Menu
Close
Contact IPC

Standards

Your results

Document #

Language

Products

IPC-T-50N Cover Image

IPC-T-50 - Revision N - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  11/30/2021
Language
English
Current Revision
IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...
IPC-WHMA-A-620E Cover Image

IPC/WHMA-A-620 - Revision E - Standard Only

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Standard Only
Released:  10/19/2022
Language
English
Current Revision
IPC/WHMA-A-620E is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620E describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620E was developed by IPC and...
no-image-available

IPC-7711/21 - Revision D - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
D
Product Type
Standard Only
Released:  02/06/2024
Language
English
Current Revision
The IPC-7711/21 guide provides procedures for rework, repair and modification of printed board assemblies, including tools and materials, common procedures, coating removal and graphics to assist the user.
no-image-available

IPC-1782 - Revision B - Standard Only

Standard for Manufacturing and Supply Chain Traceability of Electronic Products

Document #:
IPC-1782
Revision
B
Product Type
Standard Only
Released:  10/20/2023
Language
English
Current Revision
IPC-1782B establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782B applies to all products, processes, assemblies, parts, components, equipment used and other items as defined by users and suppliers in the manufacture of printed board assemblies, as well as mechanical assembly and printed board fabrication. IPC-1782B is applicable both for...
no-image-available

IPC-1752 - Revision B - Standard Only

Materials Declaration Management Standard

Document #:
IPC-1752
Revision
B
Product Type
Standard Only
Released:  07/01/2020
Language
English
Current Revision
The IPC-1752B standard establishes the requirements for exhanging material and substance data between suppliers and their customers for electrical and electronics products and other produicts. IPC-1752B includes data fields to help supply chain members transfer materials data required for submission into the ECHA SCIP database.
no-image-available

IPC-1751 - Revision A - Standard Only

Generic Requirements for Declaration Process Management

Document #:
IPC-1751
Revision
A
Product Type
Standard Only
Released:  03/16/2010
Language
English
Current Revision
Amendment 1 to IPC-1751A standard provides the principles and details for declarations necessary between members of a supply chain relationship. This standard is the first in a series of standards that permits segmentation of declaration details based on the subject and scope of the declaration as well as the manufacturing domain. This standard contains general information and is supplemented by...

IPC-1755 - Revision A - Standard Only

Responsible Sourcing of Minerals Data Exchange Standard

Document #:
IPC-1755
Revision
A
Product Type
Standard Only
Released:  04/14/2020
Language
English
Current Revision
The IPC-1755A standard establishes the requirements for exchanging data between suppliers and their customers in regard to the responsible resourcing of minerals. The IPC-1755As standard originally addressed conflict minerals within the scope of the Dodd-Frank Act in the US. IPC-1755A expands the scope of this document to address global responsible minerals sourcing.
IPC-1755A Am1 Cover Image

IPC-1755 - Revision A - Amendment 1

Responsible Sourcing of Minerals Data Exchange Standard

Document #:
IPC-1755
Revision
A
Product Type
Amendment
Released:  10/27/2021
Language
English
Current Revision
IPC-1755A-Am1 cannot be used without a copy of IPC-1755A the base standard. You can purchase IPC-1755A-Am1 and IPC-1755A in the IPC.org online store. The IPC-1755A standard establishes the requirements for exchanging data between suppliers and their customers regarding the responsible resourcing of minerals. The IPC-1755 standard originally addressed conflict minerals within the scope of the Dodd...
IPC-A-620E Space Cover Image

IPC/WHMA-A-620 - Revision E - Addendum - Space and Military

Space and Military Applications Electronic Hardware Addendum to IPC/WHMA-A-620

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Addendum
Released:  11/28/2023
Language
English
Current Revision
IPC/WHMA-A-620E-S space addendum provides additional requirements to IPC/WHMA-A-620E standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620E-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...

IPC-T-50 - Revision M - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  05/26/2015
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

IPC-T-50 - Revision K - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  07/17/2013
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...
no-image-available

IPC/WHMA-A-620 - Revision C - Addendum - Rail Transit

Rail Transit Addendum to IPC/WHMA-A-620C

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Addendum
Released:  05/31/2022
Language
English
Current Revision
IPC/WHMA-A-620C-R rail transit addendum provides additional requirements to IPC/WHMA-A-620C standard, describing materials, methods, tests, and acceptance criteria for producing crimped, mechanically secured, and soldered interconnections. It also provides the related assembly activities associated with cable and harness assemblies in rail transit industry, to ensure the high reliability and...
no-image-available

IPC-T-50 - Revision J - Standard Only

SUPERSEDED BY T-50K

Document #:
IPC-T-50
Revision
J
Product Type
Standard Only
Released:  10/18/2011
Language
English
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...

IPC/WHMA-A-620 - Revision D - Standard Only

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  01/21/2020
Language
English
IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...
no-image-available

IPC-1756 - Standard Only

Manufacturing Process Data Management

Document #:
IPC-1756
Revision
Original Version
Product Type
Standard Only
Released:  04/05/2010
Language
English
Current Revision
IPC-1756 establishes the requirements for exchanging manufacturing data between suppliers and customers for electrical and electronic products. IPC-1756 establishes 23 fields for declaration of manufacturing data supported by Scriba and other tools developed for use between users and suppliers. The type of manufacturing information includes sensitivity to moisture and high temperature, different...
no-image-available

IPC/WHMA-A-620 - Standard Only

IPC/WHMA-A-620 Test Data Tables

Document #:
IPC/WHMA-A-620
Revision
Original Version
Product Type
Standard Only
Released:  01/01/2012
Language
English
Current Revision
These tables are from IPC/WHMA-A-620 Revision B Chapter 19 Testing. They are provided in an electronic format that permits users to edit the tables to add user-specific criteria. These files are authorized for copying/reproduction.

IPC-1758 - Standard Only

Declaration Requirements for Shipping, Pack and Packing Materials

Document #:
IPC-1758
Revision
Original Version
Product Type
Standard Only
Released:  05/22/2012
Language
English
Current Revision
This standard addresses the industry need for exchange of information regarding the materials used to protect products during shipment between supply chain partners. This standard is one of several in the 175x series of standards that permits segmentation of declaration details based on the subject and scope of the declaration. This standard describes essential information exchange content with...
no-image-available

IPC/WHMA-A-620 - Revision E - Redline Standard

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Redline Standard
Released:  03/06/2023
Language
English
Current Revision
IPC/WHMA-A-620E-RL is a redline document showing the difference from IPC/WHMA-A-620D to IPC/WHMA-A-620E. IPC/WHMA-A-620E-RL provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows deleted/changed text in the IPC/WHMA-A-620D pages and new/revised text in the IPC/WHMA-A-620E pages. Due to the complexity of this document, it is only available in...

IPC-1753 - Standard with Amendment 1

Laboratory Report Standard

Document #:
IPC-1753
Revision
Original Version
Product Type
Standard with amendment(s)
Released:  05/03/2018
Language
English
Current Revision
IPC 1753 WAM1 Laboratory Declaration Standard will allow for the electronic exchange of laboratory chemical analysis reports between supply chain members. Companies are being asked to provide laboratory analytic data to show compliance with the RoHS Directive and other customer requirements, such as halogen-free. This standard will allow for the expedited exchange of the necessary laboratory...

IPC-1753 - Standard Only

Laboratory Report Standard

Document #:
IPC-1753
Revision
Original Version
Product Type
Standard Only
Released:  01/31/2014
Language
English
Current Revision
IPC-1753 Laboratory Declaration Standard will allow for the electronic exchange of laboratory chemical analysis reports between supply chain members. Companies are being asked to provide laboratory analytic data to show compliance with the RoHS Directive and other customer requirements, such as halogen-free. This standard will allow for the expedited exchange of the necessary laboratory...

IPC-NC-349 - Standard Only

Computer Numerical Control Formatting for Drillers and Routers

Document #:
IPC-NC-349
Revision
Original Version
Product Type
Standard Only
Released:  08/01/1985
Language
English
Current Revision
Defines a machine readable input format for Computer Numerical Control (CNC) drilling and routing machine tools used by the printed wiring board industry. The format may be used to transfer drilling and routing information between printed board designers, manufacturers and users or as the output CNC standard from converters that expand higher level design input such as IPC-D-350 data. Provides a...
no-image-available

IPC-J-STD-048 - Standard Only

Notification Standard for Product Discontinuance

Document #:
IPC-J-STD-048
Revision
Original Version
Product Type
Standard Only
Released:  05/02/2015
Language
English
Current Revision
This standard is applicable to suppliers of, and affected customers for, electronic products and their constituent components. The goal of this notification standard is to better enable customers to manage and mitigate the disruption caused by the discontinuation of a product and to ensure continuity of supply. This standard establishes the requirements for timely customer notification of planned...
1-25 of 139

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-8401: Guidelines for In-Mold Electronics

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly