Menu
Close
Contact IPC

Standards

Your results

Document #

Language

Products

IPC-HERMES-9852 V. 1.5 Cover Image

IPC/HERMES-9852 - Version 1.5 - Standard Only

The Global Standard for Machine-to-Machine Communication in SMT Assembly

Document #:
IPC/HERMES-9852
Revision
1.5
Product Type
Standard Only
Released:  01/13/2023
Language
English
Current Revision
The IPC-HERMES-9852 is an open industry standard, developed by the Hermes Standard Initiative and approved by IPC. The IPC-HERMES-9852 provides a state-of-the-art communication protocol for machine-to-machine communication for surface-mount technology. Specifically, IPC-HERMES-9852, version 1.5 provides additional alignment with IPC-2591 (IPC-CFX). Used with IPC-2591, Connected Factory Exchange...

IPC-1753 - Standard with Amendment 1

Laboratory Report Standard

Document #:
IPC-1753
Revision
Original Version
Product Type
Standard with amendment(s)
Released:  05/03/2018
Language
English
Current Revision
IPC 1753 WAM1 Laboratory Declaration Standard will allow for the electronic exchange of laboratory chemical analysis reports between supply chain members. Companies are being asked to provide laboratory analytic data to show compliance with the RoHS Directive and other customer requirements, such as halogen-free. This standard will allow for the expedited exchange of the necessary laboratory...
IPC-Hermes-9852 V 1.4 Cover Image

IPC/HERMES-9852 - Version 1.4 - Standard Only

The Global Standard for Machine-to-Machine Communication in SMT Assembly

Document #:
IPC/HERMES-9852
Revision
1.4
Product Type
Standard Only
Released:  04/13/2022
Language
English
Current Revision
The IPC-Hermes-9552 v. 1.4 is an open industry standard, developed by The Hermes Initiative and approved by IPC. The IPC-Hermes-9542 provide a state-of-the-art communication protocol for machine-to-machine communication for surface-mount technology (SMT). Specifically, IPC-HERMES-9852, version 1.4 provides additional alignment with IPC-2591 (IPC-CFX). Used with IPC-2591, Connected Factory Exchange...

IPC-1753 - Standard Only

Laboratory Report Standard

Document #:
IPC-1753
Revision
Original Version
Product Type
Standard Only
Released:  01/31/2014
Language
English
Current Revision
IPC-1753 Laboratory Declaration Standard will allow for the electronic exchange of laboratory chemical analysis reports between supply chain members. Companies are being asked to provide laboratory analytic data to show compliance with the RoHS Directive and other customer requirements, such as halogen-free. This standard will allow for the expedited exchange of the necessary laboratory...

IPC-NC-349 - Standard Only

Computer Numerical Control Formatting for Drillers and Routers

Document #:
IPC-NC-349
Revision
Original Version
Product Type
Standard Only
Released:  08/01/1985
Language
English
Current Revision
Defines a machine readable input format for Computer Numerical Control (CNC) drilling and routing machine tools used by the printed wiring board industry. The format may be used to transfer drilling and routing information between printed board designers, manufacturers and users or as the output CNC standard from converters that expand higher level design input such as IPC-D-350 data. Provides a...
no-image-available

IPC-J-STD-048 - Standard Only

Notification Standard for Product Discontinuance

Document #:
IPC-J-STD-048
Revision
Original Version
Product Type
Standard Only
Released:  05/02/2015
Language
English
Current Revision
This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...

IPC-T-50 - Revision M - Standard Only

Termes et Définitions pour les Circuits Électroniques Imprimés et Assemblés

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  06/30/2015
Language
French
Current Revision
Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...
no-image-available

IPC-T-50 - Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

IPC-T-50 - Revision K - Standard Only

Begriffe und Definitionen für Leiterplatten und elektronische Baugruppen

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  02/03/2015
Language
German
Current Revision
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
no-image-available

IPC-1754 - Amendment 2

Materials and Substances Declaration for Aerospace and Defense and Other Industries

Document #:
IPC-1754
Revision
Original Version
Product Type
Amendment
Released:  06/23/2020
Language
English
Current Revision
IPC-1754-Am2, establishes the requirements for the exchanging material and substance data for Products between suppliers and their customers and has been developed through the participation of aerospace, defense, automotive, electronics and solution provider representatives.
no-image-available

IPC-1072 - Amendment 1

Intellectual Property Protection in Electronic Assembly Manufacturing

Document #:
IPC-1072
Revision
Original Version
Product Type
Amendment
Released:  03/07/2017
Language
English
Current Revision
This amendment to IPC-1072 updates the document to align its requirements with the requirements in its counterpart standard IPC-1071 for PCB shops. 5 Pages. Released March 2017 This amendment cannot be used without a copy of IPC-1072 (December 2015). To purchase the original document please see Related Products and choose 1072(D)1
no-image-available

IPC/WHMA-A-620 - Revision E - Standard Only

ケーブルおよびワイヤーハーネス組立品の要求事項および許容基準 Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Standard Only
Released:  07/13/2023
Language
Japanese
Current Revision
IPC/WHMA-A-620Eは、ケーブルおよびワイヤーハーネス組立品の要求事項および許容基準に関する、唯一の業界合意文書(規格書)である。IPC/WHMA-A-620Eでは、ケーブルおよびハーネス組立品に関係する配線の圧着、機械的固定、またははんだ付を行うための材料、方法、試験、および許容基準、ならびに関連組立活動について説明している。 IPC/WHMA-A-620Eは、IPCおよびThe Wire Harness Manufacturers Association (WHMA) (IPCの関連団体)により作成されたものである。

IPC/WHMA-A-620 - Revision D - Standard Only

Godkendelseskrav for kabler og for produkter med wire harness

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  11/20/2020
Language
Danish
Current Revision
IPC/WHMA-A-620D er den eneste industriudviklede standard for ” Godkendelseskrav for kabler og for produkter med wire harness”. IPC/WHMA-A-620D beskriver materialer, metoder, test og godkendelseskriterier for fremstilling af crimpede samlinger, mekanisk sikrede og loddede forbindelser samt de tilhørende monteringsprocesser som er forbundet med kabel og harness produkter. IPC/WHMA-A-620D blev...
no-image-available

IPC/WHMA-A-620 - Revision D - Standard Only

Requisitos y admisibilidad de ensambles con cables y mazos de cables

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  06/17/2020
Language
Spanish
Current Revision
El IPC/WHMA-A-620D es el único estándar consensuado por el sector sobre Requisitos y aceptabilidad de ensambles de cables y mazos de cables. El estándar IPC/WHMA-A-620D describe los materiales, métodos, pruebas y criterios de aceptabilidad para la producción de interconexiones crimpadas, mecánicamente aseguradas o soldadas y las actividades de ensamble relacionadas que estén asociadas con...

IPC/WHMA-A-620 - Revision D - Standard Only

Exigences et acceptation des assemblages de câbles et de faisceaux de fils

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  06/17/2020
Language
French
Current Revision
IPC/WHMA-A-620D est la seule norme consensuelle de l’industrie pour les exigences et l’acceptation des assemblages de câbles et de faisceaux de fils. IPC/WHMA-A-620D décrit les matériaux, les méthodes, les tests et les critères d’acceptation pour la production d’ensembles interconnectés brasés, sertis et mécaniquement sécurisés, ainsi que les activités d’assemblage qui y sont associées pour...

IPC/WHMA-A-620 - Revision D - Standard Only

Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  06/17/2020
Language
German
Current Revision
IPC/WHMA-A-620D ist die einzige, im Branchenkonsens entwickelte Richtlinie für Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen. IPC/WHMA-A-620D beschreibt Materialien, Methoden, Tests und Abnahmekriterien für die Herstellung gecrimpter, mechanisch gesicherter oder gelöteter Verbindungen und die zu den Kabel- und Kabelbaum-Baugruppen zugehörigen Montageaktivitäten. IPC/WHMA-A...
IPC-WHMA-A-620D KR Cover

IPC/WHMA-A-620 - Revision D - Standard Only

케이블과 와이어 하네스 어셈블리의 요건과 허용 가능성

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  07/27/2021
Language
Korean
Current Revision
IPC/WHMA-A-620D는 케이블 및 와이어 하네스 어셈블리의 요건과 및 허용 가능성에 대해 업계에서 유일하게 합의된 표준입니다. IPC/WHMA-A-620D는 크림핑된 기계적으로 고정되고 솔더링된 상호연결의 생산을 위한 물질, 방법, 테스트 및 허용 기준과 케이블 및 하네스 어셈블리와 관련된 조립 활동을 설명한다. IPC/WHMA-A-620D는 IPC와 WHMA(Wire Hanage Manufacturers Association)에 의해 개발되었다.

IPC/WHMA-A-620 - Revision D - Standard Only

Eisen en acceptatie van kabel en kabelboomassemblages

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  09/10/2020
Language
Dutch
Current Revision
IPC/WHMA-A-620D is de enige consensusstandaard in de branche voor eisen en acceptatie van kabel- en kabelboomassemblages. IPC/WHMA-A-620D beschrijft materialen, methoden, tests en acceptatiecriteria voor het produceren van krimp-, mechanisch beveiligde en gesoldeerde verbindingen en de bijbehorende assemblageactiviteiten in verband met kabels en kabelbomen. IPC/WHMA-A-620D is ontwikkeld door IPC...

IPC/WHMA-A-620 - Revision D - Standard Only

线缆及线束组件的要求与验收

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  06/17/2020
Language
Chinese
Current Revision
IPC/WHMA-A-620D 是线缆及线束组件的要求与验收的唯一行业共识标准。本标准描述了用于压接、机械紧固或焊接互连的材料、方法、测试和可接受性标准以及其他线缆线束组件组装活动的相关标准。 IPC / WHMA-A-620D由IPC和线束制造商协会（WHMA）（隶属于IPC）共同开发。 全文共420页。2020年1月开发。2020年5月翻译。
no-image-available

IPC/WHMA-A-620 - Revision E - Standard Only

线缆及线束组件的要求与验收Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Standard Only
Released:  07/26/2023
Language
Chinese
Current Revision
IPC/WHMA-A-620E 是线缆及线束组件的要求与验收的唯一行业共识标准。本标准描述了用于压接、机械紧固或焊接互连的材料、方法、测试和可接受性标准以及其他线缆线束组件组装活动的相关标准。 IPC/WHMA-A-620E由IPC和线束制造商协会（WHMA）（隶属于IPC）共同开发。
no-image-available

IPC/WHMA-A-620 - Revision D - Standard Only

Wymagania i akceptacje dla montażu kabli i wiązek przewodów

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  03/12/2021
Language
Polish
Current Revision
IPC/WHMA-A-620D jest jedynym standardem branżowym dotyczącym Wymagań i Akceptacji dla Montażu Kabli i Wiązek Przewodów. IPC/WHMA-A-620D opisuje materiały, metody, testy i kryteria akceptacji dla tworzenia zagniatanych, mechanicznie zabezpieczonych i lutowanych połączeń oraz powiązanych czynności montażowych związanych z zespołami kabli i wiązek przewodów. IPC/WHMA-A-620D został opracowany przez...
26-50 of 83

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-8401: Guidelines for In-Mold Electronics

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly