Standards

Your results

Products

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 10/18/2011

Language

English

This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...

Document #:

IPC-2228

Revision

Original Version

Product Type

Standard Only

Released: 10/17/2022

Language

English

Current Revision

The IPC-2228 standard establishes the specific requirements for the design of rigid, flexible and rigid-flexible printed boards utilizing radio frequency (RF) and/or Microwave circuity and/or high frequency laminates where RF transmission lines and related passive metal layers are considered as distributed circuits, instead of conventional lumped circuit elements. The IPC-2228 standard is used to...

Document #:

IPC-1602

Revision

Original Version

Product Type

Standard Only

Released: 04/07/2020

Language

English

Current Revision

The IPC-1602 standard provides requirements intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging materials types and methods, production environment, handling and transport of product, and establishing baking profiles for moisture removal. IPC-1602 is now providing requirements that can be called...

Document #:

IPC-TM-650

Revision

Original Version

Product Type

Standard Only

Language

English

Current Revision

Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.

Document #:

IPC-2615

Revision

Original Version

Product Type

Standard Only

Released: 07/01/2000

Language

English

Current Revision

The definitive standard on printed board dimensioning and tolerancing is finally here! IPC-2615 comprehensively covers dimensioning and tolerancing of electronic packaging and is consistent with other IPC printed board standards such as IPC-6012A and IPC-2221A. The document includes fundamental dimensioning and tolerancing rules, positional, profile, orientation and form tolerances and detailed...

Document #:

IPC-9191

Revision

Original Version

Product Type

Standard Only

Released: 11/01/1999

Language

English

Current Revision

IPC-9191 reflects the principals of statistical process control (SPC) represented by ISO/DIS 11462-1, Guidelines for Implementation of Statistical Process Control (SPC) -- Part 1: Elements of SPC. This document outlines the SPC philosophy, implementation strategies, tools, and techniques used for relating process control and capability to final product requirements. Supersedes IPC-PC-90.

Document #:

IPC-5262

Revision

Original Version

Product Type

Standard Only

Released: 10/17/2022

Language

English

Current Revision

The IPC-5262 prescribes the minimum design, critical process and acceptance requirements for the application of polymeric materials to electrical/electronic components, modules, printed wiring assemblies and other elements thereof. The intent of IPC-5262 is to establish a baseline of requirements, procedures, practices and process attributes based on lessons learned and best practices that have...

Document #:

IPC-4104

Revision

Original Version

Product Type

Standard Only

Released: 05/01/1999

Language

English

Current Revision

Covers the various conductive and dielectric materials that can be used for the fabrication of HDI and microvias. The 23 specification sheets included in IPC/JPCA-4104 cover the qualification and conformance requirements for such materials as photoimageable dielectric dry films and liquids, epoxy blends and coated foils. IPC/JPCA-4104 also includes six new test methods developed specifically for...

Document #:

IPC-4555

Revision

Original Version

Product Type

Standard Only

Released: 05/31/2022

Language

English

Current Revision

The IPC-4555 standard covers the requirements and testing for organic solderability preservatives (OSP) processes for printed boards to be used primarily for electrical and electronic circuits. Details for lead free soldering are covered in IPC-4555

Document #:

IPC-SMEMA 7

Revision

Original Version

Product Type

Standard Only

Released: 02/12/2007

Language

English

Current Revision

This document is intended to clarify terms used in the area of fluid dispensing. As is often the case, different terms are used by different manufacturers to convey a similar meaning. Common interchangeable terms are shown in parenthesis and the reader should not infer one term is preferred over the other.

Document #:

IPC-6012

Revision

Product Type

Standard Only

Released: 02/20/2020

Language

English

IPC-6012E specification covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical...

Document #:

IPC-5704

Revision

Original Version

Product Type

Standard Only

Released: 01/27/2010

Language

English

Current Revision

Printed board quality encompasses many parameters, cleanliness being one important parameter. This document defines the recommended general requirements for the cleanliness of unpopulated (bare) single, double-sided and multilayer printed boards. Coverage is given to Ion Chromatography (IC) testing and Ionic cleanliness testing for process control. 6 pages. Released December 2009.

Document #:

IPC-2251

Revision

Original Version

Product Type

Standard Only

Released: 11/01/2003

Language

English

Current Revision

This guideline addresses the major factors influencing the design of high-speed circuitry. Considerations include electrical noise, electromagnetic interference, signal propagation time, impedance, thermo-mechanical environmental protection, and heat dissipation. Supersedes IPC-D-317A. Key improvements over the IPC-D-317A document include updated impedance models for embedded microstrip, centered...

Document #:

IPC-2612

Revision

Original Version

Product Type

Standard Only

Released: 04/30/2010

Language

English

Current Revision

This standard establishes the requirements for the documentation of electronic diagrams used as the foundation for defining the electrical interconnectivity of electronic products. The description pertains to either schematic diagrams, logic diagrams or Boolean truth tables and includes methodology for defining circuit flow, electrical or functional restrictions, or maintenance test procedures...

Document #:

IPC-6011

Revision

Original Version

Product Type

Standard Only

Released: 07/01/1996

Language

English

Current Revision

This specification establishes the general requirements and responsibilities for suppliers and users of printed boards. Serving as the foundation for the IPC-6010 Board Performance Documents series, it describes quality and reliability assurance requirements that must be met. For use with IPC-6012 through IPC-6018. Supersedes IPC-RB-276, IPC-SC-320, IPC-TC-500, IPC-ML-950C. 15 pages. Released July...

Document #:

IPC-4413

Revision

Original Version

Product Type

Standard Only

Released: 05/01/2024

Language

English

Current Revision

IPC-4413 standard covers finished fabrics woven from low Dk electrical grade glass fiber yarns that are intended as a reinforcing material in laminated plastics for electrical and electronic use. All fabrics covered by IPC-4413 standard are plain weave.

Document #:

IPC-2612-1

Revision

Original Version

Product Type

Standard Only

Released: 04/30/2010

Language

English

Current Revision

This standard establishes the requirements for generation of electronic symbols used in the documentation of electronic diagrams that define the electrical interconnectivity of electronic products. The descriptions pertain to schematic symbols, logic symbols or Boolean truth tables required to define the circuit configuration. Where appropriate, the standard also includes methodology for defining...

Document #:

IPC-6012

Revision

Product Type

Redline Standard

Released: 10/09/2023

Language

English

Current Revision

IPC-6012F Redline document shows the changes from IPC-6012E to IPC-6012F in a side-by-side comparison of the two documents. The IPC-6012F redline is available in both electronic and hardcopy format.

Document #:

IPC-D-279

Revision

Original Version

Product Type

Standard Only

Released: 07/01/1996

Language

English

Current Revision

Establishes design concepts, guidelines and procedures for reliable printed wiring assemblies. Focuses on SMT or mixed technology PWAs, specifically addressing the interconnect structure and the solder joint itself. Discusses substrates, components, attachment materials, coatings and assembly processes and testing considerations. In addition, this document contains detailed appendices covering...

Document #:

IPC-TF-870

Revision

Original Version

Product Type

Standard Only

Released: 11/01/1989

Language

English

Current Revision

Covers the materials, qualification, certification and performance requirements for multilayer polymer thick film (PTF) printed, extrusion deposited, or otherwise applied conductor, insulator and through-hole technology. This specification may also be used for procurement of single and double-sided boards. 59 pages. Released November 1989.

Document #:

IPC-1331

Revision

Original Version

Product Type

Standard Only

Released: 03/01/2000

Language

English

Current Revision

This voluntary standard establishes minimum requirements for the design, installation, operation and maintenance of electrically heated process equipment in order to minimize electrical hazards and prevent fires that may occur in combustible tanks, tank liners and drying equipment.

Document #:

IPC-2225

Revision

Original Version

Product Type

Standard Only

Released: 05/01/1998

Language

English

Current Revision

Used in conjunction with IPC-2221A, IPC-2225 establishes the requirements and other considerations (thermal, electrical, electromechanical and mechanical) for the design of Single Chip Module (SCM-L), MCM or MCM-L assemblies. Key concepts include adhesive interconnection information, typical die attach materials, microvia material properties and relationships with DFM and DFE. 44 pages. Released...

Document #:

IPC/EIA-J-STD-028

Revision

Original Version

Product Type

Standard Only

Released: 08/01/1999

Language

English

Current Revision

This standard establishes construction detail requirements for bumps and other terminal structures used for Flip Chip Scale carriers. The specific standards for different terminations are appropriately matched to a particular interconnection process and include such diverse terminations as solder bumps, columns, non-melting stand-offs and conductive polymer deposits. The document articulates a set...

Document #:

IPC-4781

Revision

Original Version

Product Type

Standard Only

Released: 05/30/2008

Language

English

Current Revision

The industry's first specification for the evaluation of a legend and/or marking ink material for the determination of acceptability of use in a standard printed board system. IPC-4781 provides coverage for adhesion, material qualification and testing, resistances to solvents, requirements for resistance to lead-free solders, and electrical requirements. 17 pages. Released May 2008.

Document #:

IPC-3408

Revision

Original Version

Product Type

Standard Only

Released: 11/01/1996

Language

English

Current Revision

This document covers requirements and test methods for anisotropically conductive adhesive films used to bond and electrically connect components. Applications include the following: flexible PWB-to-glass, flexible PWB-to-rigid PWB, flip chip-to-glass, flip chip-to-flexible PWB, flip chip-to-rigid PWB, and fine pitch SMD. The adhesive film may be supplied pre-attached to a flexible circuit or...