Standards

Your results

Products

Document #:

IPC-9241

Revision

Original Version

Product Type

Standard Only

Released: 01/13/2017

Language

English

Current Revision

This standard is intended as a guideline in the proper preparation of a metallographic sample (microsection) of a printed board. The finished microsection is used for evaluating the quality of the laminate system and plated structures (e.g. PTHs and vias). Microsection sample preparation is regarded by many as a highly developed skill. The guidelines in this standard discuss the many variables and...

Document #:

IPC-MC-790

Revision

Original Version

Product Type

Standard Only

Released: 07/01/1992

Language

English

Current Revision

Provides information on multichip module technology, including parametric data, design and manufacturing information and a proposed categorization of various approaches to multichip interconnect substrate technologies based on dielectric family. 120 pages. Released August 1992.

Document #:

IPC-9631

Revision

Original Version

Product Type

Standard Only

Released: 12/15/2010

Language

English

Current Revision

IPC-9631 addresses concerns and considerations related to IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation. This document describes how the test method is intended for use and the rationale behind some of the protocols and requirements. This document was developed with the understanding that the test method will require special equipment and the proper set-up and...

Document #:

IPC-SM-840

Revision

Product Type

Standard Only

Released: 04/30/2007

Language

English

Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reﬂect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

Document #:

IPC-5703

Revision

Original Version

Product Type

Standard Only

Released: 05/17/2013

Language

English

Current Revision

Printed board cleanliness has historically been an unknown factor in the quality assessment of unpopulated (bare) printed boards; this has often been attributed to a lack of understanding of materials and processes. This document addresses the various printed board fabrication processes and how each may impact, directly or indirectly, the final cleanliness of packaged bare printed boards and...

Document #:

IPC-5702

Revision

Original Version

Product Type

Standard Only

Released: 06/01/2007

Language

English

Current Revision

Every electronics manufacturer, whether an original equipment manufacturer (OEM) or electronics manufacturing services (EMS) company, must determine if the unpopulated printed boards entering the assembly process have an adequate level of cleanliness. The question of “how clean is clean enough?” is one that has no definitive answer, as there is no "golden number" for board cleanliness. The issue...

Document #:

IPC-7711/21

Revision

Product Type

Standard Only

Released: 02/01/2017

Language

English

This guide provides procedures for rework, repair and modification of printed board assemblies. Included in this revision are the procedures previously released as change pages, an updated general information and common procedures section, new procedures for BGAs using focused IR Reflow Systems with integral preheater and general updates to all other procedures.

Document #:

IPC/JEDEC-J-STD-033

Revision

Product Type

Standard Only

Released: 08/01/2014

Language

English

Provides surface mount device manufacturers and users with standardized methods for handling, packing, shipping and use of moisture/reflow sensitive components. These methods help avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation and damaged components. These procedures provide a minimum shelf life of 12 months...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 06/30/2015

Language

French

Current Revision

Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...

Document #:

IPC/JEDEC-J-STD-609

Revision

Product Type

Standard Only

Released: 06/01/2012

Language

English

This is a list of reported errata to the printed copies of IPC/JEDEC J-STD-609A. Pen and ink changes should be made in accordance with your company's document control policies.

Document #:

IPC-7095

Revision

Product Type

Standard Only

Released: 04/02/2008

Language

English

Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095B delivers useful and practical information to anyone currently using BGAs or considering a conversion to area array packaging formats. This has become especially important due to the change in the alloys being used, both...

Document #:

IPC-7095

Revision

Product Type

Standard Only

Released: 10/01/2004

Language

English

Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. Revision A of this document delivers useful and practical information to anyone who is currently using BGAs or is considering a conversion to area array packaging formats. In addition to providing guidelines for BGA inspection...

Document #:

IPC-6012

Revision

Product Type

Standard Only

Released: 04/13/2010

Language

English

Dual-language (Spanish/English) DVD -- Introduces industry specifications J-STD-001 & IPC-A-610 and explains the concept of process indicators. Includes an animated examination of the invisible problems that can be created during rework to explain why it's so important to avoid unnecessary rework. Reviews each of the tools and materials for plated-through hole (PTH) rework (including low-residue...

Document #:

IPC-1791

Revision

Product Type

Standard Only

Released: 03/22/2023

Language

English

IPC-1791C provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and chain of...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 01/13/2023

Language

Chinese

Current Revision

IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

Document #:

IPC-1791

Revision

Product Type

Standard Only

Released: 02/20/2020

Language

English

IPC-1791A standard provides minimum requirements, policies and procedures for printed board design, fabrication and assembly organizations and/or companies to become trusted sources for markets requiring high levels of conﬁdence in the integrity of delivered products. Revision A of IPC-1791 standard includes the requirements added for CAGE Code, citizenship, security, foreign person access...

Document #:

IPC-1791

Revision

Product Type

Standard Only

Released: 09/15/2021

Language

English

IPC-1791B standard provides minimum requirements, policies and procedures for printed board design, fabrication, and assembly organizations and/or companies to become trusted sources for markets requiring high levels of conﬁdence in the integrity of delivered products. IPC-1791B expands the standard’s requirements to account for trusted sources of cable and wire harness assemblies.

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 02/03/2015

Language

German

Current Revision

Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...

Document #:

IPC-6018

Revision

Product Type

Standard Only

Released: 08/09/2016

Language

English

This specification covers qualification and performance of high frequency (microwave) boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as...

Document #:

IPC-6013

Revision

Product Type

Standard Only

Released: 12/18/2013

Language

English

Covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. Revision C incorporates new and updated requirements for final finishes, surface and hole plating...

Document #:

IPC-7711/21

Revision

Product Type

Standard Only

Released: 11/30/2007

Language

English

This guide includes everything needed for repair and rework of electronic assemblies and printed circuit boards. IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new...

Document #:

IPC-6012

Revision

Product Type

Addendum with amendment(s)

Released: 12/01/2018

Language

English

The IPC-6012DA-WAM1 Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012D, Revision D, for rigid printed boards that must survive the vibration and thermal cycling environments of electronic interconnects within the automotive industry. The amendment changes to this document includes updated requirements for lifted...

Document #:

IPC-6013

Revision

Product Type

Amendment

Released: 05/03/2018

Language

English

IPC-6013D-AM1 is an amendment makes changes to the existing acceptance criteria for copper wrap plating measurements as deﬁned by IPC-6013D. IPC-6013D-AM1 is an amendment which implements a dual criterion for Class 3 copper wrap plating, based on design effectivity (before and after July 01, 2018), so as not to impose onto legacy designs any additional qualiﬁcation activity associated with...

Document #:

IPC-6012

Revision

Product Type

Amendment

Released: 09/01/2017

Language

English

The IPC-6012D-AM1 makes changes to the existing acceptance criteria for copper wrap plating measurements as deﬁned by IPC-6012D. The IPC-6012D-AM1 implements a dual criterion for Class 3 copper wrap plating, based on design effectivity (before and after January 01, 2018), so as not to impose onto legacy designs any additional qualiﬁcation activity associated with adopting acceptance requirements...

Document #:

IPC-6012

Revision

Product Type

Standard Only

Released: 04/01/2024

Language

Chinese

Current Revision

此标准涵盖了刚性印制板的鉴定和性能要求，印制板类型包括单/双面板、带或不带镀覆孔、带或不带盲孔/埋孔和金属芯的多层板。该规范涉及最终产品和表面处理涂敷要求、导体、通孔/过孔、验收测试频次和质量一致性以及电气、机械和环境要求。IPC-6012F新增和修订了一些印制板的要求，例如背钻孔结构，选择性表面处理，铜包覆电镀，印制板阶梯槽，中间目标连接盘，可焊性测试，显微切片分析，以及热冲击和基于性能测试的微导通孔结构的可靠性问题等。 IPC-6012F与IPC-6011一起使用，取代IPC-6012E。