Menu
Close
Contact IPC

Study/Technical Report

Your results

Document #

Language

Products

no-image-available

IPC-TR-587 - Standard Only

Conformal Coating Material and Application ‘‘State of the Industry’’ Assessment Report

Document #:
IPC-TR-587
Revision
Original Version
Product Type
Study/Technical Report
Released:  08/04/2020
Language
English
Current Revision
IPC-TR-587 technical report delivers results of a major study on conformal coating. In most manufacturing specifications, conformal coating thickness is defined as the thickness of the final polymer film on a flat, unencumbered surface of the assembly, however conformal coating thickness on other assembly and component surfaces is not characterized. IPC-TR-587 is a report outlining an IPC study of...

IPC-TR-486 - Study/Report

Report on Round Robin Study to Correlate Interconnect Stress Test (IST) with Thermal Stress/Microsectioning Evaluations for Detecting the Presence of Inner-layer Separations

Document #:
IPC-TR-486
Revision
Original Version
Product Type
Study/Technical Report
Released:  07/01/2001
Language
English
Current Revision
This technical report provides full detail of the round robin study charged with assessing the use of Interconnect Stress Test (IST) as a test for incoming inspection in lieu of Thermal Stress in the detection of innerlayer separations in plated-through holes. Includes background on the Post Separation Task Group, test results, round robin test plan, conclusions and test methods used. 51 pages...
no-image-available

IPC-TR-465-3 - Study/Report

Evaluation of Steam Aging on Alternative Finishes, Phase 11A

Document #:
IPC-TR-465
Revision
Original Version
Product Type
Study/Technical Report
Released:  07/01/1996
Language
English
Current Revision
Details the results of a two-year study to determine the effect of steam aging exposure on components. A variety of solderable finishes were used. A small production simulation utilized preconditioned and as-received samples and tested a total of 2,000 joints. 15 pages. Released July 1996.
no-image-available

IPC-TR-001 - Study/Report

An Introduction to Tape Automated Bonding Fine Pitch Technology

Document #:
IPC-TR-001
Revision
Original Version
Product Type
Study/Technical Report
Released:  01/01/2006
Language
English
Current Revision
This document, co-developed by the IPC, EIA and ASTM, represents a comprehensive report on fine pitch technology with an emphasis on tape-automated bonding and design rules. Subjects include land pattern design, types of encapsulation, TAB tape format, assembly techniques and the advantages and disadvantages of FPT. 54 pages. Released by the Surface Mount Council January 1989.
no-image-available

IPC-TR-467 - Study/Report

Supporting Data and Numerical Examples for ANSI/J-STD-001B APPENDIX D (Control of Fluxes)

Document #:
IPC-TR-467
Revision
Original Version
Product Type
Study/Technical Report
Released:  10/01/1996
Language
English
Current Revision
This addendum to J-STD-001, originally developed for Revision B but also applicable to Revision C, proposes solutions for cost-effective testing and increased implementation. Also covers other assembly test methods that are not addressed in J-STD-001. 12 pages. Released October 1996. Now available in electronic format.

IPC-TR-579 - Study/Report

Round Robin Reliability Evaluation of Small Diameter Plated Through Holes in PWBs

Document #:
IPC-TR-579
Revision
Original Version
Product Type
Study/Technical Report
Released:  09/01/1988
Language
English
Current Revision
Approximately 200,000 plated through-holes, covering primarily electroplated but also electroless technology, were exposed to several different thermal cycles. A number of PTH diameters, board constructions and plating thicknesses were evaluated. 80 pages. Released September 1988.
no-image-available

IPC-TR-549 - Study/Report

Measles in Printed Wiring Boards

Document #:
IPC-TR-549
Revision
Original Version
Product Type
Study/Technical Report
Released:  12/02/2014
Language
English
Current Revision
An IPC Blue Ribbon Committee originally published this study. It provides extensive background and test results resolving methods to identify visible conditions such as measles in PWBs and that measles do not impact reliability. 81 Pages. Released November 1973.
no-image-available

IPC-TR-587 - Standard Only

Conformal Coating Material and Application ‘‘State of the Industry’’ Assessment Report

Document #:
IPC-TR-587
Revision
Original Version
Product Type
Study/Technical Report
Language
English
Current Revision
IPC-TR-587 technical report delivers results of a major study on conformal coating. In most manufacturing specifications, conformal coating thickness is defined as the thickness of the final polymer film on a flat, unencumbered surface of the assembly, however conformal coating thickness on other assembly and component surfaces is not characterized. IPC-TR-587 is a report outlining an IPC study of...
1-8 of 8

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

J-STD-005B: Requirements for Soldering Pastes

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

J-STD-004D: Requirements for Soldering Fluxes

IPC-4413: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly