Menu
Close
Contact IPC

Standards

Your results

Document #

Language

Products

IPC-7711/21 - Revision B - Standard Only

Přepracování, modifikace a opravy elektronických sestav

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  01/27/2008
Language
Czech
Current Revision
Download an update to published IPC-7711B/7721B Part 3 Procedure 6.1.(English only) Základni aktualizace pro bezolovnatou technologii a zlepšené návody pro kontrolu oprav a modifikací Tento návod obsahuje vše, čeho je zapotřebí pro opravy a přepracování elektronických sestav a desek plošných spojů! IPC 7711/7721 Přepracování,modifikace a opravy elektronických sestav prošla kompletní aktualizaci...
no-image-available

IPC/WHMA-A-620 - Revision B - Standard Only

Kablo ve Kablo Takımları için Kabul Gereklilikleri

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  11/12/2014
Language
Turkish
Current Revision
Revizyon B, Kablo ve Kablo Takımlarının Kabul Gereklilikleri için endüstrinin ortak dökümanı olmayı sürdürmektedir. IPC ile Kablo Takımları Üreticileri Birliği (WHMA), bu önemli güncellemeyi geliştirmek için beraber çalışmışlardır. YENİ! Dolgu, kalıplı dolgu, ekleme, yalıtkan desteği olmayan krimp kontakları, sıralı yalıtkan yer değiştirme konnektörleri, konnektör bağlantısı, sert ve uyumlu kablo...

IPC/WHMA-A-620 - Revision B - Standard Only

Juhtme- ja kaablikoostude vastavusnõuded

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  12/01/2014
Language
Estonian
Current Revision
IPC/WHMA-A-620B on ainus juhtme- ja kaablikoostude vastavusnõudeid sisaldav tööstuse konsensuslik standard ning see on väljatöötatud IPC ja Wire Harness Manufacturers Association (WHMA). UUS! Standard sisaldab laialdasi nõudeid survevalule, vormivalule, juhtmete jätkamisele, ilma isolatsiooni toeta juhtme pressimisele, isolatsiooni eemalduseta ühendustele, pistikutele, monoliitsetele ja tinatatud...
no-image-available

IPC-7711/21 - Revision B - Standard Only

Elektronik Takımlarda Yeniden İşlem, Modifikasyon ve Onarım

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  11/30/2007
Language
Turkish
Current Revision
IPC-7711/7721 Elektronik Takımlarda Yeniden İşlem, Modifikasyon ve Onarım, kurşunsuz ve geleneksel Kalay-Kurşun ile lehimli takımların her ikisi için de uygulanabilirliği sağlamak için prosedür bazında eksiksiz bir güncellemesi geçerli olmuştur. Bu tek cilt daha önce yayınlanan tüm değişiklikleri, BGA'lar için (topların yenilenmesini de içeren) yeni birkaç prosedürü ve esnek-baskı devre kartı...

IPC-7711/21 - Revision B - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  03/23/2009
Language
Swedish
Current Revision
This is the Swedish language translation of IPC-7711B/7721B IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new procedures for BGAs (including reballing) and flex...

IPC-7711/21 - Revision B - Standard Only

Refacerea, Modificarea și Reparația Ansamblurilor Electronice

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  08/06/2012
Language
Romanian
Current Revision
DESCRIERE engleză IPC-7711B/7721B Refacerea, Modificarea și Reparația Ansamblurilor Electronice a fost în mod total revizuit, procedură cu procedură, pentru a se asigura aplicabilitatea atât pentru ansamblurile lipite tradițional cu aliaje SnPb cât și pentru cele fără plumb. Acest unic volum include toate modificările anterior publicate și câteva proceduri noi pentru circuite BGA (inclusiv...

IPC-HDBK-620 - Handbook

Handbook and Guide to IPC-D-620 & IPC/WHMA-A-620

Document #:
IPC-HDBK-620
Revision
Original Version
Product Type
Handbook
Released:  04/02/2018
Language
English
Current Revision
IPC-HDBK-620 is a companion reference to IPC-D-620 ‘‘Design and Critical Process Requirements for Cable and Wiring Harnesses’’ and IPC/WHMA-A-620 ‘‘Requirements and Acceptance for Cable and Wire Harness Assemblies” and provides supporting information and technical rationale for requirements in those standards. This guidance document is highly recommended for anyone who wants to learn the “how” and...
IPC-WHMA-A-620D S CN Cover

