Standard Only

Your results

Products

Document #:

IPC-8497

Revision

Original Version

Product Type

Standard Only

Released: 12/01/2005

Language

English

Current Revision

This standard describes the methods of inspecting and cleaning all optical interfaces so that interconnectivity integrity of the optical signal is maintained. The information provided focuses on techniques and methods to accomplish maximum quality of the interface and describes methods of contamination prevention. The target audience for this standard are Manufacturing Operators, Manufacturing...

Document #:

IPC-4811

Revision

Original Version

Product Type

Standard Only

Released: 05/30/2008

Language

English

Current Revision

This document describes materials that can be used for the fabrication of embedded passive resistor devices within the finished printed circuit board substrate. It provides information on general designations and associated characteristics of embedded passive device (EPD) resistor materials. The document shall be used as a qualification and conformance standard for designers and users when...

Document #:

IPC-4413

Revision

Original Version

Product Type

Standard Only

Released: 05/01/2024

Language

English

Current Revision

IPC-4413 standard covers finished fabrics woven from low Dk electrical grade glass fiber yarns that are intended as a reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by IPC-4413 standard are plain weave.

Document #:

IPC-8921

Revision

Original Version

Product Type

Standard Only

Released: 12/05/2019

Language

English

Current Revision

The IPC-8921 standard provides and defines industry test methods and guidance for providing performance data on key characteristics and durability of woven and knitted e-textiles integrated with conductive fibers, conductive yarns and/or wires. The IPC-8921 standard also provides classicfications for woven and knitted e-textiles, fibers, yarns and wires and includes 20 new terms and defintions for...

Document #:

IPC-D-279

Revision

Original Version

Product Type

Standard Only

Released: 07/01/1996

Language

English

Current Revision

Establishes design concepts, guidelines and procedures for reliable printed wiring assemblies. Focuses on SMT or mixed technology PWAs, specifically addressing the interconnect structure and the solder joint itself. Discusses substrates, components, attachment materials, coatings and assembly processes and testing considerations. In addition, this document contains detailed appendices covering...

Document #:

IPC-9641

Revision

Original Version

Product Type

Standard Only

Released: 07/10/2013

Language

English

Current Revision

Printed board flatness is largely affected by a change in intrinsic properties through exposure to variances in temperature. The worst case deviation of the printed board from flatness may be at room temperature, peak temperature during reflow, or at any temperature in between. Printed board flatness must therefore be characterized during the entire reflow thermal cycle, and not solely at room...

Document #:

ECA/IPC/JEDEC-J-STD-075

Revision

Original Version

Product Type

Standard Only

Released: 09/03/2008

Language

English

Current Revision

J-STD-075 picks up where J-STD-020 left off by providing test methods to classify worst-case thermal process limitations for electronic components. Classification is referenced to common industry wave and reflow solder profiles including lead-free processing. The classifications represent maximum process sensitivity levels and do not establish rework conditions or recommended processes for an...

Document #:

IPC-6013

Revision

Product Type

Standard Only

Released: 09/01/2017

Language

English

The IPC-6013D covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. IPC-6013D incorporates new and updated requirements for final finishes, rigid-to...

Document #:

IPC-4101

Revision

Product Type

Standard Only

Released: 05/12/2014

Language

English

This specification covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 64 individual specification sheets that can be searched using keywords. These keywords allow the document's user to find materials of a similar nature, but...

Document #:

IPC-6012

Revision

Product Type

Standard Only

Released: 09/22/2015

Language

English

This specification covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical...

Document #:

IPC-9194

Revision

Original Version

Product Type

Standard Only

Released: 09/01/2004

Language

English

Current Revision

This guideline standard is intended to aid in interpretation of the requirements in IPC-9191, "General Guidelines for Implementation of Statistical process Control," specifically for printed board assembly (PBA) manufacture. This document and IPC-9191 should be used together; the standards are cross-referenced to each other in the Appendices of this guideline. This standard promotes process...

Document #:

IPC-1753

Revision

Original Version

Product Type

Standard Only

Released: 01/31/2014

Language

English

Current Revision

IPC-1753 Laboratory Declaration Standard will allow for the electronic exchange of laboratory chemical analysis reports between supply chain members. Companies are being asked to provide laboratory analytic data to show compliance with the RoHS Directive and other customer requirements, such as halogen-free. This standard will allow for the expedited exchange of the necessary laboratory...

Document #:

IPC/JEDEC-9301

Revision

Original Version

Product Type

Standard Only

Released: 01/15/2019

Language

English

Current Revision

The IPC/JEDEC-9301document is an effort to standardize and document some of the basic tenets of a typical Finite Element Analysis (FEA) model, as well as, to educate new designers (and in some cases even experienced designers) on the basic information and best practices that should be captured and provided to technical reviewers of the results of FEA data.

Document #:

IPC-7621

Revision

Original Version

Product Type

Standard Only

Released: 02/14/2018

Language

English

Current Revision

Encapsulation, for the purpose of IPC-7621 standard, is defined as a low pressure molded thermoplastic, e.g., polyamide, which is brought to a liquid state and injection molded and (rather quickly) returned to a temperature below its melting point., forming a durable yet pliable (rubbery-like) form. The desired performance characteristics of low pressure molding (LPM) encapsulation depend on the...

Document #:

IPC-9199

Revision

Original Version

Product Type

Standard Only

Released: 09/01/2002

Language

English

Current Revision

This document is a tool for a customer or supplier organization's internal audit group to assess a statistical process control (SPC) system against the requirements of IPC-9191. This document should be used by customers and suppliers of any size and for any commodity. This tool can be used to perform an assessment of the use of SPC at both organizational and process levels. The questions in this...

Document #:

IPC-A-142

Revision

Original Version

Product Type

Standard Only

Released: 06/01/1990

Language

English

Current Revision

Covers finished fabrics woven from aramid yarns that are intended as reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by this specification are plain weave. 9 pages. Released June 1990.

Document #:

IPC/EIA-J-STD-032

Revision

Original Version

Product Type

Standard Only

Released: 06/01/2002

Language

English

Current Revision

This standard, developed jointly by IPC and the Electronic Industries Association (EIA) establishes the construction detail requirements for balls and other terminal structures on Ball Grid Array (BGA) packages. It also establishes a set of designations and expectations for product performance. A large variety of terminal structures are recognized for a wide range of applications ranging from...

Document #:

IPC-MS-810

Revision

Original Version

Product Type

Standard Only

Released: 10/01/1993

Language

English

Current Revision

Discusses the many variables and problems associated with the process--from sample removal to micro-etch-- and the variables common to high volume microsection. The process variables and problems are organized so that the reader can research a specific issue or overview the variables of a process area. 31 pages. Released October 1993.

Document #:

IPC-4121

Revision

Original Version

Product Type

Standard Only

Released: 01/01/2000

Language

English

Current Revision

IPC-4121 provides industry-approved guidelines for selecting core constructions for multilayer printed wiring boards (PWBs). The specification sheets in the document categorize the different core constructions by laminate type and nominal thickness. The constructions are rated for characteristics such as dielectric constant (DK), dimensional stability (DS), flatness, smoothness and drillability...

Document #:

IPC-4110

Revision

Original Version

Product Type

Standard Only

Released: 08/01/1998

Language

English

Current Revision

Determines the nomenclature, chemical and physical requirements of paper made from cellulose fibers for PWB fabrication. IPC-4110 also includes specification sheets for selecting and purchasing these materials. 11 pages. Released August 1998.

Document #:

IPC-QF-143

Revision

Original Version

Product Type

Standard Only

Released: 02/01/1992

Language

English

Current Revision

Covers classification and requirements for finished fabrics woven from quartz fiber yarns that are intended as a reinforcing material in laminated plastics for electrical and electronic use. 13 pages. Released February 1992.

Document #:

IPC-9241

Revision

Original Version

Product Type

Standard Only

Released: 01/13/2017

Language

English

Current Revision

This standard is intended as a guideline in the proper preparation of a metallographic sample (microsection) of a printed board. The finished microsection is used for evaluating the quality of the laminate system and plated structures (e.g. PTHs and vias). Microsection sample preparation is regarded by many as a highly developed skill. The guidelines in this standard discuss the many variables and...

Document #:

IPC-SG-141

Revision

Original Version

Product Type

Standard Only

Released: 02/01/1992

Language

English

Current Revision

Covers the classification and requirements for finished fabrics woven from "S" glass, electrical grade glass fiber yarns intended as a reinforcing material in laminated plastics for electrical and electronic use. 12 pages. Released February 1992.

Document #:

IPC-MC-790

Revision

Original Version

Product Type

Standard Only

Released: 07/01/1992

Language

English

Current Revision

Provides information on multichip module technology, including parametric data, design and manufacturing information and a proposed categorization of various approaches to multichip interconnect substrate technologies based on dielectric family. 120 pages. Released August 1992.