Menu
Close
Contact IPC

Standards

Your results

Document #

Language

Products

IPC-9704 - Revision A - Standard Only

Printed Circuit Assembly Strain Gage Test Guideline

Document #:
IPC/JEDEC-9704
Revision
A
Product Type
Standard Only
Released:  02/03/2012
Language
English
Current Revision
Strain gage testing allows for objective analysis of the strain and strain rate levels to which a surface mount package may be subjected to during assembly, test and operation. Excessive strain can result in various failure modes for different solder alloys, package types, surface finishes or laminate materials. This document describes specific guidelines for strain gage testing during the printed...
no-image-available

IPC-QL-653 - Revision A - Standard Only

Certification of Facilities that Inspect/Test Printed Boards, Components & Materials

Document #:
IPC-QL-653
Revision
A
Product Type
Standard Only
Released:  11/01/1997
Language
English
Current Revision
This specification establishes the certification requirements for facilities that inspect/test printed boards, components and materials. This specification is intended to provide a minimum standardized basis for evaluating or auditing a technically oriented inspection/testing facility. Revised November 1997. 15 pages.

IPC-7094 - Revision A - Standard Only

Design and Assembly Process Implementation for Flip Chip and Die-Size Components

Document #:
IPC-7094
Revision
A
Product Type
Standard Only
Released:  02/14/2018
Language
English
Current Revision
IPC-7094A describes the design and assembly challenges for implementing flip chip technology in a direct chip attach (DCA) assembly. The effect of bare-die or die-size components in a flip chip format has an impact on component characteristics and dictates the appropriate assembly methodology. The IPC-7094A standard focuses on design, assembly methodology, critical inspection, repair and...

IPC-9201 - Revision A - Standard Only

Surface Insulation Resistance Handbook

Document #:
IPC-9201
Revision
A
Product Type
Standard Only
Released:  09/19/2007
Language
English
Current Revision
Surface Insulation Resistance (SIR) testing is a tool used not only for characterization testing of production processes such as solder masks, soldering flux, and conformal coatings, but also for examining the electrochemical reactions at each stage of the electronic assembly production process. This handbook covers the terminology, theories, test procedures and test vehicles of SIR testing...
no-image-available

IPC/JEDEC-J-STD-609 - Revision B - Standard Only

Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-Free) and Other Attributes

Document #:
IPC/JEDEC-J-STD-609
Revision
B
Product Type
Standard Only
Released:  11/01/2016
Language
English
Current Revision
This standard provides a marking and labeling system that aids in assembly, rework, repair and recycling and provides for the identification of: those assemblies that are assembled with lead-containing or lead-free solder; components that have lead-containing or lead-free second level interconnect terminal finishes and materials; the maximum component temperature not to be exceeded during assembly...
IPC-6012E-AM1 Cover Image

IPC-6012 - Revision E - Amendment 1

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Amendment
Released:  04/20/2022
Language
English
Current Revision
IPC-6012E-AM1 is an Amendent to the IPC-6012E that clarifes the distinction between receding and dewetting solder in reflowed SPb or HASL coatings. The Amendment also provides amended criteria for minimum external conductor thickness of the finished printed board and new acceptance criteria for the minimum thickness of internal plated layers
IPC-A-610HC Cover Image

IPC-A-610 - Revision H - Addendum - Telecom

Telecom Addendum to IPC-A-610 Revision H Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
H
Product Type
Addendum
Released:  04/27/2023
Language
English
Current Revision
The IPC-A-610HC Telecom Addendum to IPC-A-610H Acceptability of Electronic Assemblies provides specific requirements for telecommunications products when it is specifically required by procurement documentation. Information in this document either supplements or replaces specifically identified requirements of IPC-A-610 Revision H by providing additional requirements to ensure that electrical and...
IPC-6012EA Cover Image

IPC-6012 - Revision E - Addendum - Automotive

Automotive Applications Addendum to IPC-6012E Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  11/30/2021
Language
English
Current Revision
The IPC-6012EA Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012 revision E, for rigid printed boards that must survive the vibration and thermal cycling environments of electronic interconnects within the automotive industry. The addendum includes updated requirements for lifted lands, pattern feature accuracy...
IPC-A-620E Space Cover Image

IPC/WHMA-A-620 - Revision E - Addendum - Space and Military

Space and Military Applications Electronic Hardware Addendum to IPC/WHMA-A-620

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Addendum
Released:  11/28/2023
Language
English
Current Revision
IPC/WHMA-A-620E-S space addendum provides additional requirements to IPC/WHMA-A-620E standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620E-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...

IPC-6012 - Revision E - Addendum - Medical

Medical Applications Addendum to IPC-6012E Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
E
Product Type
Addendum
Released:  09/10/2020
Language
English
Current Revision
The IPC-6012EM Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012E, for rigid printed boards that must meet requirements to high reliability medical device applications. IPC-6012EM is the only global industry-consensus standard for Medical Applications to Qualification and Performance Specifications for Rigid...
no-image-available

IPC-6012 - Revision F - Addendum - Space and Military

Space and Military Avionics Applications Addendum to IPC-6012F, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
F
Product Type
Addendum
Released:  02/23/2024
Language
English
Current Revision
The IPC-6012FS space addendum provides exceptions to IPC Performance Class 3 requirements of the IPC-6012F for use in space and military avionics product. Exceptions include changes to acceptance criteria and/or sample size and test frequency for production lot acceptance testing. The IPC-6012FS covers requirements for rigid printed boards to survive vibration, extreme thermal cycling and ground...
no-image-available

IPC-6013 - Revision E - Addendum - Medical

Medical Applications Addendum to IPC-6013E Qualification and Performance Specification for Flexible/Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
E
Product Type
Addendum
Released:  04/12/2022
Language
English
Current Revision
The IPC-6013EM Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6013E, for flexible/rigid-flexible printed boards that must meet requirements to high reliability medical device applications. IPC-6013EM is the only global industry-consensus standard addendum for Medical Applications to Qualification and Performance...

IPC-T-50 - Revision M - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  05/26/2015
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...
no-image-available

IPC-A-610 - Revision G - Addendum - Rail Transit

Rail Transit Addendum to IPC-A-610G Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
G
Product Type
Addendum
Released:  05/31/2022
Language
English
Current Revision
IPC-A-610G-R rail transit addendum provides additional requirements to IPC-A-610G base standard, specifying a standardized set of acceptance criteria unique to electronic assemblies used in the rigorous micro-environment under high mechanical and environmental stresses associated with high railway equipment, to ensure industry-specific high reliability and environmental adaptability of electronic...

IPC-T-50 - Revision K - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  07/17/2013
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...

IPC-A-610 - Revision H - Standard Only

Acceptability of Electronic Assemblies

Document #:
IPC-A-610
Revision
H
Product Type
Standard Only
Released:  10/07/2020
Language
English
IPC-A-610H is the most widely used electronics assembly acceptance standard in the electronics industry. IPC-A-610H standard includes a general update to the document, introduces several new surface mount component types and removes target conditions. Participants from 29 countries provided their input and expertise to bring this document to the electronics industry. This is a must-have for...
IPC-A-610J - Cover Image

IPC-A-610 - Revision J - Redline Standard

Acceptability for Electronic Assemblies

Document #:
IPC-A-610
Revision
J
Product Type
Redline Standard
Released:  04/11/2024
Language
English
Current Revision
IPC-A-610H to IPC-A-610J redline document shows the changes from IPC-A-610H to IPC-A-610J in a side-by-side comparison of the two documents. The IPC-A-610J redline is only available in electronic format, it is not available in hardcopy. As a comparison document it does not replace the standard.
no-image-available

IPC/WHMA-A-620 - Revision C - Addendum - Rail Transit

Rail Transit Addendum to IPC/WHMA-A-620C

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Addendum
Released:  05/31/2022
Language
English
Current Revision
IPC/WHMA-A-620C-R rail transit addendum provides additional requirements to IPC/WHMA-A-620C standard, describing materials, methods, tests, and acceptance criteria for producing crimped, mechanically secured, and soldered interconnections. It also provides the related assembly activities associated with cable and harness assemblies in rail transit industry, to ensure the high reliability and...
no-image-available

IPC-A-610 - Revision H - Redline Standard

Acceptability of Electronic Assemblies - Redline

Document #:
IPC-A-610
Revision
H
Product Type
Redline Standard
Released:  10/07/2020
Language
English
Current Revision
IPC-A-610H Redline document shows the changes from IPC-A-610G to IPC-A-610H in a side-by-side comparison of the two documents. The IPC-A-610H redline is only available in electronic format, it is not available in hardcopy
no-image-available

IPC-T-50 - Revision J - Standard Only

SUPERSEDED BY T-50K

Document #:
IPC-T-50
Revision
J
Product Type
Standard Only
Released:  10/18/2011
Language
English
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...
26-50 of 413

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-8401: Guidelines for In-Mold Electronics

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly