Standard Only

Your results

Products

Document #:

IPC-6013

Revision

Product Type

Standard Only

Released: 09/01/2017

Language

English

The IPC-6013D covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. IPC-6013D incorporates new and updated requirements for final finishes, rigid-to...

Document #:

IPC-6012

Revision

Product Type

Standard Only

Released: 09/22/2015

Language

English

This specification covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical...

Document #:

IPC/JEDEC-9301

Revision

Original Version

Product Type

Standard Only

Released: 01/15/2019

Language

English

Current Revision

The IPC/JEDEC-9301document is an effort to standardize and document some of the basic tenets of a typical Finite Element Analysis (FEA) model, as well as, to educate new designers (and in some cases even experienced designers) on the basic information and best practices that should be captured and provided to technical reviewers of the results of FEA data.

Document #:

IPC-MS-810

Revision

Original Version

Product Type

Standard Only

Released: 10/01/1993

Language

English

Current Revision

Discusses the many variables and problems associated with the process--from sample removal to micro-etch-- and the variables common to high volume microsection. The process variables and problems are organized so that the reader can research a specific issue or overview the variables of a process area. 31 pages. Released October 1993.

Document #:

IPC-9241

Revision

Original Version

Product Type

Standard Only

Released: 01/13/2017

Language

English

Current Revision

This standard is intended as a guideline in the proper preparation of a metallographic sample (microsection) of a printed board. The finished microsection is used for evaluating the quality of the laminate system and plated structures (e.g. PTHs and vias). Microsection sample preparation is regarded by many as a highly developed skill. The guidelines in this standard discuss the many variables and...

Document #:

IPC-MC-790

Revision

Original Version

Product Type

Standard Only

Released: 07/01/1992

Language

English

Current Revision

Provides information on multichip module technology, including parametric data, design and manufacturing information and a proposed categorization of various approaches to multichip interconnect substrate technologies based on dielectric family. 120 pages. Released August 1992.

Document #:

IPC-9631

Revision

Original Version

Product Type

Standard Only

Released: 12/15/2010

Language

English

Current Revision

IPC-9631 addresses concerns and considerations related to IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation. This document describes how the test method is intended for use and the rationale behind some of the protocols and requirements. This document was developed with the understanding that the test method will require special equipment and the proper set-up and...

Document #:

IPC-9708

Revision

Original Version

Product Type

Standard Only

Released: 12/14/2010

Language

English

Current Revision

Mechanical bend and shock tests are routinely performed on SMT assemblies to ensure that they can sustain anticipated production, handling and end use conditions. The strains and strain rates applied to SMT assemblies during bend and shock testing can lead to a variety of failure modes in the vicinity of the solder joints. This document provides test methods to evaluate the susceptibility of...

Document #:

IPC-CI-408

Revision

Original Version

Product Type

Standard Only

Released: 01/01/1994

Language

English

Current Revision

Provides information on design characteristics and the application of solderless surface mount connectors, including conductive adhesives to aid IC package and board interconnection. 34 pages. Released January 1994.

Document #:

IPC-SM-840

Revision

Product Type

Standard Only

Released: 04/30/2007

Language

English

Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reﬂect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

Document #:

IPC-5703

Revision

Original Version

Product Type

Standard Only

Released: 05/17/2013

Language

English

Current Revision

Printed board cleanliness has historically been an unknown factor in the quality assessment of unpopulated (bare) printed boards; this has often been attributed to a lack of understanding of materials and processes. This document addresses the various printed board fabrication processes and how each may impact, directly or indirectly, the final cleanliness of packaged bare printed boards and...

Document #:

IPC-9706

Revision

Original Version

Product Type

Standard Only

Released: 01/14/2014

Language

English

Current Revision

Survey-based study presents data and analysis on the EMS industry, examining trends in sources of revenue, revenue per employee, services offered, markets served, manufacturing technology, capital investment, spending on equipment and materials and market size including forecasts and potential for market expansion. This study is based on data provided by a representative sample of 120 EMS...

Document #:

IPC-5702

Revision

Original Version

Product Type

Standard Only

Released: 06/01/2007

Language

English

Current Revision

Every electronics manufacturer, whether an original equipment manufacturer (OEM) or electronics manufacturing services (EMS) company, must determine if the unpopulated printed boards entering the assembly process have an adequate level of cleanliness. The question of “how clean is clean enough?” is one that has no definitive answer, as there is no "golden number" for board cleanliness. The issue...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 10/02/2017

Language

English

This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...

Document #:

IPC/JEDEC-J-STD-033

Revision

Product Type

Standard Only

Released: 08/01/2014

Language

English

Provides surface mount device manufacturers and users with standardized methods for handling, packing, shipping and use of moisture/reflow sensitive components. These methods help avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation and damaged components. These procedures provide a minimum shelf life of 12 months...

Document #:

IPC-9701

Revision

Product Type

Standard Only

Released: 02/01/2006

Language

English

Provides specific test methods to evaluate the performance and reliability of surface mount solder attachments of electronic assemblies. Establishes levels of performance and reliability of the solder attachments of surface mount devices to rigid, flexible and rigid-flex circuit structures. When used with IPC-SM-785, it provides an understanding of the physics of SMT solder joint failure and an...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 06/30/2015

Language

French

Current Revision

Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...

Document #:

IPC/JEDEC-J-STD-609

Revision

Product Type

Standard Only

Released: 06/01/2012

Language

English

This is a list of reported errata to the printed copies of IPC/JEDEC J-STD-609A. Pen and ink changes should be made in accordance with your company's document control policies.

Document #:

IPC-7095

Revision

Product Type

Standard Only

Released: 04/02/2008

Language

English

Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095B delivers useful and practical information to anyone currently using BGAs or considering a conversion to area array packaging formats. This has become especially important due to the change in the alloys being used, both...

Document #:

IPC-7095

Revision

Product Type

Standard Only

Released: 10/01/2004

Language

English

Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. Revision A of this document delivers useful and practical information to anyone who is currently using BGAs or is considering a conversion to area array packaging formats. In addition to providing guidelines for BGA inspection...

Document #:

IPC-6012

Revision

Product Type

Standard Only

Released: 04/13/2010

Language

English

Dual-language (Spanish/English) DVD -- Introduces industry specifications J-STD-001 & IPC-A-610 and explains the concept of process indicators. Includes an animated examination of the invisible problems that can be created during rework to explain why it's so important to avoid unnecessary rework. Reviews each of the tools and materials for plated-through hole (PTH) rework (including low-residue...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 01/13/2023

Language

Chinese

Current Revision

IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 02/03/2015

Language

German

Current Revision

Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...

Document #:

IPC-6018

Revision

Product Type

Standard Only

Released: 08/09/2016

Language

English

This specification covers qualification and performance of high frequency (microwave) boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as...

Document #:

IPC-6013

Revision

Product Type

Standard Only

Released: 12/18/2013

Language

English

Covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. Revision C incorporates new and updated requirements for final finishes, surface and hole plating...