IPC/WHMA-A-620 - Revision D - Addendum - Space and Military

IPC/WHMA-A-620D航天及军事应用电子部件补充标准

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Addendum
Released:  07/28/2021
Language
Chinese
Current Revision
IPC/WHMA-A-620D-S航天补充标准对IPC/WHMA-A-620D标准提出了附加要求，以确保线缆及线束组件在进入军事和太空环境中运行时的振动与热漂移性能仍然可靠。 IPC/WHMA-A-620D-S不能作为独立文档使用，阅读时必须结合基础标准IPC/WHMA-A-620D。
no-image-available

IPC-A-610 - Revision G - Addendum - Telecom

IPC-A-610G 电信补充标准

Document #:
IPC-A-610
Revision
G
Product Type
Addendum
Released:  01/15/2021
Language
Chinese
Current Revision
当采购文件特别要求对电子产品IPC-A-610G可接受性的IPC-A-610GC电信附录时，对电信产品提出了特定要求。本文档中的信息通过提供其他要求来确保电气和电子组件满足要求符合GE-78-CORE的客户的要求，从而补充或替代了IPC-A-610修订版G专门确定的要求
no-image-available

IPC/WHMA-A-620 - Revision C - Addendum - Rail Transit

线缆及线束组件的要求与验收轨道交通补充标准Rail Transit Addendum to IPC/WHMA-A-620C

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Addendum
Released:  06/22/2022
Language
Chinese
Current Revision
IPC/WHMA-A-620C-R 轨道交通补充标准提供了对 IPC/WHMA-A-620C 标准的补充要求，描述了用于轨道交通行业的线缆、线束及其组件的相关要求，如生产压接、机械固定和焊接互连的材料、方法、测试和验收标准等，以保证其在高速铁路环境下电缆线束及其组件的高度可靠性和环境适应性。
no-image-available

IPC-2231 - Standard Only

卓越设计（DFX）指南

Document #:
IPC-2231
Revision
Original Version
Product Type
Standard Only
Released:  04/09/2020
Language
Chinese
Current Revision
本文件提供了制定最佳实践方法的指南，用于在开发正式DFX（面向可制造性、可制作性、可组装性、可测试性、成本、可靠性、环境、重用性设计）的过程中对采用表面贴装和通孔器件的印制板组件进行布局。

IPC-7092 - Standard Only

埋入式元器件涉及和组装工艺的实施

Document #:
IPC-7092
Revision
Original Version
Product Type
Standard Only
Released:  01/20/2020
Language
Chinese
Current Revision
本标准描述了在印制板中以成形或放置方式实现的有源和无源元器件在设计和组装方面的挑战。包括内部电子元器件的完整结构可用于表面贴装和／或通孔元器件连接。在组装过程中，多层结构变成准备为进一步加工的完整产品，它可由有机、无机（陶瓷）或两类兼有的材料制成。

IPC-7093 - Standard Only

底部端子元器件(BTC)设计和组装工艺的实施

Document #:
IPC-7093
Revision
Original Version
Product Type
Standard Only
Released:  03/28/2011
Language
Chinese
Current Revision
本标准描述了采用底部端子表面贴装元器件(BTC)在设计和组装方面的挑战，BTC元器件外部连接由构成元器件整体一部分的金属端子组成。本文件中BTC包括了仅有底部端子并要实施表面贴装的所有类型元器件。包括QFN、 DFN、 SON、 LGA、MLP 和MLF等业界描述性术语。这里所含信息的焦点放在BTCs元器件的关键设计、组装、检验、维修以及和BTC相关的可靠性问题上。 这份文件的目标读者是与电子设计、组装、检验和维修等过程有关的经理、设计和工艺工程师、操作员和技术员。本文件的目的是给正考虑采用锡/铅、无铅、粘合剂或其它形式互连工艺来组装BTC类元器件的那些公司提供实际而有用的资讯。虽然本文件不是包含一切的秘方，但它识别了影响进行稳健和可靠组装的许多特性，可给正面临组装制程问题的元器件供应商提供指导性的信息。全文共68页。2011年3月发布。2014年5月翻译。

IPC-7530 - Standard Only

Útmutató tömegforrasztási (reflow és hullám) folyamatok hőmérsékleti profiljának kialakításához

Document #:
IPC-7530
Revision
Original Version
Product Type
Standard Only
Released:  04/19/2014
Language
Hungarian
Current Revision
MEGHATÁROZÁS> angolul MEGHATÁROZÁS angolul A tömegforrasztás során alapvető fontosságú, hogy mindegyik forraszkötés elérje a minimális forrasztási hőmérsékletet ezzel biztosítható, hogy a forraszanyag és az összeforrasztandó fémfelületek között diffúziós kötés jöjjön létre. A diffúziós kötésnek mindkét forrasztandó fémfelület és a forraszanyag között létre kell jönnie. Ehhez a minimális...
76-93 of 93

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-8401: Guidelines for In-Mold Electronics

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly