Current Revision

J-STD-075 picks up where J-STD-020 left off by providing test methods to classify worst-case thermal process limitations for electronic components. Classification is referenced to common industry wave and reflow solder profiles including lead-free processing. The classifications represent maximum process sensitivity levels and do not establish rework conditions or recommended processes for an...

Document #:

IPC/JEDEC-9301

Revision

Original Version

Product Type

Standard Only

Released: 01/15/2019

Language

English

Current Revision

The IPC/JEDEC-9301document is an effort to standardize and document some of the basic tenets of a typical Finite Element Analysis (FEA) model, as well as, to educate new designers (and in some cases even experienced designers) on the basic information and best practices that should be captured and provided to technical reviewers of the results of FEA data.

Document #:

IPC-7621

Revision

Original Version

Product Type

Standard Only

Released: 02/14/2018

Language

English

Current Revision

Encapsulation, for the purpose of IPC-7621 standard, is defined as a low pressure molded thermoplastic, e.g., polyamide, which is brought to a liquid state and injection molded and (rather quickly) returned to a temperature below its melting point., forming a durable yet pliable (rubbery-like) form. The desired performance characteristics of low pressure molding (LPM) encapsulation depend on the...

Document #:

IPC-9241

Revision

Original Version

Product Type

Standard Only

Released: 01/13/2017

Language

English

Current Revision

This standard is intended as a guideline in the proper preparation of a metallographic sample (microsection) of a printed board. The finished microsection is used for evaluating the quality of the laminate system and plated structures (e.g. PTHs and vias). Microsection sample preparation is regarded by many as a highly developed skill. The guidelines in this standard discuss the many variables and...

Document #:

IPC-9708

Revision

Original Version

Product Type

Standard Only

Released: 12/14/2010

Language

English

Current Revision

Mechanical bend and shock tests are routinely performed on SMT assemblies to ensure that they can sustain anticipated production, handling and end use conditions. The strains and strain rates applied to SMT assemblies during bend and shock testing can lead to a variety of failure modes in the vicinity of the solder joints. This document provides test methods to evaluate the susceptibility of...

Document #:

IPC-CI-408

Revision

Original Version

Product Type

Standard Only

Released: 01/01/1994

Language

English

Current Revision

Provides information on design characteristics and the application of solderless surface mount connectors, including conductive adhesives to aid IC package and board interconnection. 34 pages. Released January 1994.

Document #:

IPC-SM-840

Revision

Product Type

Standard Only

Released: 04/30/2007

Language

English

Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reﬂect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

Document #:

IPC-6903

Revision

Product Type

Standard Only

Released: 10/29/2015

Language

English

This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.

Document #:

IPC-9706

Revision

Original Version

Product Type

Standard Only

Released: 01/14/2014

Language

English

Current Revision

Survey-based study presents data and analysis on the EMS industry, examining trends in sources of revenue, revenue per employee, services offered, markets served, manufacturing technology, capital investment, spending on equipment and materials and market size including forecasts and potential for market expansion. This study is based on data provided by a representative sample of 120 EMS...

Document #:

IPC-5702

Revision

Original Version

Product Type

Standard Only

Released: 06/01/2007

Language

English

Current Revision

Every electronics manufacturer, whether an original equipment manufacturer (OEM) or electronics manufacturing services (EMS) company, must determine if the unpopulated printed boards entering the assembly process have an adequate level of cleanliness. The question of “how clean is clean enough?” is one that has no definitive answer, as there is no "golden number" for board cleanliness. The issue...

Document #:

IPC-9701

Revision

Product Type

Standard Only

Released: 02/01/2006

Language

English

Provides specific test methods to evaluate the performance and reliability of surface mount solder attachments of electronic assemblies. Establishes levels of performance and reliability of the solder attachments of surface mount devices to rigid, flexible and rigid-flex circuit structures. When used with IPC-SM-785, it provides an understanding of the physics of SMT solder joint failure and an...

Document #:

IPC-7095

Revision

Product Type

Standard Only

Released: 01/28/2013

Language

English

Implementing ball grid array (BGA) and fine-pitch ball grid array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095C delivers useful and practical information to anyone currently using BGAs or FBGAs. Many issues have become especially important due to the change in the alloys of the ball, the ball shape, and the attachment procedures...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 06/30/2015

Language

French

Current Revision

Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...

Document #:

IPC-7095

Revision

Product Type

Standard Only

Released: 04/02/2008

Language

English

Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095B delivers useful and practical information to anyone currently using BGAs or considering a conversion to area array packaging formats. This has become especially important due to the change in the alloys being used, both...

Document #:

IPC-7095

Revision

Product Type

Standard Only

Released: 10/01/2004

Language

English

Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. Revision A of this document delivers useful and practical information to anyone who is currently using BGAs or is considering a conversion to area array packaging formats. In addition to providing guidelines for BGA inspection...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 01/13/2023

Language

Chinese

Current Revision

IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 02/03/2015

Language

German

Current Revision

Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...

Document #:

IPC-7525

Revision

Product Type

Standard Only

Released: 10/24/2011

Language

English

This document provides guidelines for the design and fabrication of stencils for solder paste and surface mount adhesive with discussion on through-hole and mixed technology. This includes differences for tin lead and lead-free solder paste, overprint, two-print and step stencil designs. A sample order form and user inspection checklist are also included.

Document #:

IPC-SM-840

Revision

Product Type

Standard Only

Released: 11/20/2012

Language

Chinese

Current Revision

简要介绍（英文）建立了液态和干膜阻焊材料的评估要求，以及确定其用在一个标准的印制板系统上的可接受性要求。IPC-SM-840提供了两个等级的要求，T级和H级，以反映基于行业/最终用户要求对功能性的要求及测试严格程度的差别。覆盖了附着力、材料鉴定、耐溶剂、以及电气要求。E版本包含了挠性覆盖材料的要求，在已蚀刻的导体和其他导电图形上提供挠性的介质保护层。共19页。2010年12月发布。2012年10月翻

Document #:

IPC-9691

Revision

Product Type

Standard Only

Released: 04/11/2018

Language

Chinese

Current Revision

本文件是IPC电化学迁移（ECM）技术组的成果。本文件的目的是为如何更好地使用IPC-TM-650测试方法2.6.25《耐导电阳极丝（CAF）测试》以及其他内部电化学迁移（ECM）测试提供指南，以评估机械应力、层压板材料断裂、离子污染、压合层压板前湿气含量以及其它材料加工特性在层压材料中形成的导电路径，例如导电阳极丝（CAF），一种特殊类型的ECM失效模式，对测试结果的影响。该内部ECM测试方法提供了一个已经证实的标准，用于确定由于通孔偏移从而显著降低内部导体间绝缘电阻情况的风险，该现象发生在层压板内部，而不是在印制板的表面上

Document #:

IPC-9203

Revision

Product Type

Standard Only

Released: 01/02/2024

Language

Japanese

Current Revision

材料の適合性を検証するにあたり、業界では種々のテストビークルが存在し活用されている。IPC-B-52試験基板は実生産で用いられる材料と工程を具体的に表現したものであり、イオンクロマトグラフと表面絶縁抵抗(SIR)の両試験のニーズを満たすテストビークルである。IPC-9203Aに示す規格はIPC-B-52テストビークルに対応し、製造工程の評価や、選択した製造材料セットと工程が清浄度の観点から適合しているという客観的証拠を提供する場合に利用できる。またIPC-9203Aに示すユーザーガイドラインはIPC-9202の手引き文書として作成されており、製造者が材料と工程の適合性を実証する場合の規定「～することが望ましい」と「～すること(する必要がある)」という点について明確に提示している。

Document #:

IPC-9202

Revision

Product Type

Standard Only

Released: 09/22/2023

Language

Japanese

Current Revision

概説本書、IPC-9202A「材料・工程の特性評価/認定試験の方法」は、プリント回路組立品(PCA)の代表的なサンプル上の表面絶縁抵抗(SIR)の変化を記録するものである。この試験は、はんだ付後に外層に残るはんだ由来のフラックスまたはその他の工程残さが原因で不要な電気化学的反応を引き起こし、信頼性に重大な影響を及ぼす可能性について定量化するものである。この試験では、実際の生産工程において電子回路の代表的なものとなるような基板をテストビークルとして使用する。これは、定量的かつ定性的なデータの両方を得ることができる試験である。 IPC-9202Aに紹介する試験は、提案された製造工程や工程変更を用いた場合に、生産するハードウェア(製品)の最終的な性能が電気化学的リスクに対し許容可能であるということを示すための「工程認定」用として使用することができる。工程変更には組立工程の手順...