Menu
Close
Contact IPC

Standards

Your results

Document #

Language

Products

IPC-7711/21 - Revision B - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  03/23/2009
Language
Swedish
Current Revision
This is the Swedish language translation of IPC-7711B/7721B IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new procedures for BGAs (including reballing) and flex...

IPC-7711/21 - Revision B - Standard Only

Refacerea, Modificarea și Reparația Ansamblurilor Electronice

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  08/06/2012
Language
Romanian
Current Revision
DESCRIERE engleză IPC-7711B/7721B Refacerea, Modificarea și Reparația Ansamblurilor Electronice a fost în mod total revizuit, procedură cu procedură, pentru a se asigura aplicabilitatea atât pentru ansamblurile lipite tradițional cu aliaje SnPb cât și pentru cele fără plumb. Acest unic volum include toate modificările anterior publicate și câteva proceduri noi pentru circuite BGA (inclusiv...
no-image-available

IPC-7525 - Revision C - Standard Only

模板设计指导 Stencil Design Guidelines

Document #:
IPC-7525
Revision
C
Product Type
Standard Only
Released:  11/01/2023
Language
Chinese
Current Revision
本标准是为设计与制造焊膏及表面贴装粘合剂用模板提供指导。本文件大部分内容是基于模板设计者、制造厂商和用户的经验编写的。
no-image-available

IPC-A-610 - Revision G - Addendum - Telecom

IPC-A-610G 电信补充标准

Document #:
IPC-A-610
Revision
G
Product Type
Addendum
Released:  01/15/2021
Language
Chinese
Current Revision
当采购文件特别要求对电子产品IPC-A-610G可接受性的IPC-A-610GC电信附录时，对电信产品提出了特定要求。本文档中的信息通过提供其他要求来确保电气和电子组件满足要求符合GE-78-CORE的客户的要求，从而补充或替代了IPC-A-610修订版G专门确定的要求
no-image-available

IPC-TM-650 - Standard Only

Method Development Packet

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Development Packet
Released:  06/06/2012
Language
English
Current Revision
This document has been created to help define criteria that will yield better test methods for use by the electronics and related industries. Key objectives to validating a new test method procedure are covered, including the usage of objective evidence to verify that the elements defined within a method fulfill the intended use and that the method yields repeatable and reproducible results when...

IPC-4556 - Standard Only

印制板化学镍/钯/浸金（ENEPIG）规范

Document #:
IPC-4556
Revision
Original Version
Product Type
Standard Only
Released:  11/26/2018
Language
Chinese
Current Revision
本规范规定了使用化学镍/钯/浸金（ENEPIG）作为印制板表面处理的要求。本规范规定了ENEPIG应用于焊接、金属线键合和接触面涂覆层的沉积厚度规格。本规范适用于化学药水供应商、印制板制造商、电子制造服务业（EMS）和原始设备制造商（OEM）。ENEPIG是沉积在以铜为基底金属上的一个三层的表面处理。它是一种多功能的表面处理，适用于焊接和金、铝和铜金属线键合。它也适合作为软薄膜和钢凸圆接触的配合表面。其它应用包括使用低插入力（LIF）和零插入力（ZIF）板边连接器和压入式应用。化学钯层形成的扩散阻挡层，阻碍镍扩散到金表面。浸金防止钯层在加工前与污染物反应，否则可能会影响连接制程，如金属线键合和焊接。全文共82页，2013年发布。2018年10月翻译。
no-image-available

IPC-4554 - Standard Only

印制板浸锡规范—含修订本1

Document #:
IPC-4554
Revision
Original Version
Product Type
Standard Only
Released:  01/01/2012
Language
Chinese
Current Revision
IPC-4554，印制板浸锡规范，包含在IPC-455X系列规范里。455X系列规范规定了取代印制板非共面处理（经常被称为锡-铅热风整平处理）的表面处理的要求。该规范是一个全彩色文档，适用于供应商或印制板制造商，电镀化学供应商，合同制造商或EMS工厂和原始设备制造商（OEM）。浸锡是一种通过化学置换反应，直接将金属沉积于印制板金属基材-铜表面的处理方式。浸锡主要作为可焊表面使用，目前也已使用在压入式连接及零插入力（ZIF）连接器的界面上。浸锡可以保护其下面的铜面在保存期限内不被氧化，符合IPC/ EIA J-STD-003规定的第3类涂覆层耐久性要求（贮存期大于6个月）。插入的修订本1是关于浸锡可焊性的更详细说明，使用锡铅和无铅焊料以及适当的助焊剂。
76-86 of 86

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly