Menu
Close
Contact IPC

White Paper

Your results

Document #

Language

Products

IPC-WP-116A Cover Images

IPC-WP-116 - Revision A - White Paper

Guidance for the Development and Implementation of a Foreign Object Debris (FOD) Control Plan

Document #:
IPC-WP-116
Revision
A
Product Type
White Paper
Released:  03/01/2022
Language
English
Current Revision
The IPC-WP-116A white paper provides guidance to control and mitigate risks associated with the introduction of Foreign Object Debris (FOD) in electrical and electronic assemblies. Guidance to control and mitigate risks associated with the introduction of Foreign Object Debris (FOD) in electrical and electronic assemblies is provided. A template for developing a Foreign Object Debris (FOD) Control...

IPC-014 - Revision A - White Paper

Pb-free Electronics Risk Management (PERM) Council Position on the Use of Pb-free Electronics in the Aerospace and Defense Electronics Industries

Document #:
IPC-WP-014
Revision
A
Product Type
White Paper
Released:  04/07/2020
Language
English
Current Revision
Pb-free materials are considered a major technology disruption to traditional Pb-based interconnect materials for electronics, which is of particular concern for the aerospace & defense industries where safety cannot be compromised and applicable reliability data remains scarce. Until validated data and modelling methods are developed, projects considering Pb-free Aerospace & Defense products and...
no-image-available

IPC-WP-001 - White Paper

Soldering Capability White Paper Report

Document #:
IPC-WP-001
Revision
Original Version
Product Type
White Paper
Released:  08/01/1991
Language
English
Current Revision
Due to a concern in the electronic packaging industry about solderability problems, Foster Gray, PC Interconnects, developed this document for the Surface Mount Council. Areas covered are: design for the soldering process; solderable PWBs; solderable components and soldering process. Five different industry perspectives provide analysis of these issues. 35 pages. Released August 1991.
no-image-available

IPC-WP-012 - White Paper

Pb-free Electronics Risk Management (PERM) Council Pb-free Research Priorities

Document #:
IPC-WP-012
Revision
Original Version
Product Type
White Paper
Released:  05/02/2014
Language
English
Current Revision
Lead-free electronics continues to be a concern of the aerospace, defense, and high performance products (ADHP) industries. This is primarily due to the lack of data and knowledge to: thoroughly categorize performance under harsh service conditions and provide a level of confidence in reliability assessments of Pb-free electronics equal to those for traditional tin-lead electronics. To help close...
no-image-available

IPC-WP-015 - White Paper

Pb-free Electronics Risk Management (PERM) Council Re-baseline of the Lead-Free Manhattan Project

Document #:
IPC-WP-015
Revision
Original Version
Product Type
White Paper
Released:  04/01/2014
Language
English
Current Revision
The PERM Lead-Free Manhattan Project (LFMP) was established to identify the technology and knowledge gaps relevant to the implementation of commercially available Pb-free product in Aerospace & Defense Systems. These knowledge gaps threaten to affect the safety, performance and reliability of Aerospace & Defense systems, which cannot be compromised. Investment is required to close these knowledge...
no-image-available

IPC-WP-023 - White Paper

IPC Technology Solutions White Paper on Performance-Based Printed Board OEM Acceptance: The Hidden Reliability Threat

Document #:
IPC-WP-023
Revision
Original Version
Product Type
White Paper
Released:  05/01/2018
Language
English
Current Revision
IPC-WP-023 is an IPC Technology Solutions White Paper addressing reliability issues associated with stacked microvias. There is evidence that staggering vias can result in a more robust structure; however, staggering microvias is only a temporary solution to accommodate complex designs with microvias built with weak interface structures IPC-WP-023 white paper provides an investigation of these...
no-image-available

IPC/PERM-WP-022 - White Paper

Mitigation of Pure Tin Risk by Tin-Lead SMT Reflow - Results of an Industry Round-Robin - Final Report

Document #:
IPC/PERM-WP-022
Revision
Original Version
Product Type
White Paper
Released:  09/05/2018
Language
English
Current Revision
Manufacturers of high reliability electronics have been working for many years to mitigate the deleterious effects of tin whisker formation. One highly effective means to suppress the growth of tin whiskers is to replace the pure tin plating with reflowed tin-lead solder. One approach is to fully consume the tin plating by tin-lead solder during the SMT reflow process. This phenomenon of tin...
no-image-available

IPC-WP-003 - White Paper

Chip Mounting Technology

Document #:
IPC-WP-003
Revision
Original Version
Product Type
White Paper
Released:  08/01/1993
Language
English
Current Revision
Status of the technology discussion on the various methodologies for mounting and interconnecting active devices to a variety of substrate materials is summarized in this document. Reviews mounting techniques of tape automated bonding (TAB), chip on board (COB) and flip chip. Examinations of the most commonly used substrate options of laminate, ceramic and silicon are also reviewed. Editor: John...
no-image-available

IPC-MILMKT12-11-RFPDOA - White Paper

Is Your RFP D.O.A.

Document #:
IPC-RFP
Revision
Original Version
Product Type
White Paper
Released:  01/18/2012
Language
English
Current Revision
"Is Your RFP D.O. A." was presented at the IPC Conference for the PCB Industry: Critical Issues for the Military Market in December 2011 by Steve DeWaters, president, Penumbra Strategies, Inc. The author describes the procedures of the military in preparing an RFP and evaluating the proposals. He also describes the procedures to create an effective response to the RFP and some of the pitfalls of...
no-image-available

IPC-EMB - White Paper

Embedded Capacitor Technology; Status, Opportunity and Challenges

Document #:
IPC-EMB
Revision
Original Version
Product Type
White Paper
Released:  01/25/2012
Language
English
Current Revision
"Embedded Capacitor Technology; Status, Opportunity and Challenges" was presented by John Andresakis, vice president of strategic technology, Oak-Mitsui at the IPC Conference for the PCB Industry: Critical Issues for the Military Market, Washington D.C., in December 2011.The author explains how the use of this technology improves the performance, reliability and assembly cost of printed boards and...
no-image-available

IPC-SPVC - White Paper

Take Action Limits (TAL) for SAC305 Lead Free Soldering Processes Utilizing Solder Baths/Pots

Document #:
IPC-SPVC-TAL
Revision
Original Version
Product Type
White Paper
Released:  11/12/2009
Language
English
Current Revision
The IPC Solder Products Value Council’s Technical Subcommittee Report “Take Action Limits (TAL) for SAC305 Lead Free Soldering Processes Utilizing Solder Baths/Pots” reports on research on take action limits of solder pot contamination for SAC305 lead-free solder. As opposed to one maximum contamination level, the IPC SPVC opted to identify three action levels: Normal operation defined as the...
no-image-available

IPC-COMPTRACE-609 - White Paper

What You Can Do About Component Traceability

Document #:
IPC-CT
Revision
Original Version
Product Type
White Paper
Released:  07/07/2009
Language
English
Current Revision
The problem of counterfeit components continues to escalate. It is no longer limited to high value items like semiconductors. It can include connectors, resistors, passive components or anything that is in demand. What more could you be doing to ensure that the components you purchase are genuine? What can you do about component traceability? Jack Stradley, Manager, Business Development &...

IPC-WP-009 - White Paper

A Summary of Tin Whisker Research References

Document #:
IPC-WP-009
Revision
Original Version
Product Type
White Paper
Released:  05/14/2009
Language
English
Current Revision
As most of the world converts to lead-free manufacturing, the concern over tin whiskers as a reliability hazard has grown due to the emergence of pure tin as a dominate component surface finish. A significant amount of research on tin whisker formation and tin whisker mitigating strategies has been performed in both commercial and defense industries. This working paper is a summary of the...

IPC-WP-014 - White Paper

Pb-free Electronics Risk Management (PERM) Council Position on the Use of Pb-free Electronics in the Aerospace, Defense and High Performance Electronic Industries

Document #:
IPC-WP-014
Revision
Original Version
Product Type
White Paper
Released:  07/01/2014
Language
English
Pb-free materials are considered a major technology disruption to traditional Pb-based interconnect materials for electronics, which is of particular concern for the aerospace, defense, and high performance products (ADHP) industries where safety cannot be compromised and applicable reliability data remains scarce. Until validated data and modelling methods are developed, projects considering Pb...

IPC-WP-008 - White Paper

Setting Up Ion Chromatography Capability

Document #:
IPC-WP-008
Revision
Original Version
Product Type
White Paper
Released:  12/01/2005
Language
English
Ion chromatography has been recognized as a method for which the data output is ion specific and very precise in the quantification of ionic residues. This paper is intended for those contemplating the setup of an ion chromatography lab and provides many of the practical considerations that should be addressed, including the core components of an ion chromatograph system such as carrier solutions...
1-16 of 16

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

J-STD-005B: Requirements for Soldering Pastes

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

J-STD-004D: Requirements for Soldering Fluxes

IPC-4413: Specification for Finished Fabric Woven from Low Dk Glass for Printed Boards

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly