Menu
Close
Contact IPC

Standards

Your results

Document #

Language

Products

IPC-T-50N Cover Image

IPC-T-50 - Revision N - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  11/30/2021
Language
English
Current Revision
IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...
IPC-WHMA-A-620E Cover Image

IPC/WHMA-A-620 - Revision E - Standard Only

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Standard Only
Released:  10/19/2022
Language
English
Current Revision
IPC/WHMA-A-620E is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620E describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620E was developed by IPC and...
no-image-available

IPC-7711/21 - Revision D - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
D
Product Type
Standard Only
Released:  02/06/2024
Language
English
Current Revision
The IPC-7711/21 guide provides procedures for rework, repair and modification of printed board assemblies, including tools and materials, common procedures, coating removal and graphics to assist the user.
IPC-D-620A Cover Image

IPC-D-620 - Revision A - Standard Only

Design and Critical Process Requirements for Cable and Wiring Harnesses

Document #:
IPC-D-620
Revision
A
Product Type
Standard Only
Released:  02/28/2022
Language
English
Current Revision
The IPC-D-620A standard provides design and critical process requirements for cable and wire harness assemblies as well as military/space applications. IPC-D-620A is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum. Three white papers are included to provide guidance on key topics discussed...
IPC-A-620E Space Cover Image

IPC/WHMA-A-620 - Revision E - Addendum - Space and Military

Space and Military Applications Electronic Hardware Addendum to IPC/WHMA-A-620

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Addendum
Released:  11/28/2023
Language
English
Current Revision
IPC/WHMA-A-620E-S space addendum provides additional requirements to IPC/WHMA-A-620E standard to ensure the reliability of cable and wire harness assemblies that must survive the vibration and thermal excursions encountered getting to and operating in the military and space environments. IPC/WHMA-A-620E-S cannot be used as a standalone document. It must be used with the base standard IPC/WHMA-A...

IPC-T-50 - Revision M - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  05/26/2015
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...

IPC-T-50 - Revision K - Standard Only

Terms and Definitions for Interconnecting and Packaging Electronic Circuits

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  07/17/2013
Language
English
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...
no-image-available

IPC/WHMA-A-620 - Revision C - Addendum - Rail Transit

Rail Transit Addendum to IPC/WHMA-A-620C

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Addendum
Released:  05/31/2022
Language
English
Current Revision
IPC/WHMA-A-620C-R rail transit addendum provides additional requirements to IPC/WHMA-A-620C standard, describing materials, methods, tests, and acceptance criteria for producing crimped, mechanically secured, and soldered interconnections. It also provides the related assembly activities associated with cable and harness assemblies in rail transit industry, to ensure the high reliability and...
no-image-available

IPC-T-50 - Revision J - Standard Only

SUPERSEDED BY T-50K

Document #:
IPC-T-50
Revision
J
Product Type
Standard Only
Released:  10/18/2011
Language
English
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...

IPC/WHMA-A-620 - Revision D - Standard Only

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  01/21/2020
Language
English
IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...
no-image-available

IPC/WHMA-A-620 - Standard Only

IPC/WHMA-A-620 Test Data Tables

Document #:
IPC/WHMA-A-620
Revision
Original Version
Product Type
Standard Only
Released:  01/01/2012
Language
English
Current Revision
These tables are from IPC/WHMA-A-620 Revision B Chapter 19 Testing. They are provided in an electronic format that permits users to edit the tables to add user-specific criteria. These files are authorized for copying/reproduction.
no-image-available

IPC/WHMA-A-620 - Revision E - Redline Standard

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
E
Product Type
Redline Standard
Released:  03/06/2023
Language
English
Current Revision
IPC/WHMA-A-620E-RL is a redline document showing the difference from IPC/WHMA-A-620D to IPC/WHMA-A-620E. IPC/WHMA-A-620E-RL provides a side-by-side comparison of the two documents and includes the figures and tables. The document shows deleted/changed text in the IPC/WHMA-A-620D pages and new/revised text in the IPC/WHMA-A-620E pages. Due to the complexity of this document, it is only available in...

IPC-7711/21 - Revision C - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
C
Product Type
Standard Only
Released:  02/01/2017
Language
English
This guide provides procedures for rework, repair and modification of printed board assemblies. Included in this revision are the procedures previously released as change pages, an updated general information and common procedures section, new procedures for BGAs using focused IR Reflow Systems with integral preheater and general updates to all other procedures.

IPC-T-50 - Revision M - Standard Only

Termes et Définitions pour les Circuits Électroniques Imprimés et Assemblés

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  06/30/2015
Language
French
Current Revision
Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...
no-image-available

IPC/WHMA-A-620 - Revision C - Standard Only

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Standard Only
Released:  10/02/2017
Language
English
This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...
no-image-available

IPC-D-620 - Revision A - Standard Only

Design and Critical Process Requirements for Cable and Wiring Harnesses

Document #:
IPC-D-620
Revision
A
Product Type
Standard Only
Language
English
The IPC-D-620A standard provides design and critical process requirements for cable and wire harness assemblies as well as military/space applications. IPC-D-620A is the design requirements companion to IPC/WHMA-A-620, "Requirements and Acceptance for Cable and Wire Harness Assemblies," and its associated Space Addendum. Three white papers are included to provide guidance on key topics discussed...
no-image-available

IPC-T-50 - Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

IPC-T-50 - Revision K - Standard Only

Begriffe und Definitionen für Leiterplatten und elektronische Baugruppen

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  02/03/2015
Language
German
Current Revision
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...
no-image-available

IPC-A-620 - Revision B - Standard Only

Requirements and Acceptance for Cable and Wire Harness Assemblies

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  10/30/2012
Language
English
Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...

IPC-7711/21 - Revision B - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  11/30/2007
Language
English
This guide includes everything needed for repair and rework of electronic assemblies and printed circuit boards. IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new...

IPC/WHMA-A-620 - Revision D - Standard Only

Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  06/17/2020
Language
German
Current Revision
IPC/WHMA-A-620D ist die einzige, im Branchenkonsens entwickelte Richtlinie für Anforderungen und Abnahmekriterien für Kabel- und Kabelbaum-Baugruppen. IPC/WHMA-A-620D beschreibt Materialien, Methoden, Tests und Abnahmekriterien für die Herstellung gecrimpter, mechanisch gesicherter oder gelöteter Verbindungen und die zu den Kabel- und Kabelbaum-Baugruppen zugehörigen Montageaktivitäten. IPC/WHMA-A...
no-image-available

IPC/WHMA-A-620 - Revision D - Standard Only

Requisitos y admisibilidad de ensambles con cables y mazos de cables

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Standard Only
Released:  06/17/2020
Language
Spanish
Current Revision
El IPC/WHMA-A-620D es el único estándar consensuado por el sector sobre Requisitos y aceptabilidad de ensambles de cables y mazos de cables. El estándar IPC/WHMA-A-620D describe los materiales, métodos, pruebas y criterios de aceptabilidad para la producción de interconexiones crimpadas, mecánicamente aseguradas o soldadas y las actividades de ensamble relacionadas que estén asociadas con...
1-25 of 116

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

J-STD-005B: Requirements for Soldering Pastes

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

J-STD-004D: Requirements for Soldering Fluxes

IPC-4413: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly