Standard Only

Your results

Products

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 10/19/2022

Language

English

Current Revision

IPC/WHMA-A-620E is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620E describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620E was developed by IPC and...

Document #:

IPC-SM-840

Revision

Product Type

Standard Only

Released: 12/22/2010

Language

English

Current Revision

Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reﬂect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

Document #:

IPC-CC-830

Revision

Product Type

Standard Only

Released: 01/15/2019

Language

English

Current Revision

The IPC-CC-830C standard establishes qualification and conformance requirements for electrical insulating compounds (conformal coatings). It has been designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy. The IPC-CC-830C standard covers: • The qualification and qualification retention of the conformal coating material (Table 3-1...

Document #:

IPC-CH-65

Revision

Product Type

Standard Only

Released: 07/25/2011

Language

English

Current Revision

This document includes lead free, no-clean, and environmental friendly chemistries. This is a collection of information on electronic board and assembly cleaning in a single location. This major revision explains the relationship between materials, processes, and contaminants in fabrication and assembly operations. It also addresses cleanliness assessment and process control in relation to...

Document #:

IPC-9203

Revision

Product Type

Standard Only

Released: 02/16/2023

Language

English

Current Revision

While there are a variety of industry test vehicles for the examination of material compatibility, the IPC-B-52 test board was created to meet the needs for testing both ion chromatograph and surface insulation resistance (SIR) which would be more representative of the manufacturing materials and processes. IPC-9203A standard addresses the IPC-B-52 test vehicle, which can be used to evaluate a...

Document #:

IPC/JEDEC-9704

Revision

Product Type

Standard Only

Released: 02/03/2012

Language

English

Current Revision

Strain gage testing allows for objective analysis of the strain and strain rate levels to which a surface mount package may be subjected to during assembly, test and operation. Excessive strain can result in various failure modes for different solder alloys, package types, surface finishes or laminate materials. This document describes specific guidelines for strain gage testing during the printed...

Document #:

IPC-9204

Revision

Product Type

Standard Only

Released: 05/05/2017

Language

English

Current Revision

This guideline describes flexibility and stretchability testing to evaluate printable electronics for stretchable and wearable applications. 26 pages. Released March 2017

Document #:

IPC-9701

Revision

Product Type

Standard Only

Released: 04/12/2022

Language

English

Current Revision

The IPC-9701B standard establishes a thermal cycling test method to characterize the fatigue lifetimes of surface mount solder attachments of electronic assemblies. The surface mount devices may be solder-attached to rigid, flexible or rigid-flex printed boards. The characterization results can be used to predict the field lifetime of solder attachments for the use environments and conditions of...

Document #:

IPC-9691

Revision

Product Type

Standard Only

Released: 09/08/2016

Language

English

Current Revision

This document is the product of the IPC Electrochemical Migration (ECM) Task Group. It was drafted to provide guidance regarding implementation of the User Guide for the IPC-TM-650, Method 2.6.25, Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing to evaluate the effects of mechanical stress, laminate material fracturing, ionic contamination, moisture...

Document #:

IPC-9202

Revision

Product Type

Standard Only

Released: 10/28/2022

Language

English

Current Revision

The IPC-9202A, Material and Process Characterization/Qualification Test Protocol that records changes in Surface Insulation Resistance (SIR) on a representative sample of a printed circuit assembly (PCA). It quantifies any deleterious effects that might arise from solder flux or other process residues left on external surfaces after soldering, which can cause unwanted electro-chemical reactions...

Document #:

IPC-9709

Revision

Product Type

Standard Only

Released: 11/29/2021

Language

English

Current Revision

The IPC-9709A standard guideline document establishes an Acoustic Emission (AE) method to enhance evaluation of the performance and reliability of surface mount attachments of electronic assemblies during mechanical loading.

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 01/21/2020

Language

English

IPC/WHMA-A-620D is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620D describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620D was developed by IPC and...

Document #:

IPC/WHMA-A-620

Revision

Original Version

Product Type

Standard Only

Released: 01/01/2012

Language

English

Current Revision

These tables are from IPC/WHMA-A-620 Revision B Chapter 19 Testing. They are provided in an electronic format that permits users to edit the tables to add user-specific criteria. These files are authorized for copying/reproduction.

Document #:

IPC-TM-650

Revision

Original Version

Product Type

Standard Only

Language

English

Current Revision

Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.

Document #:

IPC/JEDEC-9703

Revision

Original Version

Product Type

Standard Only

Released: 03/18/2009

Language

English

Current Revision

Establishes mechanical drop and shock and test guidelines for assessing solder joint reliability of printed board assemblies from system to component level. This document addresses methods to define mechanical shock use-conditions, methods to define system level, system printed board level and component test board level testing that correlate to such use conditions and guidance on the use of...

Document #:

IPC/JEDEC-9301

Revision

Original Version

Product Type

Standard Only

Released: 01/15/2019

Language

English

Current Revision

The IPC/JEDEC-9301document is an effort to standardize and document some of the basic tenets of a typical Finite Element Analysis (FEA) model, as well as, to educate new designers (and in some cases even experienced designers) on the basic information and best practices that should be captured and provided to technical reviewers of the results of FEA data.

Document #:

IPC-9241

Revision

Original Version

Product Type

Standard Only

Released: 01/13/2017

Language

English

Current Revision

This standard is intended as a guideline in the proper preparation of a metallographic sample (microsection) of a printed board. The finished microsection is used for evaluating the quality of the laminate system and plated structures (e.g. PTHs and vias). Microsection sample preparation is regarded by many as a highly developed skill. The guidelines in this standard discuss the many variables and...

Document #:

IPC-9708

Revision

Original Version

Product Type

Standard Only

Released: 12/14/2010

Language

English

Current Revision

Mechanical bend and shock tests are routinely performed on SMT assemblies to ensure that they can sustain anticipated production, handling and end use conditions. The strains and strain rates applied to SMT assemblies during bend and shock testing can lead to a variety of failure modes in the vicinity of the solder joints. This document provides test methods to evaluate the susceptibility of...

Document #:

IPC-CI-408

Revision

Original Version

Product Type

Standard Only

Released: 01/01/1994

Language

English

Current Revision

Provides information on design characteristics and the application of solderless surface mount connectors, including conductive adhesives to aid IC package and board interconnection. 34 pages. Released January 1994.

Document #:

IPC-SM-840

Revision

Product Type

Standard Only

Released: 04/30/2007

Language

English

Document #:

IPC-9706

Revision

Original Version

Product Type

Standard Only

Released: 01/14/2014

Language

English

Current Revision

Survey-based study presents data and analysis on the EMS industry, examining trends in sources of revenue, revenue per employee, services offered, markets served, manufacturing technology, capital investment, spending on equipment and materials and market size including forecasts and potential for market expansion. This study is based on data provided by a representative sample of 120 EMS...

Document #:

IPC-5702

Revision

Original Version

Product Type

Standard Only

Released: 06/01/2007

Language

English

Current Revision

Every electronics manufacturer, whether an original equipment manufacturer (OEM) or electronics manufacturing services (EMS) company, must determine if the unpopulated printed boards entering the assembly process have an adequate level of cleanliness. The question of “how clean is clean enough?” is one that has no definitive answer, as there is no "golden number" for board cleanliness. The issue...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 10/02/2017

Language

English

This is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies, and it includes new sections for safety wiring, safety cable, grommets, and raceways along with updated information across many of the sections. With over 700 photographs and illustrations, this standard describes materials, methods, tests and acceptance criteria for producing crimped...

Document #:

IPC-9701

Revision

Product Type

Standard Only

Released: 02/01/2006

Language

English

Provides specific test methods to evaluate the performance and reliability of surface mount solder attachments of electronic assemblies. Establishes levels of performance and reliability of the solder attachments of surface mount devices to rigid, flexible and rigid-flex circuit structures. When used with IPC-SM-785, it provides an understanding of the physics of SMT solder joint failure and an...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 10/30/2012

Language

English

Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...