Standards

Your results

Products

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 11/30/2021

Language

English

Current Revision

IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...

Document #:

IPC-7095

Revision

Product Type

Standard with amendment(s)

Released: 07/09/2019

Language

English

Current Revision

The IPC-7095D-AM1 standard describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095D-AM1 provides the useful and practical information to those who use or are considering using BGAs. IPC-7095D-AM1 provides...

Document #:

IPC-7093

Revision

Product Type

Standard Only

Released: 11/30/2020

Language

English

Current Revision

The IPC-7093A standard provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093A provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.

Document #:

IPC-7525

Revision

Product Type

Standard Only

Released: 02/28/2022

Language

English

Current Revision

The IPC-7525C standard provides guidance for the design and fabrication of stencils for solder paste and surface-mount adhesive with much of the content based on the experience of stencil designers, fabricators, and users.

Document #:

IPC-1782

Revision

Product Type

Standard Only

Released: 10/20/2023

Language

English

Current Revision

IPC-1782B establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782B applies to all products, processes, assemblies, parts, components, equipment used and other items as deﬁned by users and suppliers in the manufacture of printed board assemblies, as well as mechanical assembly and printed board fabrication. IPC-1782B is applicable both for...

Document #:

IPC-7530

Revision

Product Type

Standard Only

Released: 04/28/2017

Language

English

Current Revision

This standard provides useful and practical information for developing thermal profiles to produce acceptable SnPb and Pb-free electronics assemblies. This revision expands the focus of the original standard from reflow profiling to include profiling for vapor phase, laser, selective soldering and wave soldering. The revision also includes a full-color troubleshooting guide for addressing common...

Document #:

IPC-7094

Revision

Product Type

Standard Only

Released: 02/14/2018

Language

English

Current Revision

IPC-7094A describes the design and assembly challenges for implementing flip chip technology in a direct chip attach (DCA) assembly. The effect of bare-die or die-size components in a flip chip format has an impact on component characteristics and dictates the appropriate assembly methodology. The IPC-7094A standard focuses on design, assembly methodology, critical inspection, repair and...

Document #:

IPC-7091

Revision

Product Type

Standard Only

Released: 01/13/2023

Language

English

Current Revision

This document describes the design and assembly challenges and ways to address those challenges for implementing 3D component technology. Recognizing the eﬀects of combining multiple uncased semiconductor die elements in a single-package format can impact individual component characteristics and can dictate suitable assembly methodology. The information contained in this standard focuses on...

Document #:

IPC-D-356

Revision

Product Type

Standard Only

Released: 10/01/2002

Language

English

Current Revision

UPDATED! This standard describes a data format for transmitting bare board electrical test information in digital form, including data suitable for computer-aided repair. When used as a netlist input to test data processing, the receiver of IPC-D-356B data will determine test point assignments and positioning. Enhancements to the B Revision include updates to the concept of testable areas to...

Document #:

IPC-2581

Revision

Product Type

Standard Only

Released: 11/20/2020

Language

English

Current Revision

The IPC-2581C standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most...

Document #:

IPC-PE-740

Revision

Product Type

Standard Only

Released: 12/01/1997

Language

English

Current Revision

This is the document all process engineers must have! Useful for day-to-day problem solving, it contains case histories of problems and corrective action in the design, manufacture, assembly and testing of printed wiring products. Each section has been updated to reflect today's manufacturing challenges. Sections address documentation, phototooling, raw materials, mechanical operations, hole...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 05/26/2015

Language

English

This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 07/17/2013

Language

English

This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 10/18/2011

Language

English

This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...

Document #:

IPC-2612

Revision

Original Version

Product Type

Standard Only

Released: 04/30/2010

Language

English

Current Revision

This standard establishes the requirements for the documentation of electronic diagrams used as the foundation for defining the electrical interconnectivity of electronic products. The description pertains to either schematic diagrams, logic diagrams or Boolean truth tables and includes methodology for defining circuit flow, electrical or functional restrictions, or maintenance test procedures...

Document #:

IPC-5262

Revision

Original Version

Product Type

Standard Only

Released: 10/17/2022

Language

English

Current Revision

The IPC-5262 prescribes the minimum design, critical process and acceptance requirements for the application of polymeric materials to electrical/electronic components, modules, printed wiring assemblies and other elements thereof. The intent of IPC-5262 is to establish a baseline of requirements, procedures, practices and process attributes based on lessons learned and best practices that have...

Document #:

IPC-2611

Revision

Original Version

Product Type

Standard Only

Released: 04/30/2010

Language

English

Current Revision

This standard establishes the generic requirements for a document set describing electronic products, and the methodology used for revision control and configuration management of the information. The generic descriptions apply to the entire document set and are used to define and maintain the electronic product. The methodology permits different grades of completeness of the documentation, as...

Document #:

IPC-2612-1

Revision

Original Version

Product Type

Standard Only

Released: 04/30/2010

Language

English

Current Revision

This standard establishes the requirements for generation of electronic symbols used in the documentation of electronic diagrams that define the electrical interconnectivity of electronic products. The descriptions pertain to schematic symbols, logic symbols or Boolean truth tables required to define the circuit configuration. Where appropriate, the standard also includes methodology for defining...

Document #:

IPC-2614

Revision

Original Version

Product Type

Standard Only

Released: 04/30/2010

Language

English

Current Revision

This standard establishes the requirements for the documentation of printed circuit board fabrication, and identifies the physical attributes and performance requirements of the unpopulated product. The descriptions apply to rigid, flexible, inorganic substrates or any combination thereof. The construction may be single, double, multilayered, or HDI technology and may include embedded (integrated)...

Document #:

IPC/DAC-2552

Revision

Original Version

Product Type

Standard Only

Released: 08/02/2022

Language

English

Current Revision

The IPC/DAC-2552 standard was developed jointly with the Digital Association of China (DAC), with the purpose to use Model Based Definition (MBD) to realize efficient and high-quality digital design of board-level assembly, support electronic assembly virtual manufacturing, and enabling the digitalization from requirement to product realization for printed board assemblies. The IPC/DAC-2552...

Document #:

IPC-7621

Revision

Original Version

Product Type

Standard Only

Released: 02/14/2018

Language

English

Current Revision

Encapsulation, for the purpose of IPC-7621 standard, is defined as a low pressure molded thermoplastic, e.g., polyamide, which is brought to a liquid state and injection molded and (rather quickly) returned to a temperature below its melting point., forming a durable yet pliable (rubbery-like) form. The desired performance characteristics of low pressure molding (LPM) encapsulation depend on the...

Document #:

IPC-D-859

Revision

Original Version

Product Type

Standard Only

Released: 12/01/1989

Language

English

Current Revision

This standard covers the requirements and considerations for the design of multilayer hybrid circuits based on industry manufacturing capabilities. 80 pages. Released December 1989.

Document #:

IPC-7095

Revision

Product Type

Standard Only

Released: 01/28/2013

Language

English

Implementing ball grid array (BGA) and fine-pitch ball grid array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095C delivers useful and practical information to anyone currently using BGAs or FBGAs. Many issues have become especially important due to the change in the alloys of the ball, the ball shape, and the attachment procedures...

Document #:

IPC-1782

Revision

Product Type

Standard Only

Released: 01/13/2021

Language

English

The IPC-1782A standard establishes minimum requirements for manufacturing and supply chain traceability based on perceived risk. IPC-1782A applies to all products, processes, assemblies, parts, components, equipment and other items used in the manufacture of printed board assemblies and in mechanical assembly.

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 06/30/2015

Language

French

Current Revision

Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...