Products
Controlled impedance is the maintenance of some specified tolerance in the characteristic impedance of an interconnect line (transmission line) that is used to connect different devices on a circuit. Controlled impedance is often a design consideration for high-speed digital or high-frequency analog circuits. This guide is intended to be used by circuit designers, packaging engineers, printed...
This specification sets requirements based on performance criteria for the use of Immersion Silver (IAg) as a surface finish for printed circuit boards. It is intended for use by chemical suppliers, printed board manufacturers, electronics manufacturing services (EMS) companies and original equipment manufacturers (OEM). IAg is a thin immersion deposit over copper. It is a multifunctional surface...
UPDATED! This standard describes a data format for transmitting bare board electrical test information in digital form, including data suitable for computer-aided repair. When used as a netlist input to test data processing, the receiver of IPC-D-356B data will determine test point assignments and positioning. Enhancements to the B Revision include updates to the concept of testable areas to...
The IPC-9202A, Material and Process Characterization/Qualification Test Protocol that records changes in Surface Insulation Resistance (SIR) on a representative sample of a printed circuit assembly (PCA). It quantifies any deleterious effects that might arise from solder flux or other process residues left on external surfaces after soldering, which can cause unwanted electro-chemical reactions...
The IPC-2581C standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most...
The IPC-6903A standard provides 62 additional terms and definitions for the design and manufacture of printed electronics. The IPC-6903A standard creates a common language and understanding for the worldwide printed electronics community.
The IPC-1401A standard specifies the requirements and best practice guidelines for an effective corporate social responsibility (CSR) management system to help an enterprise integrate CSR as a customer requirement into products and value chain activities, as well as to identify and manage CSR risks and opportunities through cooperation with customers and suppliers, to enhance the competitive...
Surface Insulation Resistance (SIR) testing is a tool used not only for characterization testing of production processes such as solder masks, soldering flux, and conformal coatings, but also for examining the electrochemical reactions at each stage of the electronic assembly production process. This handbook covers the terminology, theories, test procedures and test vehicles of SIR testing...
This document is a general overview of computer aided design and its processes, techniques, considerations and problem areas with respect to printed circuit design. Describes the CAD design process from initial input package requirements to engineering change. 44 pages. Revised February 1988.
This document provides manufacturing and design considerations, input data requirements, test coupons, process control, tape and preform artwork, cut and strip artwork, vector photoplotting, rasterplotting, direct imaging, measurement and quality assurance. 68 pages. Revised June 1991.
This is the document all process engineers must have! Useful for day-to-day problem solving, it contains case histories of problems and corrective action in the design, manufacture, assembly and testing of printed wiring products. Each section has been updated to reflect today's manufacturing challenges. Sections address documentation, phototooling, raw materials, mechanical operations, hole...
Covers the requirements for copper/invar/copper (CIC), copper/molybdenum/ copper (CMC) and three-layer composites for use in electronic applications.
Establishes nomenclature and requirements for solid carbide twist drills with four-faceted drill points used in the fabrication of printed boards. 9 pages. Revised April 1994.
This specification establishes the qualification and performance requirements for encapsulated discrete wire interconnection boards with wires that terminate in plated holes. 62 pages. Revised May 1990.
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision M contains over 220 new or revised terms, including new terminology for conformal coatings, potting and encapsulation processes, stencil design, statistical process control, and flexible printed board...
This essential industry standard provides descriptions and illustrations of electronic interconnect industry terminology to help users and their customers break down language barriers. Revision K contains more than 220 new or revised terms, including new terminology for thermal properties, etchback, assembly processing, hole drilling, and microvia technology. Also includes commonly used industry...
This essential industry standard provides descriptions and illustrations of electronics interconnect industry terminology to help users and their customers break down language barriers. Revision J contains nearly 400 new or revised terms, including new terminology for chip scale and area array packaging, cable and wire harness technology, assembly processing, moisture sensitive components, and...
IPC-A-610 is the most widely used electronics assembly acceptance document. Updated with participants from 17 countries providing input and expertise, this document brings the latest criteria along with many new and revised graphics to the industry. This is a must-have for inspectors, operators and others with an interest in the acceptance criteria for electronic assemblies. IPC-A-610 is developed...
The IPC-1602 standard provides requirements intended to protect printed boards from contamination, physical damage, solderability degradation and moisture uptake. Consideration is given to packaging materials types and methods, production environment, handling and transport of product, and establishing baking profiles for moisture removal. IPC-1602 is now providing requirements that can be called...
This standard establishes the requirements for the documentation of electronic diagrams used as the foundation for defining the electrical interconnectivity of electronic products. The description pertains to either schematic diagrams, logic diagrams or Boolean truth tables and includes methodology for defining circuit flow, electrical or functional restrictions, or maintenance test procedures...
The IPC-5262 prescribes the minimum design, critical process and acceptance requirements for the application of polymeric materials to electrical/electronic components, modules, printed wiring assemblies and other elements thereof. The intent of IPC-5262 is to establish a baseline of requirements, procedures, practices and process attributes based on lessons learned and best practices that have...
This standard establishes the generic requirements for a document set describing electronic products, and the methodology used for revision control and configuration management of the information. The generic descriptions apply to the entire document set and are used to define and maintain the electronic product. The methodology permits different grades of completeness of the documentation, as...
This standard establishes the requirements for generation of electronic symbols used in the documentation of electronic diagrams that define the electrical interconnectivity of electronic products. The descriptions pertain to schematic symbols, logic symbols or Boolean truth tables required to define the circuit configuration. Where appropriate, the standard also includes methodology for defining...
Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.
This guideline addresses the major factors influencing the design of high-speed circuitry. Considerations include electrical noise, electromagnetic interference, signal propagation time, impedance, thermo-mechanical environmental protection, and heat dissipation. Supersedes IPC-D-317A. Key improvements over the IPC-D-317A document include updated impedance models for embedded microstrip, centered...
Coming Soon
IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)
IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)
IPC-2294: Design Standard for Printed Electronics on Rigid Substrates
IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates
IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards