Menu
Close
Contact IPC

Standards

Your results

Document #

Language

Products

IPC-6012 - Revision E - Addendum - Medical

Medical Applications Addendum to IPC-6012E Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  09/10/2020
Language
English
Current Revision
The IPC-6012EM Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012E, for rigid printed boards that must meet requirements to high reliability medical device applications. IPC-6012EM is the only global industry-consensus standard for Medical Applications to Qualification and Performance Specifications for Rigid...
no-image-available

IPC-6013 - Revision E - Addendum - Medical

Medical Applications Addendum to IPC-6013E Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
E
Product Type
Addendum
Released:  04/12/2022
Language
English
Current Revision
The IPC-6013EM Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6013E, for flexible/rigid-flexible printed boards that must meet requirements to high reliability medical device applications. IPC-6013EM is the only global industry-consensus standard addendum for Medical Applications to Qualification and Performance...
no-image-available

IPC-TM-650 - Standard Only

Test Methods Manual

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Standard Only
Language
English
Current Revision
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
no-image-available

IPC/EIA-J-STD-028 - Standard Only

Performance Standard for Construction of Flip Chip and Chip Scale Bumps

Document #:
IPC/EIA-J-STD-028
Revision
Original Version
Product Type
Standard Only
Released:  08/01/1999
Language
English
Current Revision
This standard establishes construction detail requirements for bumps and other terminal structures used for Flip Chip Scale carriers. The specific standards for different terminations are appropriately matched to a particular interconnection process and include such diverse terminations as solder bumps, columns, non-melting stand-offs and conductive polymer deposits. The document articulates a set...

IPC-CA-821 - Standard Only

General Requirements for Thermally Conductive Adhesives

Document #:
IPC-CA-821
Revision
Original Version
Product Type
Standard Only
Released:  01/01/1995
Language
English
Current Revision
Covers requirements and test methods for thermally conductive dielectric adhesives used to bond components in place. Permanent, removable and self-shimming adhesives are addressed. 18 pages. Released January 1995.

IPC-6015 - Standard Only

Qualification & Performance Specification for Organic Multichip Module (MCM-L) Mounting & Interconnecting Structures

Document #:
IPC-6015
Revision
Original Version
Product Type
Standard Only
Released:  02/01/1998
Language
English
Current Revision
Establishes the specific requirements for organic mounting structures used to interconnect chip components, which in combination form the completed functional organic single-chip module (SCM-L) or organic multichip module (MCM-L) assembly. Includes the quality and reliability assurance requirements that must be met for their acquisition. For use with IPC-6011. 25 pages. Released February 1998.

IPC-5704 - Standard Only

Cleanliness Requirements for Unpopulated Printed Boards

Document #:
IPC-5704
Revision
Original Version
Product Type
Standard Only
Released:  01/27/2010
Language
English
Current Revision
Printed board quality encompasses many parameters, cleanliness being one important parameter. This document defines the recommended general requirements for the cleanliness of unpopulated (bare) single, double-sided and multilayer printed boards. Coverage is given to Ion Chromatography (IC) testing and Ionic cleanliness testing for process control. 6 pages. Released December 2009.

IPC-D-279 - Standard Only

Design Guidelines for Reliable Surface Mount Technology Printed Board Assemblies

Document #:
IPC-D-279
Revision
Original Version
Product Type
Standard Only
Released:  07/01/1996
Language
English
Current Revision
Establishes design concepts, guidelines and procedures for reliable printed wiring assemblies. Focuses on SMT or mixed technology PWAs, specifically addressing the interconnect structure and the solder joint itself. Discusses substrates, components, attachment materials, coatings and assembly processes and testing considerations. In addition, this document contains detailed appendices covering...
no-image-available

IPC-OI-645 - Standard Only

Standard for Visual Optical Inspection Aids

Document #:
IPC-OI-645
Revision
Original Version
Product Type
Standard Only
Released:  10/01/1993
Language
English
Current Revision
Establishes requirements, definitions and certification provisions for optical inspection aids. Defines inspection grades to be used as accept/reject criteria for optical inspection aids. 40 pages. Released October 1993.

IPC-9641 - Standard Only

High Temperature Printed Board Flatness Guideline

Document #:
IPC-9641
Revision
Original Version
Product Type
Standard Only
Released:  07/10/2013
Language
English
Current Revision
Printed board flatness is largely affected by a change in intrinsic properties through exposure to variances in temperature. The worst case deviation of the printed board from flatness may be at room temperature, peak temperature during reflow, or at any temperature in between. Printed board flatness must therefore be characterized during the entire reflow thermal cycle, and not solely at room...
no-image-available

IPC-MS-810 - Standard Only

Guidelines for High Volume Microsection

Document #:
IPC-MS-810
Revision
Original Version
Product Type
Standard Only
Released:  10/01/1993
Language
English
Current Revision
Discusses the many variables and problems associated with the process--from sample removal to micro-etch-- and the variables common to high volume microsection. The process variables and problems are organized so that the reader can research a specific issue or overview the variables of a process area. 31 pages. Released October 1993.

IPC-9241 - Standard Only

Guidelines for Microsection Preparation

Document #:
IPC-9241
Revision
Original Version
Product Type
Standard Only
Released:  01/13/2017
Language
English
Current Revision
This standard is intended as a guideline in the proper preparation of a metallographic sample (microsection) of a printed board. The finished microsection is used for evaluating the quality of the laminate system and plated structures (e.g. PTHs and vias). Microsection sample preparation is regarded by many as a highly developed skill. The guidelines in this standard discuss the many variables and...
no-image-available

IPC-MC-790 - Standard Only

Guidelines for Multichip Module Technology Utilization

Document #:
IPC-MC-790
Revision
Original Version
Product Type
Standard Only
Released:  07/01/1992
Language
English
Current Revision
Provides information on multichip module technology, including parametric data, design and manufacturing information and a proposed categorization of various approaches to multichip interconnect substrate technologies based on dielectric family. 120 pages. Released August 1992.

IPC-9631 - Standard Only

User Guide for IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation

Document #:
IPC-9631
Revision
Original Version
Product Type
Standard Only
Released:  12/15/2010
Language
English
Current Revision
IPC-9631 addresses concerns and considerations related to IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation. This document describes how the test method is intended for use and the rationale behind some of the protocols and requirements. This document was developed with the understanding that the test method will require special equipment and the proper set-up and...

IPC-5703 - Standard Only

Cleanliness Guidelines for Printed Board Fabricators

Document #:
IPC-5703
Revision
Original Version
Product Type
Standard Only
Released:  05/17/2013
Language
English
Current Revision
Printed board cleanliness has historically been an unknown factor in the quality assessment of unpopulated (bare) printed boards; this has often been attributed to a lack of understanding of materials and processes. This document addresses the various printed board fabrication processes and how each may impact, directly or indirectly, the final cleanliness of packaged bare printed boards and...

IPC-5702 - Standard Only

Guidelines for OEMs in Determining Acceptable Levels of Cleanliness of Unpopulated Printed Boards

Document #:
IPC-5702
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2007
Language
English
Current Revision
Every electronics manufacturer, whether an original equipment manufacturer (OEM) or electronics manufacturing services (EMS) company, must determine if the unpopulated printed boards entering the assembly process have an adequate level of cleanliness. The question of “how clean is clean enough?” is one that has no definitive answer, as there is no "golden number" for board cleanliness. The issue...

IPC-T-50 - Revision M - Standard Only

Termes et Définitions pour les Circuits Électroniques Imprimés et Assemblés

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  06/30/2015
Language
French
Current Revision
Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...
no-image-available

IPC-T-50 - Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

IPC-T-50 - Revision K - Standard Only

Begriffe und Definitionen für Leiterplatten und elektronische Baugruppen

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  02/03/2015
Language
German
Current Revision
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
no-image-available

IPC-9707 - Amendment 1

Spherical Bend Test Method for Characterization of Board Level Interconnects

Document #:
IPC/JEDEC-9707
Revision
Original Version
Product Type
Amendment
Released:  05/01/2018
Language
English
Current Revision
IPC/JEDEC-9707-AM1 is an amendment which clarifies that the standard is only applicable to transient bending during short-term test operations. The standard specifies a common method of establishing strain limits of board-level device interconnects under spherical transient bending conditions, the worst-case flexure condition that can occur during conventional printed board/system assembly...
no-image-available

IPC-6012 - Revision F - Standard Only

刚性印制板的鉴定及性能规范

Document #:
IPC-6012
Revision
F
Product Type
Standard Only
Released:  04/01/2024
Language
Chinese
Current Revision
此标准涵盖了刚性印制板的鉴定和性能要求，印制板类型包括单/双面板、带或不带镀覆孔、带或不带盲孔/埋孔和金属芯的多层板。该规范涉及最终产品和表面处理涂敷要求、导体、通孔/过孔、验收测试频次和质量一致性以及电气、机械和环境要求。IPC-6012F新增和修订了一些印制板的要求，例如背钻孔结构，选择性表面处理，铜包覆电镀，印制板阶梯槽，中间目标连接盘，可焊性测试，显微切片分析，以及热冲击和基于性能测试的微导通孔结构的可靠性问题等。 IPC-6012F与IPC-6011一起使用，取代IPC-6012E。
no-image-available

IPC/JEDEC-J-STD-033 - Revision D - Standard Only

潮湿、再流焊和工艺敏感器件的操作、包装、运输及使用

Document #:
IPC/JEDEC-J-STD-033
Revision
D
Product Type
Standard Only
Released:  12/18/2018
Language
Chinese
Current Revision
本文件的目的是，针对潮湿、再流焊和工艺敏感器件，向生产商和用户提供标准的操作、包装、运输及使用方法。所提供的这些方法可避免由于吸收湿气和暴露在再流焊温度下造成的封装损伤，这些损伤会导致合格率和可靠性的降低。一旦正确执行IPC/JEDEC J-STD-033D，这些工艺可以提供从密封时间算起12个月的最短保质期。由IPC和JEDEC开发。
no-image-available

IPC-J-STD-020 - Revision F - Standard Only

非气密表面贴装器件（SMDs）的潮湿/再流焊敏感度分级

Document #:
IPC/JEDEC-J-STD-020
Revision
F
Product Type
Standard Only
Released:  11/27/2023
Language
Chinese
Current Revision
IPC/JEDEC J-STD-020F标准旨在确定对湿气诱发应力敏感的非气密表面贴装器件（SMD）的潮湿敏感度分级，从而能够对其进行正确地包装、储存和操作，以避免其在再流焊连接和/或维修操作时受到损坏。 IPC/JEDEC J-STD-020F标准可用于确定非密封SMD鉴定应使用的分类级别。通过该测试方法中的标准本身不足以保证长期可靠性。根据JESD22-A113，本文件为SMD生成的湿度敏感度等级（MSL）用于确定预处理的浸泡条件，以及如何根据J-STD-033正确包装、储存和处理SMD，以避免在组装回流焊连接和/或维修操作期间损坏。 对于可能对过程敏感的IC器件，请参考J-STD-075，以确定是否需要PSL（过程敏感等级）分类。
26-50 of 97

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-8401: Guidelines for In-Mold Electronics

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly