Menu
Close
Contact IPC

Standards

Your results

Document #

Language

Products

IPC-T-50N Cover Image

IPC-T-50 - Revision N - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  11/30/2021
Language
English
Current Revision
IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...
IPC-WHMA-A-620E Cover Image

IPC/WHMA-A-620 - Revision E - Standard Only

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Standard Only
Released:  10/19/2022
Language
English
Current Revision
IPC/WHMA-A-620E is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620E describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620E was developed by IPC and...
no-image-available

IPC-7711/21 - Revision D - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
D
Product Type
Standard Only
Released:  02/06/2024
Language
English
Current Revision
The IPC-7711/21 guide provides procedures for rework, repair and modification of printed board assemblies, including tools and materials, common procedures, coating removal and graphics to assist the user.
no-image-available

IPC-1782 - Revision B - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
B
Product Type
Standard Only
Released:  10/20/2023
Language
English
Current Revision
IPC-1782B establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782B applies to all products, processes, assemblies, parts, components, equipment used and other items as defined by users and suppliers in the manufacture of printed board assemblies, as well as mechanical assembly and printed board fabrication. IPC-1782B is applicable both for...

IPC-2581 - Revision C - Standard Only

Generic Requirements for Printed Board Assembly Products Manufacturing Description Data and Transfer Methodology

Document #:
IPC-2581
Revision
C
Product Type
Standard Only
Released:  11/20/2020
Language
English
Current Revision
The IPC-2581C standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most...

IPC-9850 - Revision A - Standard Only

Surface Mount Placement Equipment Characterization

Document #:
IPC-9850
Revision
A
Product Type
Standard Only
Released:  12/21/2011
Language
English
Current Revision
This standard establishes the parameters, procedures and methodologies used to measure and report pick and place machine accuracy as a relationship to placement speed for a range of SMT component sizes and configurations. Purchase of this standard includes support documentation, report forms and the test material drawings in DWG format.
IPC-A-620E Space Cover Image

IPC/WHMA-A-620 - Revision E - Addendum - Space and Military

Space and Military Applications Electronic Hardware Addendum to IPC/WHMA-A-620

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Addendum
Released:  11/28/2023
Language
English
Current Revision
IPC/WHMA-A-620E-S space addendum provides additional requirements to IPC/WHMA-A-620E standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620E-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...

IPC-T-50 - Revision M - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  05/26/2015
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

IPC-T-50 - Revision K - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  07/17/2013
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...
no-image-available

IPC/WHMA-A-620 - Revision C - Addendum - Rail Transit

Rail Transit Addendum to IPC/WHMA-A-620C

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Addendum
Released:  05/31/2022
Language
English
Current Revision
IPC/WHMA-A-620C-R rail transit addendum provides additional requirements to IPC/WHMA-A-620C standard, describing materials, methods, tests, and acceptance criteria for producing crimped, mechanically secured, and soldered interconnections. It also provides the related assembly activities associated with cable and harness assemblies in rail transit industry, to ensure the high reliability and...
no-image-available

IPC-T-50 - Revision J - Standard Only

SUPERSEDED BY T-50K

Document #:
IPC-T-50
Revision
J
Product Type
Standard Only
Released:  10/18/2011
Language
English
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...

IPC/WHMA-A-620 - Revision D - Standard Only

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  01/21/2020
Language
English
IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...
no-image-available

IPC/WHMA-A-620 - Standard Only

IPC/WHMA-A-620 Test Data Tables

Document #:
IPC/WHMA-A-620
Revision
Original Version
Product Type
Standard Only
Released:  01/01/2012
Language
English
Current Revision
These tables are from IPC/WHMA-A-620 Revision B Chapter 19 Testing. They are provided in an electronic format that permits users to edit the tables to add user-specific criteria. These files are authorized for copying/reproduction.
no-image-available

IPC-2591 - Version 1.7 - Standard Only

Connected Factory Exchange (CFX)

Document #:
IPC-2591
Revision
1.7
Product Type
Standard Only
Released:  08/24/2023
Language
English
Current Revision
This standard establishes the requirements for the omnidirectional exchange of information between manufacturing processes and associated host systems for assembly manufacturing. This standard applies to communication between all executable processes in the manufacture of printed board assemblies, automated, semiautomated and manual, and is applicable to related mechanical assembly and...
no-image-available

IPC/WHMA-A-620 - Revision E - Redline Standard

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Redline Standard
Released:  03/06/2023
Language
English
Current Revision
IPC/WHMA-A-620E-RL is a redline document showing the difference from IPC/WHMA-A-620D to IPC/WHMA-A-620E. IPC/WHMA-A-620E-RL provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows deleted/changed text in the IPC/WHMA-A-620D pages and new/revised text in the IPC/WHMA-A-620E pages. Due to the complexity of this document, it is only available in...
no-image-available

IPC-1756 - Standard Only

Manufacturing Process Data Management

Document #:
IPC-1756
Revision
Original Version
Product Type
Standard Only
Released:  04/05/2010
Language
English
Current Revision
IPC-1756 establishes the requirements for exchanging manufacturing data between suppliers and customers for electrical and electronic products. IPC-1756 establishes 23 fields for declaration of manufacturing data supported by Scriba and other tools developed for use between users and suppliers. The type of manufacturing information includes sensitivity to moisture and high temperature, different...
IPC/DAC-2552 Cover Image

IPC-DAC-2552 - Standard Only

General Electronic Components Model Based Definition (MBD) Standard

Document #:
IPC/DAC-2552
Revision
Original Version
Product Type
Standard Only
Released:  08/02/2022
Language
English
Current Revision
The IPC/DAC-2552 standard was developed jointly with the Digital Association of China (DAC), with the purpose to use Model Based Definition (MBD) to realize efficient and high-quality digital design of board-level assembly, support electronic assembly virtual manufacturing, and enabling the digitalization from requirement to product realization for printed board assemblies. The IPC/DAC-2552...
no-image-available

IPC-2501 - Standard Only

Definition for Web-Based Exchange of XML Data

Document #:
IPC-2501
Revision
Original Version
Product Type
Standard Only
Released:  07/01/2003
Language
English
Current Revision
IPC-2501 establishes the governing semantics and an XML based syntax for shop floor communication between electronic assembly equipment and associated software applications. This standard outlines the communication architecture and supporting XML messages. The standard also describes a messaging interface that is based upon an architecture whereby a single logical middleware server (the Message...
IPC-HERMES-9852 V. 1.5 Cover Image

IPC/HERMES-9852 - Version 1.5 - Standard Only

The Global Standard for Machine-to-Machine Communication in SMT Assembly

Document #:
IPC/HERMES-9852
Revision
1.5
Product Type
Standard Only
Released:  01/13/2023
Language
English
Current Revision
The IPC-HERMES-9852 is an open industry standard, developed by the Hermes Standard Initiative and approved by IPC. The IPC-HERMES-9852 provides a state-of-the-art communication protocol for machine-to-machine communication for surface-mount technology. Specifically, IPC-HERMES-9852, version 1.5 provides additional alignment with IPC-2591 (IPC-CFX). Used with IPC-2591, Connected Factory Exchange...
IPC-Hermes-9852 V 1.4 Cover Image

IPC/HERMES-9852 - Version 1.4 - Standard Only

The Global Standard for Machine-to-Machine Communication in SMT Assembly

Document #:
IPC/HERMES-9852
Revision
1.4
Product Type
Standard Only
Released:  04/13/2022
Language
English
Current Revision
The IPC-Hermes-9552 v. 1.4 is an open industry standard, developed by The Hermes Initiative and approved by IPC. The IPC-Hermes-9542 provide a state-of-the-art communication protocol for machine-to-machine communication for surface-mount technology (SMT). Specifically, IPC-HERMES-9852, version 1.4 provides additional alignment with IPC-2591 (IPC-CFX). Used with IPC-2591, Connected Factory Exchange...
no-image-available

IPC-J-STD-048 - Standard Only

Notification Standard for Product Discontinuance

Document #:
IPC-J-STD-048
Revision
Original Version
Product Type
Standard Only
Released:  05/02/2015
Language
English
Current Revision
This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...

IPC-7711/21 - Revision C - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  02/01/2017
Language
English
This guide provides procedures for rework, repair and modification of printed board assemblies. Included in this revision are the procedures previously released as change pages, an updated general information and common procedures section, new procedures for BGAs using focused IR Reflow Systems with integral preheater and general updates to all other procedures.
1-25 of 146

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly