Standard Only

Your results

Products

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 10/19/2022

Language

English

Current Revision

IPC/WHMA-A-620E is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620E describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620E was developed by IPC and...

Document #:

IPC-SM-840

Revision

Product Type

Standard Only

Released: 12/22/2010

Language

English

Current Revision

Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reﬂect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

Document #:

IPC-CH-65

Revision

Product Type

Standard Only

Released: 07/25/2011

Language

English

Current Revision

This document includes lead free, no-clean, and environmental friendly chemistries. This is a collection of information on electronic board and assembly cleaning in a single location. This major revision explains the relationship between materials, processes, and contaminants in fabrication and assembly operations. It also addresses cleanliness assessment and process control in relation to...

Document #:

IPC-CC-830

Revision

Product Type

Standard Only

Released: 01/15/2019

Language

English

Current Revision

The IPC-CC-830C standard establishes qualification and conformance requirements for electrical insulating compounds (conformal coatings). It has been designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy. The IPC-CC-830C standard covers: • The qualification and qualification retention of the conformal coating material (Table 3-1...

Document #:

IPC-SM-817

Revision

Product Type

Standard Only

Released: 12/23/2014

Language

English

Current Revision

Provides requirements for dielectric adhesives to hold components in place from the mounting to the soldering process and identifies test methods to ensure their long term properties. 9 pages. Released December 2014.

Document #:

IPC-9204

Revision

Product Type

Standard Only

Released: 05/05/2017

Language

English

Current Revision

This guideline describes flexibility and stretchability testing to evaluate printable electronics for stretchable and wearable applications. 26 pages. Released March 2017

Document #:

IPC-4591

Revision

Product Type

Standard Only

Released: 01/01/2018

Language

English

Current Revision

The IPC-4591A standard establishes the classification system and the qualification and quality conformance requirements for functional conductive materials used in printed electronics applications. It provides companies that procure functional materials for printed electronics with the necessary technical structure to design and manufacture products meeting conformance to industry-determined...

Document #:

IPC-4921

Revision

Product Type

Standard Only

Released: 06/27/2017

Language

English

Current Revision

This standard provides and defines key characteristics and test methods for procuring printed electronics substrates. Includes six materials specification sheets.

Document #:

IPC-6903

Revision

Product Type

Standard Only

Released: 01/01/2018

Language

English

Current Revision

The IPC-6903A standard provides 62 additional terms and definitions for the design and manufacture of printed electronics. The IPC-6903A standard creates a common language and understanding for the worldwide printed electronics community.

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 01/21/2020

Language

English

IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...

Document #:

IPC-TM-650

Revision

Original Version

Product Type

Standard Only

Language

English

Current Revision

Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.

Document #:

IPC/WHMA-A-620

Revision

Original Version

Product Type

Standard Only

Released: 01/01/2012

Language

English

Current Revision

These tables are from IPC/WHMA-A-620 Revision B Chapter 19 Testing. They are provided in an electronic format that permits users to edit the tables to add user-specific criteria. These files are authorized for copying/reproduction.

Document #:

IPC-8921

Revision

Original Version

Product Type

Standard Only

Released: 12/05/2019

Language

English

Current Revision

The IPC-8921 standard provides and defines industry test methods and guidance for providing performance data on key characteristics and durability of woven and knitted e-textiles integrated with conductive fibers, conductive yarns and/or wires. The IPC-8921 standard also provides classicfications for woven and knitted e-textiles, fibers, yarns and wires and includes 20 new terms and defintions for...

Document #:

IPC-SM-840

Revision

Product Type

Standard Only

Released: 04/30/2007

Language

English

Document #:

IPC-6903

Revision

Product Type

Standard Only

Released: 10/29/2015

Language

English

This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 10/02/2017

Language

English

This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 10/30/2012

Language

English

Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 09/10/2020

Language

Dutch

Current Revision

IPC/WHMA-A-620D is de enige consensusstandaard in de branche voor eisen en acceptatie van kabel- en kabelboomassemblages. IPC/WHMA-A-620D beschrijft materialen, methoden, tests en acceptatiecriteria voor het produceren van krimp-, mechanisch beveiligde en gesoldeerde verbindingen en de bijbehorende assemblageactiviteiten in verband met kabels en kabelbomen. IPC/WHMA-A-620D is ontwikkeld door IPC...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 06/17/2020

Language

French

Current Revision

IPC/WHMA-A-620D est la seule norme consensuelle de l’industrie pour les exigences et l’acceptation des assemblages de câbles et de faisceaux de fils. IPC/WHMA-A-620D décrit les matériaux, les méthodes, les tests et les critères d’acceptation pour la production d’ensembles interconnectés brasés, sertis et mécaniquement sécurisés, ainsi que les activités d’assemblage qui y sont associées pour...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 06/17/2020

Language

Spanish

Current Revision

El IPC/WHMA-A-620D es el único estándar consensuado por el sector sobre Requisitos y aceptabilidad de ensambles de cables y mazos de cables. El estándar IPC/WHMA-A-620D describe los materiales, métodos, pruebas y criterios de aceptabilidad para la producción de interconexiones crimpadas, mecánicamente aseguradas o soldadas y las actividades de ensamble relacionadas que estén asociadas con...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 11/20/2020

Language

Danish

Current Revision

IPC/WHMA-A-620D er den eneste industriudviklede standard for ” Godkendelseskrav for kabler og for produkter med wire harness”. IPC/WHMA-A-620D beskriver materialer, metoder, test og godkendelseskriterier for fremstilling af crimpede samlinger, mekanisk sikrede og loddede forbindelser samt de tilhørende monteringsprocesser som er forbundet med kabel og harness produkter. IPC/WHMA-A-620D blev...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 07/13/2023

Language

Japanese

Current Revision

IPC/WHMA-A-620Eは、ケーブルおよびワイヤーハーネス組立品の要求事項および許容基準に関する、唯一の業界合意文書(規格書)である。IPC/WHMA-A-620Eでは、ケーブルおよびハーネス組立品に関係する配線の圧着、機械的固定、またははんだ付を行うための材料、方法、試験、および許容基準、ならびに関連組立活動について説明している。 IPC/WHMA-A-620Eは、IPCおよびThe Wire Harness Manufacturers Association (WHMA) (IPCの関連団体)により作成されたものである。

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 07/27/2021

Language

Korean

Current Revision

IPC/WHMA-A-620D는 케이블 및 와이어 하네스 어셈블리의 요건과 및 허용 가능성에 대해 업계에서 유일하게 합의된 표준입니다. IPC/WHMA-A-620D는 크림핑된 기계적으로 고정되고 솔더링된 상호연결의 생산을 위한 물질, 방법, 테스트 및 허용 기준과 케이블 및 하네스 어셈블리와 관련된 조립 활동을 설명한다. IPC/WHMA-A-620D는 IPC와 WHMA(Wire Hanage Manufacturers Association)에 의해 개발되었다.

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 06/17/2020

Language

German

Current Revision

IPC/WHMA-A-620D ist die einzige, im Branchenkonsens entwickelte Richtlinie für Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen. IPC/WHMA-A-620D beschreibt Materialien, Methoden, Tests und Abnahmekriterien für die Herstellung gecrimpter, mechanisch gesicherter oder gelöteter Verbindungen und die zu den Kabel- und Kabelbaum-Baugruppen zugehörigen Montageaktivitäten. IPC/WHMA-A...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 06/17/2020

Language

Chinese

Current Revision

IPC/WHMA-A-620D 是线缆及线束组件的要求与验收的唯一行业共识标准。本标准描述了用于压接、机械紧固或焊接互连的材料、方法、测试和可接受性标准以及其他线缆线束组件组装活动的相关标准。 IPC / WHMA-A-620D由IPC和线束制造商协会（WHMA）（隶属于IPC）共同开发。全文共420页。2020年1月开发。2020年5月翻译。