Products
The IPC-WP-114A white paper provides guidance to reduce and control exposure to environmental conditions and contamination that promote the development of White Plague. A template for developing a White Plague Control Plan (WPCP) is included.
The IPC-WP-116A white paper provides guidance to control and mitigate risks associated with the introduction of Foreign Object Debris (FOD) in electrical and electronic assemblies. Guidance to control and mitigate risks associated with the introduction of Foreign Object Debris (FOD) in electrical and electronic assemblies is provided. A template for developing a Foreign Object Debris (FOD) Control...
The IPC-WP-113A white paper provides guidance to reduce and control exposure to environmental conditions and contamination that promote the development of Red Plague. A template for developing a Red Plague Control Plan (RPCP) is included.
IPC-WP-023 is an IPC Technology Solutions White Paper addressing reliability issues associated with stacked microvias. There is evidence that staggering vias can result in a more robust structure; however, staggering microvias is only a temporary solution to accommodate complex designs with microvias built with weak interface structures IPC-WP-023 white paper provides an investigation of these...
The IPC-WP-026 white paper explores blockchain as an emerging technology that has a core strength in providing an immutable, auditable, transparent and secure environment for data exchanges. These advantages make it a prime candidate for implementation in the electronics industry. The IPC-WP-026 white paper explores blockchain and its limitations and challenges. It also provides a few directions...
Manufacturers of high reliability electronics have been working for many years to mitigate the deleterious effects of tin whisker formation. One highly effective means to suppress the growth of tin whiskers is to replace the pure tin plating with reflowed tin-lead solder. One approach is to fully consume the tin plating by tin-lead solder during the SMT reflow process. This phenomenon of tin...
Status of the technology discussion on the various methodologies for mounting and interconnecting active devices to a variety of substrate materials is summarized in this document. Reviews mounting techniques of tape automated bonding (TAB), chip on board (COB) and flip chip. Examinations of the most commonly used substrate options of laminate, ceramic and silicon are also reviewed. Editor: John...
"Embedded Capacitor Technology; Status, Opportunity and Challenges" was presented by John Andresakis, vice president of strategic technology, Oak-Mitsui at the IPC Conference for the PCB Industry: Critical Issues for the Military Market, Washington D.C., in December 2011.The author explains how the use of this technology improves the performance, reliability and assembly cost of printed boards and...
This technical paper covers the testing and evaluation of polymeric conformal coatings for moisture and insulation resistance (MIR) and dielectric withstanding voltage (DWV). This effort was initiated by the IPC Conformal Coating Task Group to support technical decisions for IPC coating specification CC-830 as part of the Revision C process. MIR testing was done per a modified method of IPC-TM-650...
This technical report provides full detail of the round robin study charged with assessing the use of Interconnect Stress Test (IST) as a test for incoming inspection in lieu of Thermal Stress in the detection of innerlayer separations in plated-through holes. Includes background on the Post Separation Task Group, test results, round robin test plan, conclusions and test methods used. 51 pages...
This document, co-developed by the IPC, EIA and ASTM, represents a comprehensive report on fine pitch technology with an emphasis on tape-automated bonding and design rules. Subjects include land pattern design, types of encapsulation, TAB tape format, assembly techniques and the advantages and disadvantages of FPT. 54 pages. Released by the Surface Mount Council January 1989.
Approximately 200,000 plated through-holes, covering primarily electroplated but also electroless technology, were exposed to several different thermal cycles. A number of PTH diameters, board constructions and plating thicknesses were evaluated. 80 pages. Released September 1988.
An IPC Blue Ribbon Committee originally published this study. It provides extensive background and test results resolving methods to identify visible conditions such as measles in PWBs and that measles do not impact reliability. 81 Pages. Released November 1973.
Guidance to control and mitigate risks associated with the introduction of Foreign Object Debris (FOD) in electrical and electronic assemblies is provided. A template for developing a Foreign Object Debris (FOD) Control Plan is included.
Guidance to reduce and control exposure to environmental conditions and contamination that promote the development of White Plague is provided in this document. A template for developing a White Plague Control Plan (WPCP) is included.
Coming Soon
IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)
IPC-2294: Design Standard for Printed Electronics on Rigid Substrates
IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates
J-STD-005B: Requirements for Soldering Pastes
IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards
J-STD-004D: Requirements for Soldering Fluxes
IPC-4413: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards