Standards

Your results

Products

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 10/19/2022

Language

English

Current Revision

IPC/WHMA-A-620E is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620E describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620E was developed by IPC and...

Document #:

IPC-SM-840

Revision

Product Type

Standard Only

Released: 12/22/2010

Language

English

Current Revision

Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reﬂect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

Document #:

IPC-CC-830

Revision

Product Type

Standard Only

Released: 01/15/2019

Language

English

Current Revision

The IPC-CC-830C standard establishes qualification and conformance requirements for electrical insulating compounds (conformal coatings). It has been designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy. The IPC-CC-830C standard covers: • The qualification and qualification retention of the conformal coating material (Table 3-1...

Document #:

IPC-9204

Revision

Product Type

Standard Only

Released: 05/05/2017

Language

English

Current Revision

This guideline describes flexibility and stretchability testing to evaluate printable electronics for stretchable and wearable applications. 26 pages. Released March 2017

Document #:

IPC-CH-65

Revision

Product Type

Standard Only

Released: 07/25/2011

Language

English

Current Revision

This document includes lead free, no-clean, and environmental friendly chemistries. This is a collection of information on electronic board and assembly cleaning in a single location. This major revision explains the relationship between materials, processes, and contaminants in fabrication and assembly operations. It also addresses cleanliness assessment and process control in relation to...

Document #:

IPC-4591

Revision

Product Type

Standard Only

Released: 01/01/2018

Language

English

Current Revision

The IPC-4591A standard establishes the classification system and the qualification and quality conformance requirements for functional conductive materials used in printed electronics applications. It provides companies that procure functional materials for printed electronics with the necessary technical structure to design and manufacture products meeting conformance to industry-determined...

Document #:

IPC-4921

Revision

Product Type

Standard Only

Released: 06/27/2017

Language

English

Current Revision

This standard provides and defines key characteristics and test methods for procuring printed electronics substrates. Includes six materials specification sheets.

Document #:

IPC-SM-817

Revision

Product Type

Standard Only

Released: 12/23/2014

Language

English

Current Revision

Provides requirements for dielectric adhesives to hold components in place from the mounting to the soldering process and identifies test methods to ensure their long term properties. 9 pages. Released December 2014.

Document #:

IPC-6903

Revision

Product Type

Standard Only

Released: 01/01/2018

Language

English

Current Revision

The IPC-6903A standard provides 62 additional terms and definitions for the design and manufacture of printed electronics. The IPC-6903A standard creates a common language and understanding for the worldwide printed electronics community.

Document #:

IPC/WHMA-A-620

Revision

Product Type

Addendum

Released: 11/28/2023

Language

English

Current Revision

IPC/WHMA-A-620E-S space addendum provides additional requirements to IPC/WHMA-A-620E standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620E-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Addendum

Released: 05/31/2022

Language

English

Current Revision

IPC/WHMA-A-620C-R rail transit addendum provides additional requirements to IPC/WHMA-A-620C standard, describing materials, methods, tests, and acceptance criteria for producing crimped, mechanically secured, and soldered interconnections. It also provides the related assembly activities associated with cable and harness assemblies in rail transit industry, to ensure the high reliability and...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 01/21/2020

Language

English

IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...

Document #:

IPC/WHMA-A-620

Revision

Original Version

Product Type

Standard Only

Released: 01/01/2012

Language

English

Current Revision

These tables are from IPC/WHMA-A-620 Revision B Chapter 19 Testing. They are provided in an electronic format that permits users to edit the tables to add user-specific criteria. These files are authorized for copying/reproduction.

Document #:

IPC-TM-650

Revision

Original Version

Product Type

Standard Only

Language

English

Current Revision

Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.

Document #:

IPC/WHMA-A-620

Revision

Product Type

Redline Standard

Released: 03/06/2023

Language

English

Current Revision

IPC/WHMA-A-620E-RL is a redline document showing the difference from IPC/WHMA-A-620D to IPC/WHMA-A-620E. IPC/WHMA-A-620E-RL provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows deleted/changed text in the IPC/WHMA-A-620D pages and new/revised text in the IPC/WHMA-A-620E pages. Due to the complexity of this document, it is only available in...

Document #:

IPC-SM-840

Revision

Product Type

Standard Only

Released: 04/30/2007

Language

English

Document #:

IPC-6903

Revision

Product Type

Standard Only

Released: 10/29/2015

Language

English

This standard provides industry-approved terms and definitions to create a common language for users and suppliers to develop electronics products that utilize printed electronics alone or as additive processes combined with traditional rigid, flexible and rigid-flex PWB assemblies Released October 2015.

Document #:

IPC-CC-830

Revision

Product Type

Standard with amendment(s)

Released: 10/23/2008

Language

English

This is the industry standard for qualification and quality conformance of conformal coating. Its intent is to show how to obtain maximum information with minimum test redundancy. Includes requirements and evaluations of material properties using standardized test vehicles. Amendment 1 updates include new qualification, retention and conformance inspection requirements for FTIR, MIR and hydrolytic...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 10/02/2017

Language

English

This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 10/30/2012

Language

English

Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 06/17/2020

Language

French

Current Revision

IPC/WHMA-A-620D est la seule norme consensuelle de l’industrie pour les exigences et l’acceptation des assemblages de câbles et de faisceaux de fils. IPC/WHMA-A-620D décrit les matériaux, les méthodes, les tests et les critères d’acceptation pour la production d’ensembles interconnectés brasés, sertis et mécaniquement sécurisés, ainsi que les activités d’assemblage qui y sont associées pour...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 11/20/2020

Language

Danish

Current Revision

IPC/WHMA-A-620D er den eneste industriudviklede standard for ” Godkendelseskrav for kabler og for produkter med wire harness”. IPC/WHMA-A-620D beskriver materialer, metoder, test og godkendelseskriterier for fremstilling af crimpede samlinger, mekanisk sikrede og loddede forbindelser samt de tilhørende monteringsprocesser som er forbundet med kabel og harness produkter. IPC/WHMA-A-620D blev...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 06/17/2020

Language

Spanish

Current Revision

El IPC/WHMA-A-620D es el único estándar consensuado por el sector sobre Requisitos y aceptabilidad de ensambles de cables y mazos de cables. El estándar IPC/WHMA-A-620D describe los materiales, métodos, pruebas y criterios de aceptabilidad para la producción de interconexiones crimpadas, mecánicamente aseguradas o soldadas y las actividades de ensamble relacionadas que estén asociadas con...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 07/13/2023

Language

Japanese

Current Revision

IPC/WHMA-A-620Eは、ケーブルおよびワイヤーハーネス組立品の要求事項および許容基準に関する、唯一の業界合意文書(規格書)である。IPC/WHMA-A-620Eでは、ケーブルおよびハーネス組立品に関係する配線の圧着、機械的固定、またははんだ付を行うための材料、方法、試験、および許容基準、ならびに関連組立活動について説明している。 IPC/WHMA-A-620Eは、IPCおよびThe Wire Harness Manufacturers Association (WHMA) (IPCの関連団体)により作成されたものである。

Document #:

IPC/WHMA-A-620

Revision

Product Type

Addendum with amendment(s)

Released: 06/01/2012

Language

English

Space Applications Electronic Hardware Addendum to IPC/WHMA-A-620A. When specifically required by procurement documentation, this Addendum supplements or replaces specifically identified requirements of IPC/WHMA-A-620, Revision A.