Menu
Close
Contact IPC

White Paper

Your results

Document #

Language

Products

IPC-WP-116A Cover Images

IPC-WP-116 - Revision A - White Paper

Guidance for the Development and Implementation of a Foreign Object Debris (FOD) Control Plan

Document #:
IPC-WP-116
Revision
A
Product Type
White Paper
Released:  03/01/2022
Language
English
Current Revision
The IPC-WP-116A white paper provides guidance to control and mitigate risks associated with the introduction of Foreign Object Debris (FOD) in electrical and electronic assemblies. Guidance to control and mitigate risks associated with the introduction of Foreign Object Debris (FOD) in electrical and electronic assemblies is provided. A template for developing a Foreign Object Debris (FOD) Control...
no-image-available

IPC-WP-001 - White Paper

Soldering Capability White Paper Report

Document #:
IPC-WP-001
Revision
Original Version
Product Type
White Paper
Released:  08/01/1991
Language
English
Current Revision
Due to a concern in the electronic packaging industry about solderability problems, Foster Gray, PC Interconnects, developed this document for the Surface Mount Council. Areas covered are: design for the soldering process; solderable PWBs; solderable components and soldering process. Five different industry perspectives provide analysis of these issues. 35 pages. Released August 1991.
no-image-available

IPC-WP-023 - White Paper

IPC Technology Solutions White Paper on Performance-Based Printed Board OEM Acceptance: The Hidden Reliability Threat

Document #:
IPC-WP-023
Revision
Original Version
Product Type
White Paper
Released:  05/01/2018
Language
English
Current Revision
IPC-WP-023 is an IPC Technology Solutions White Paper addressing reliability issues associated with stacked microvias. There is evidence that staggering vias can result in a more robust structure; however, staggering microvias is only a temporary solution to accommodate complex designs with microvias built with weak interface structures IPC-WP-023 white paper provides an investigation of these...

IPC-WP-024 - White Paper

IPC White Paper on Reliability and Washability of Smart Textile Structures – Readiness for the Market

Document #:
IPC-WP-024
Revision
Original Version
Product Type
White Paper
Released:  08/16/2018
Language
English
Current Revision
IPC-WP-024 is a white paper which discusses the issues associated with reliability of smart textiles (e-textiles structures) following multiple washing cycles and emphasizes efforts that industry and research laboratories must undertake to make e-textile structures more robust and able to be washed similarly to everyday textile products (e.g., underwear, clothing, home textiles and technical...

IPC-WP-025 - White Paper

IPC White Paper on A Framework for the Engineering and Design of E-Textiles

Document #:
IPC-WP-025
Revision
Original Version
Product Type
White Paper
Released:  04/01/2019
Language
English
Current Revision
This white paper is a benchmarking exercise of e-textile integrations, providing an introductory categorization of how the current market sector is using textile-based electrical components to achieve integrated functionality. This peer assessment provides a baseline understanding of e-textile process techniques, requirements and resources within this emerging sector.
no-image-available

IPC/PERM-WP-022 - White Paper

Mitigation of Pure Tin Risk by Tin-Lead SMT Reflow - Results of an Industry Round-Robin - Final Report

Document #:
IPC/PERM-WP-022
Revision
Original Version
Product Type
White Paper
Released:  09/05/2018
Language
English
Current Revision
Manufacturers of high reliability electronics have been working for many years to mitigate the deleterious effects of tin whisker formation. One highly effective means to suppress the growth of tin whiskers is to replace the pure tin plating with reflowed tin-lead solder. One approach is to fully consume the tin plating by tin-lead solder during the SMT reflow process. This phenomenon of tin...
no-image-available

IPC-WP-003 - White Paper

Chip Mounting Technology

Document #:
IPC-WP-003
Revision
Original Version
Product Type
White Paper
Released:  08/01/1993
Language
English
Current Revision
Status of the technology discussion on the various methodologies for mounting and interconnecting active devices to a variety of substrate materials is summarized in this document. Reviews mounting techniques of tape automated bonding (TAB), chip on board (COB) and flip chip. Examinations of the most commonly used substrate options of laminate, ceramic and silicon are also reviewed. Editor: John...
no-image-available

IPC-COMPTRACE-609 - White Paper

What You Can Do About Component Traceability

Document #:
IPC-CT
Revision
Original Version
Product Type
White Paper
Released:  07/07/2009
Language
English
Current Revision
The problem of counterfeit components continues to escalate. It is no longer limited to high value items like semiconductors. It can include connectors, resistors, passive components or anything that is in demand. What more could you be doing to ensure that the components you purchase are genuine? What can you do about component traceability? Jack Stradley, Manager, Business Development &...
no-image-available

IPC-WP-024 - White Paper

IPC 智能织物结构的可靠性和可洗性白皮书——为市场做好准备

Document #:
IPC-WP-024
Revision
Original Version
Product Type
White Paper
Released:  04/16/2019
Language
Chinese
Current Revision
IPC-WP-024是一份白皮书，讨论了多次洗涤循环后智能织物（电子织物结构）可靠性相关的问题，并强调了工业和研究实验室必须做出的努力。以使电子织物结构更加坚固，能够像市场上的日常织物（例如，内衣、服装、家用织物和技术织物）一样被清洁或洗涤。 研究人员在商用洗衣机和家用洗衣机洗涤剂多次洗涤循环后，为电子织物提供实验室测试的初始可靠性结论。
1-10 of 10

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

J-STD-005B: Requirements for Soldering Pastes

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

J-STD-004D: Requirements for Soldering Fluxes

IPC-4413: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly