本書は、ソルダペーストの印刷および表面実装用接着剤の塗布に用いるステンシルについて、その設計と製造に関するガイダンスを提供するものである。内容の多くはステンシル設計者、製造者、およびユーザーの経験に基づくものである。
Your results
Document #
Language
Products
規格「IPC-CC-830C」は、電気絶縁化合物 (コンフォーマルコーティング) の認定および適合要件について確立するものである。これは、最小限の冗長テストで材料の最大の信頼性を得ることを目的として、設計および構築されてきたものである。規格「IPC-CC-830C」は次の項目を対象とする： フォーマルコーティング剤の認定および認定の維持 (表3-1、コラムAおよびB)。 コンフォーマルコーティング剤の特性に関する品質適合性 (表3-1、コラムC)。 本規格においてコンフォーマルコーティングという用語は、プリント配線板組立に使用される保護コーティングのタイプを指す場合に用いられる。コンフォーマルコーティングは単に機械的な支持をもたらすものではなく、湿気および汚染から基板を保護し、電気絶縁を付与することを目的としている。
IPC-7093A 标准为实施底部端子元器件(BTCs)提供了基本的设计和组装指南。具体而言，IPC-7093A 提供了与 BTCs 相关的关键设计、材料、组装、检查、维修、质量和可靠性问题的指南。
本标准规定了电气绝缘化合物（敷形涂覆材料）的鉴定和符合性要求，并设计和构建了充分且必要的测试项目来获取对材料性能的信心。本标准包括： 敷形涂覆材料的鉴定及鉴定效力保持（表3-1，A 列及B 列）。 敷形涂覆材料属性的质量符合性（表3-1，C 列）。 本标准中，敷形涂覆是指用于印制线路组件的保护涂层。敷形涂覆可起到防潮、防污物和电气绝缘的作用，但不是作为单独起机械保护作用的涂层。
本規格「IPC-7093A」は、下面電極部品(BTC)を実装するための基本的な設計および組立のガイダンスについて記述するものである。IPC-7093Aでは特にBTCに関連する重要な設計、材料、組立、検査、リペア、品質および信頼性の問題について、そのガイドラインを提供している
本指南描述了可用于评估柔性的、可拉伸的和可穿戴的应用中所采用的印刷电子器件的柔性和拉伸性能的测试。26页。2017年3月发布。2019年3月翻译.
本标准的目的是为开发温度曲线提供有效和实用的信息，以生产可接受的锡铅和无铅的电子组件。该修订版将原来标准的重点从再流温度曲线扩展到包括激光焊曲线、选择焊曲线、波峰焊曲线或其他焊接曲线。该修订版还包括一个全彩色故障排除指南，用于解决可归因于分析的常见缺陷。
描述 简要介绍 （英文） 更新了新技术，包括无铅、免清洗及环保化学品。 本文件集合了电路板及组件清洗信息。该修订版本主要阐述了制造和组装运营中材料、制程及污染物之间的关系。它还提出清洁度评估方案和涉及清洁度的制程控制方案。配有彩图帮助理解。全文共200页。2011年7月修订。2013年8月翻
Dieses Dokument unterstützt Richtlinien für das Design und die Herstellung von Druckschablonen für Lotpasten und Kleber für die Oberflächenmontage für THT- und THT/SMD-Technologie. Darin eingeschlossen sind die Unterschiede zwischen bleihaltigen und bleifreien Lotpasten, Überdruckung, Doppeldruck und Stufenschablonen Designs. Enthalten sind ebenfalls Beispiele für ein Bestellformular und die...
本标准是为设计与制造焊膏及表面贴装粘合剂用模板提供指导。本文件大部分内容是基于模板设计者、制造厂商和用户的经验编写的。
This guideline provides an overview of the design process flow for printed electronics based devices, modules and units, and final products.The intent of IPC/JPCA-2291 is to establish a design process flow that will facilitate and improve the practice of printed electronics design. IPC/JPCA-2291 identifies documents such as standards that can be used to assist during the design process flow. 24...
This document describes the design and assembly challenges for implementing passive and active components, in either formed or placed methodology, into a printed board. It provides useful and practical information to decision makers of formed or placed, passive or active components and helps establish inspection techniques, testing processes, and reliability validations. Users will also learn...
The IPC-7091 intends to provide useful and practical information to those who are designing, developing or using 3D-packaged semiconductor components or those who are considering 3D package implementation. The 3D semiconductor package may include multiple die elements—some homogeneous and some heterogeneous. The package may also include several discrete passive SMT devices, some of which are...
During mass soldering, it is important that all solder joints reach the minimum soldering (reflow) temperature to assure metallurgical bonding of the solder alloy and the base metals to be soldered. Metallurgical bonding requires that both surfaces to be soldered, as well as the solder, reach this minimum soldering temperature for a sufficient time to allow the wetting of the solder surfaces. This...
This document provides tests that record changes in surface insulation resistance (SIR) on a representative sample of a printed circuit assembly. It quantifies any deleterious effects that might arise from solder flux or other process residues left on external surfaces after soldering, which can cause unwanted electrochemical reactions that grossly affect reliability. It uses test vehicles that...
While there are a variety of industry test vehicles for the examination of materials compatibility, most available test boards leave something to be desired as there is often a dramatic difference in materials between such test boards and produced assemblies. A test vehicle was needed which could be used for both ion chromatography and SIR testing that would be more representative of mainstream...
IPC-2292 standard establishes specific requirements for the design of printed electronic applications and their forms of component mounting and interconnecting structures on flexible substrates. Flexible substrates, as pertaining to IPC-2292 standard, are materials or devices which have some amount of flexibility or bendability (not rigid) but are not considered to be stretchable (e.g., fabrics...
This document establishes the requirements and interactions necessary for printed board assembly processes for interconnecting high performance/high pin count IC packages. Includes information on design principles, material selection, board fabrication, assembly technology, testing strategy and reliability expectations based on end-use environments. Developed by IPC, EIA, MCNC and Sematech. 96...
Surface mount pad cratering typically initiates prior to detection by existing electrical monitoring test methods. There are limited instrumentation techniques that are currently available that can identify non-electrical damage and its location to a high degree of accuracy. This guideline document establishes an acoustic emission (AE) method to evaluate the performance and reliability of surface...
Implementing flip chip technology in a direct chip attach (DCA) assembly presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7094 delivers useful and practical information to anyone who is currently using or contemplating developing products that employ the very complex and high density methods needed for the flip chip technology. The concepts have become...
This standard describes the design and assembly challenges for implementing Bottom Termination surface mount Components (BTCs) whose external connections consist of metallized terminals that are an integral part of the component body. The BTCs in this document include all types and forms of bottom-only termination components intended for surface mounting. This includes such industry descriptive...
本文件是电子互连行业不可或缺的术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。M版本包含超过220多条新术语或修订术语，包括敷形涂覆、灌封和封装工艺、模板设计、统计工艺控制和挠性印制板技术。也包括通用行业缩写词。
Description in English 本文件是电子互连行业不可或缺的一份术语标准。该文件图文并茂，可帮助用户及其客户克服语言上的沟通障碍。H版本包含200多条新术语或修订术语，新术语涉及球栅阵列和芯片尺寸封装、导通孔保护、导体图形、组装工艺、基材和选择性电镀工艺等。还包括通用工业缩写词和根据技术分类排序的术语索引，以便于查找。全文276页，于 2008年7月公布。
本标准描述了在印制板中以成形或放置方式实现的有源和无源元器件在设计和组装方面的挑战。包括内部电子元器件的完整结构可用于表面贴装和／或通孔元器件连接。在组装过程中，多层结构变成准备为进一步加工的完整产品，它可由有机、无机（陶瓷）或两类兼有的材料制成。
El J-STD-075 continúa donde es J-STD-020 termina proporcionando los métodos de pruebas para clasificar las limitaciones de los procesos térmicos en los peores casos para los componentes electrónicos. Las clasificación hace referencia a los perfiles de soldadura para procesos industriales comunes de ola y de reflujo incluyendo procesos libres de plomo. La clasificación representa los máximos...
Coming Soon
IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)
IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)
IPC-2294: Design Standard for Printed Electronics on Rigid Substrates
IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates
IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards