Standards

Your results

Products

Document #:

JIG-101

Revision

Product Type

Standard Only

Released: 09/08/2011

Language

English

Current Revision

The Joint Industry Guide Material Composition Declaration for Electrotechnical Products has been updated to include the most recent substances for restriction. The JIG-101 is an industry materials declaration guide that facilitates reporting of material content information across the global electrotechnical supply chain. This document sets minimum requirements for a materials declaration. The...

Document #:

IPC-9191

Revision

Original Version

Product Type

Standard Only

Released: 11/01/1999

Language

English

Current Revision

IPC-9191 reflects the principals of statistical process control (SPC) represented by ISO/DIS 11462-1, Guidelines for Implementation of Statistical Process Control (SPC) -- Part 1: Elements of SPC. This document outlines the SPC philosophy, implementation strategies, tools, and techniques used for relating process control and capability to final product requirements. Supersedes IPC-PC-90.

Document #:

IPC-4781

Revision

Original Version

Product Type

Standard Only

Released: 05/30/2008

Language

English

Current Revision

The industry's first specification for the evaluation of a legend and/or marking ink material for the determination of acceptability of use in a standard printed board system. IPC-4781 provides coverage for adhesion, material qualification and testing, resistances to solvents, requirements for resistance to lead-free solders, and electrical requirements. 17 pages. Released May 2008.

Document #:

IPC-4811

Revision

Original Version

Product Type

Standard Only

Released: 05/30/2008

Language

English

Current Revision

This document describes materials that can be used for the fabrication of embedded passive resistor devices within the finished printed circuit board substrate. It provides information on general designations and associated characteristics of embedded passive device (EPD) resistor materials. The document shall be used as a qualification and conformance standard for designers and users when...

Document #:

IPC-4413

Revision

Original Version

Product Type

Standard Only

Released: 05/01/2024

Language

English

Current Revision

IPC-4413 standard covers finished fabrics woven from low Dk electrical grade glass fiber yarns that are intended as a reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by IPC-4413 standard are plain weave.

Document #:

IPC-9194

Revision

Original Version

Product Type

Standard Only

Released: 09/01/2004

Language

English

Current Revision

This guideline standard is intended to aid in interpretation of the requirements in IPC-9191, "General Guidelines for Implementation of Statistical process Control," specifically for printed board assembly (PBA) manufacture. This document and IPC-9191 should be used together; the standards are cross-referenced to each other in the Appendices of this guideline. This standard promotes process...

Document #:

IPC-9199

Revision

Original Version

Product Type

Standard Only

Released: 09/01/2002

Language

English

Current Revision

This document is a tool for a customer or supplier organization's internal audit group to assess a statistical process control (SPC) system against the requirements of IPC-9191. This document should be used by customers and suppliers of any size and for any commodity. This tool can be used to perform an assessment of the use of SPC at both organizational and process levels. The questions in this...

Document #:

IPC-A-142

Revision

Original Version

Product Type

Standard Only

Released: 06/01/1990

Language

English

Current Revision

Covers finished fabrics woven from aramid yarns that are intended as reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by this specification are plain weave. 9 pages. Released June 1990.

Document #:

IPC/EIA-J-STD-032

Revision

Original Version

Product Type

Standard Only

Released: 06/01/2002

Language

English

Current Revision

This standard, developed jointly by IPC and the Electronic Industries Association (EIA) establishes the construction detail requirements for balls and other terminal structures on Ball Grid Array (BGA) packages. It also establishes a set of designations and expectations for product performance. A large variety of terminal structures are recognized for a wide range of applications ranging from...

Document #:

IPC-4121

Revision

Original Version

Product Type

Standard Only

Released: 01/01/2000

Language

English

Current Revision

IPC-4121 provides industry-approved guidelines for selecting core constructions for multilayer printed wiring boards (PWBs). The specification sheets in the document categorize the different core constructions by laminate type and nominal thickness. The constructions are rated for characteristics such as dielectric constant (DK), dimensional stability (DS), flatness, smoothness and drillability...

Document #:

IPC-QF-143

Revision

Original Version

Product Type

Standard Only

Released: 02/01/1992

Language

English

Current Revision

Covers classification and requirements for finished fabrics woven from quartz fiber yarns that are intended as a reinforcing material in laminated plastics for electrical and electronic use. 13 pages. Released February 1992.

Document #:

IPC-4110

Revision

Original Version

Product Type

Standard Only

Released: 08/01/1998

Language

English

Current Revision

Determines the nomenclature, chemical and physical requirements of paper made from cellulose fibers for PWB fabrication. IPC-4110 also includes specification sheets for selecting and purchasing these materials. 11 pages. Released August 1998.

Document #:

IPC-SG-141

Revision

Original Version

Product Type

Standard Only

Released: 02/01/1992

Language

English

Current Revision

Covers the classification and requirements for finished fabrics woven from "S" glass, electrical grade glass fiber yarns intended as a reinforcing material in laminated plastics for electrical and electronic use. 12 pages. Released February 1992.

Document #:

IPC-4563

Revision

Original Version

Product Type

Standard Only

Released: 02/11/2008

Language

English

Current Revision

This guideline covers the requirements for resin coated copper foil intended for use in the formation of high density interconnect surface microvias for printed boards and printed board assemblies. 19 pages. Released November 2007.

Document #:

IPC-1731

Revision

Original Version

Product Type

Standard Only

Released: 06/01/2000

Language

English

Current Revision

Suppliers of raw materials for laminate manufacturing now have an industry-approved questionnaire to supply current and potential customers with a self-assessment of their facilities. IPC-1731 gives suppliers of raw materials the opportunity to create a profile of their manufacturing facility(s) that will be consistent with those developed by other industry suppliers. Using the Microsoft Word (TM)...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 06/30/2015

Language

French

Current Revision

Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 01/13/2023

Language

Chinese

Current Revision

IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 02/03/2015

Language

German

Current Revision

Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...

Document #:

IPC-4821

Revision

Original Version

Product Type

Amendment

Released: 05/01/2006

Language

English

Current Revision

IPC-4821 Amendment 1 provides the update of IPC-CF-148 to the correct IPC-4563, references the IPC-TM-650, Method 2.5.7.2 for correct Hi-Pot testing of these thin materials, uses proper reference for visual inspection by inspectors and finally, updated the first five material specification sheets (IPC-4821/1 through IPC-4821/5) that now show Effective Dates of April 2010. The Specification Sheet...

Document #:

IPC-7095

Revision

Product Type

Standard with amendment(s)

Released: 09/19/2019

Language

Chinese

Current Revision

IPC-7095D在设计，组装，检查和维修过程中实施球栅阵列（BGA）和细节距球栅阵列（FBGA）技术提出了了一些独特的挑战。它为使用或正在考虑使用BGA的用户提供有用和实用的信息。它还介绍了如何使用BGA成功实现印刷电路板组件的稳健设计和装配流程，以及解决BGA组装过程中可能出现的一些常见异常的方法。由于焊球中合金，焊球形状，封装程序等的改变，许多问题变得尤为重要。D版主要重点是为组装后出现的一些新的机械失效问题如坑裂或层压缺陷提供信息。除了提供BGA检查和维修的指引外，本标准还解决了与BGA相关的可靠性问题和无铅焊点的使用标准。该标准中有许多X射线和内窥镜的照片和插图以确认行业中BGA组装工艺的实施中的遇到的一些情况。

Document #:

IPC-4101

Revision

Product Type

Standard Only

Released: 11/16/2018

Language

Chinese

Current Revision

IPC-4101E涵盖了被称为层压板或粘结片的基材的要求，并列在主体最后一部分的规格单中。这些要求主要用于电子互连的刚性和多层印刷电路板中。本文档包含了65个单独的规格单，可以使用关键字搜索。这些关键字允许本文档的用户查找类似性质的材料，但具有特定的不同特性，可以对其层压板和/或粘结片选择需求进行微调。修订版E增加了附录A，提供补充检查要求，但仅在材料用户的采购订单或主图纸有要求时使用。全文共152页。于2017年3月发布。2018年10月翻译。

Document #:

IPC-7095

Revision

Product Type

Standard with amendment(s)

Released: 06/17/2020

Language

Japanese

Current Revision

IPC-7095D-AM1は、ボールグリッドアレイ(BGA)およびファインピッチBGA(FBGA)技術の設計および組立の実施について記述するものであり、これらのパッケージを使用したプリント基板の設計と組立に関連する検査、リペアおよび信頼性の問題に焦点を当てている。 IPC-7095D-AM1は、BGAを使用している、もしくは使用を検討している本書読者に対し、有用で実用的な情報を提供するものである。またIPC-7095D-AM1では、BGAを使用するプリント基板組立のためのロバスト設計と組立プロセスの正しい方法について説明するとともに、BGAの組立中に発生する可能性のある一般的な異常について、トラブルシューティングの方法を説明している。

Document #:

IPC-SM-840

Revision

Product Type

Standard Only

Released: 11/20/2012

Language

Chinese

Current Revision

简要介绍（英文）建立了液态和干膜阻焊材料的评估要求，以及确定其用在一个标准的印制板系统上的可接受性要求。IPC-SM-840提供了两个等级的要求，T级和H级，以反映基于行业/最终用户要求对功能性的要求及测试严格程度的差别。覆盖了附着力、材料鉴定、耐溶剂、以及电气要求。E版本包含了挠性覆盖材料的要求，在已蚀刻的导体和其他导电图形上提供挠性的介质保护层。共19页。2010年12月发布。2012年10月翻

Document #:

IPC-1601

Revision

Product Type

Standard Only

Released: 04/12/2019

Language

Chinese

Current Revision

描述关于印制板操作、包装和储存的行业指南。这些指南是为了保护印制板，避免其受到污染、物理损坏、可焊性降低、静电放电（必要时）和吸湿。本文件考虑了包装材料和方法、生产环境、操作和产品运输，建立了除湿烘烤曲线。修订本A扩大了覆盖范围，包括防潮袋（MBB）、烘烤对印刷板可焊性的影响、ESD问题、蚀刻芯和复合材料的湿度问题、干燥剂材料和HIC卡以及包装和处理要求的示例流程。2017年8月翻译。

Document #:

IPC-1601

Revision

Product Type

Standard Only

Released: 10/17/2022

Language

Japanese

Current Revision

概説本書はプリント基板の取扱い、梱包、保管に関する、業界唯一のガイドラインである。このガイドラインはプリント基板を汚染、物理的損傷、はんだ付性の低下、吸湿から保護することを目的としている。梱包材の種類と方法、製造環境、製品の取扱いと輸送、水分除去のためのベーキングプロファイルの確立などについて懸念事項が示されている。本書(A版)では、防湿袋(MBB)、プリント基板をベーキングすることによるはんだ付性への影響、ESDの問題、エッチング後のコア材・サブコンポジットの湿気に関する懸念事項、乾燥剤とHICカード、梱包/取扱いに関する要求事項のフローダウンの事例についてより詳しく解説している。翻訳年： 2022年7月。