Standard Only

Your results

Products

Document #:

IPC-7711/21

Revision

Product Type

Standard Only

Released: 07/02/2013

Language

Korean

수리 및 수정들에 대한 무연 제품 지원과 향상된 검사 지침에 대한 주요 업데이트! 이 안내 문서는 전자 어셈블리와 PCB의 수리 및 리웍을 위한 모든 것을 포함한다! IPC-7711B /7721B의 전자 어셈블리의 리웍, 수정 및 수리는 절차적인 업데이트에 의한, 하나의 완전한 절차를 통해 무연 솔더와 전통적인 일반 솔더(SnPb)로 솔더링된 어셈블리 모두에 대해 적용 가능성을 보장하였다. 이 단일의 책은 BGAs (reballing을 포함하여) 및 flex-print 수리에 대한 이전에 발간된 변경사항과 몇 개의 새로운 절차를 포함한다. Part 1은 일반적인 요건들로서, 사용의 편의를 위해 업데이트되어 중요한 방향과 모든 절차에 대한 지침을 제공하였다. 이 섹션은 리웍, 수리 및 수정 등에 공통적인...

Document #:

IPC-J-STD-004

Revision

Product Type

Standard Only

Released: 07/29/2008

Language

Chinese

This is the Chinese language version of J-STD-004A. Revision A covers requirements for qualification and classification of rosin, resin, organic and inorganic fluxes according to the activity level and halide content of the fluxes. It includes solder fluxes, flux-containing materials and low residue fluxes for no-clean processes. Associated test methods may have been updated and are available...

Document #:

IPC-J-STD-004

Revision

Product Type

Standard Only

Released: 05/05/2008

Language

Japanese

This is the Japanese language version of J-STD-004A. Revision A covers requirements for qualification and classification of rosin, resin, organic and inorganic fluxes according to the activity level and halide content of the fluxes. It includes solder fluxes, flux-containing materials and low residue fluxes for no-clean processes. Associated test methods may have been updated and are available...

Document #:

IPC-J-STD-003

Revision

Product Type

Standard Only

Released: 01/19/2009

Language

Chinese

This is the Chinese language version of J-STD-003B. This standard prescribes test methods, defect definitions and illustrations for assessing the solderability of printed board surface conductors, attachment lands, and plated-through holes utilizing either tin/lead or lead-free solders. This standard is intended for use by both vendor and user. The objective of the solderability test methods...

Document #:

IPC-7711/21

Revision

Product Type

Standard Only

Released: 06/11/2010

Language

Polish

IPC-7711B/7721B Wprowadzanie Poprawek, Modyfikacja i Naprawa Zespołów Elektronicznych zawiera zbiór zaktualizowanych procedur w celu zapewnienia właściwego stosowania zarówno do połączeń bezołowiowych jak tradycyjnych pakietów lutowanych spoiwem SnPb. Dokument ten zawiera wszystkie opublikowane wcześniej zmiany i kilka nowych procedur dotyczących elementów BGA (wliczając reballing) oraz naprawy...

Document #:

IPC-J-STD-006

Revision

Product Type

Standard Only

Released: 05/05/2008

Language

Japanese

This is the Japanese language version of J-STD-006B. This standard prescribes the nomenclature, requirements and test methods for electronic grade solder alloys; for fluxed and non-fluxed bar, ribbon, and powder solders, for electronic soldering applications; and for ''special'' electronic grade solders. This is a quality control standard and is not intended to relate directly to the material's...

Document #:

IPC-7711/21

Revision

Product Type

Standard Only

Released: 10/01/2003

Language

Polish

This is the Polish language version of IPC-7711/21A. IPC-7711A, Rework of Electronic Assemblies (with Change 1) and IPC-7721A, Repair and Modification of Printed Boards and Electronic Assemblies (with Changes 1 and 2) now includes additional support for BGAs and flex-print repair. IPC-7711A includes procedural requirements, tools, materials and methods to be used in removing and replacing...

Document #:

IPC-7711/21

Revision

Product Type

Standard Only

Released: 06/22/2009

Language

Spanish

This is the Spanish language translation of IPC-7711B/7721B IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new procedures for BGAs (including reballing) and flex...

Document #:

IPC-7711/21

Revision

Product Type

Standard Only

Released: 03/04/2013

Language

French

L’IPC 771B/7721B Reprise, Modification et Réparation des assemblages électroniques a subi une mise à jour complète procédure par procédure pour en assurer l’applicabilité aux assemblages sans plomb comme aux traditionnels brasés en plombé. Ce volume unique inclue tous les modifications publiées précédemment et plusieurs nouvelles procédures pour les BGA (incluant le rebillage) et la réparation des...

Document #:

IPC-7711/21

Revision

Product Type

Standard Only

Released: 01/27/2008

Language

Hungarian

Az IPC-7711B/7721B Elektronikus szerelvények újramunkálása, módosítása és javítása eljárásról eljárásra frissítésen esett át, hogy biztosítsa az alkalmazhatóságot az ólommentes és SnPb technológiával forrasztott szerelvényekre egyaránt. Ez az egységes kiadás tartalmazza az összes korábban kiadott változtatást és számos új eljárást BGA-kra (beleértve az újragolyózást is), valamint flexibilis...

Document #:

IPC-7530

Revision

Original Version

Product Type

Standard Only

Released: 11/18/2016

Language

Chinese

在群焊过程中，所有焊点均达到最低焊接（再流焊）温度是重要的以确保焊料合金和被焊基底金属之间形成冶金结合而达到焊接。冶金结合要求被焊接的两表面以及焊料需达到最低焊接温度并且维持充足的时间，以使焊料表面润湿。本文件提供了适当的温度曲线测试工具与有关温度曲线的各种技术和方法指南。共18页，于2001年5月发行。

Document #:

IPC-J-STD-005

Revision

Original Version

Product Type

Standard Only

Released: 05/05/2008

Language

Japanese

This is the Japanese language version of J-STD-005. Lists requirements for qualification and characterization of solder paste. Test methods and criteria for metal content, viscosity, slump, solder ball, tack and wetting of solder pastes are included. Supersedes QQ-S-571. Developed by IPC and EIA. 24 pages. Released January 1995.