Standards

Your results

Products

Document #:

IPC-6013

Revision

Product Type

Addendum

Released: 04/12/2022

Language

English

Current Revision

The IPC-6013EM Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6013E, for flexible/rigid-flexible printed boards that must meet requirements to high reliability medical device applications. IPC-6013EM is the only global industry-consensus standard addendum for Medical Applications to Qualification and Performance...

Document #:

IPC-TM-650

Revision

Original Version

Product Type

Standard Only

Language

English

Current Revision

Contains over 150 industry approved test techniques and procedures for chemical, mechanical, electrical, and environmental tests on all forms of printed boards and connectors. New and updated test methods are available for download at https://www.ipc.org/test-methods.

Document #:

IPC-6012

Revision

Product Type

Redline Standard

Released: 10/09/2023

Language

English

Current Revision

IPC-6012F Redline document shows the changes from IPC-6012E to IPC-6012F in a side-by-side comparison of the two documents. The IPC-6012F redline is available in both electronic and hardcopy format.

Document #:

IPC/EIA-J-STD-028

Revision

Original Version

Product Type

Standard Only

Released: 08/01/1999

Language

English

Current Revision

This standard establishes construction detail requirements for bumps and other terminal structures used for Flip Chip Scale carriers. The specific standards for different terminations are appropriately matched to a particular interconnection process and include such diverse terminations as solder bumps, columns, non-melting stand-offs and conductive polymer deposits. The document articulates a set...

Document #:

IPC-CA-821

Revision

Original Version

Product Type

Standard Only

Released: 01/01/1995

Language

English

Current Revision

Covers requirements and test methods for thermally conductive dielectric adhesives used to bond components in place. Permanent, removable and self-shimming adhesives are addressed. 18 pages. Released January 1995.

Document #:

IPC-6015

Revision

Original Version

Product Type

Standard Only

Released: 02/01/1998

Language

English

Current Revision

Establishes the specific requirements for organic mounting structures used to interconnect chip components, which in combination form the completed functional organic single-chip module (SCM-L) or organic multichip module (MCM-L) assembly. Includes the quality and reliability assurance requirements that must be met for their acquisition. For use with IPC-6011. 25 pages. Released February 1998.

Document #:

IPC-5704

Revision

Original Version

Product Type

Standard Only

Released: 01/27/2010

Language

English

Current Revision

Printed board quality encompasses many parameters, cleanliness being one important parameter. This document defines the recommended general requirements for the cleanliness of unpopulated (bare) single, double-sided and multilayer printed boards. Coverage is given to Ion Chromatography (IC) testing and Ionic cleanliness testing for process control. 6 pages. Released December 2009.

Document #:

IPC-D-279

Revision

Original Version

Product Type

Standard Only

Released: 07/01/1996

Language

English

Current Revision

Establishes design concepts, guidelines and procedures for reliable printed wiring assemblies. Focuses on SMT or mixed technology PWAs, specifically addressing the interconnect structure and the solder joint itself. Discusses substrates, components, attachment materials, coatings and assembly processes and testing considerations. In addition, this document contains detailed appendices covering...

Document #:

IPC-OI-645

Revision

Original Version

Product Type

Standard Only

Released: 10/01/1993

Language

English

Current Revision

Establishes requirements, definitions and certification provisions for optical inspection aids. Defines inspection grades to be used as accept/reject criteria for optical inspection aids. 40 pages. Released October 1993.

Document #:

IPC-9641

Revision

Original Version

Product Type

Standard Only

Released: 07/10/2013

Language

English

Current Revision

Printed board flatness is largely affected by a change in intrinsic properties through exposure to variances in temperature. The worst case deviation of the printed board from flatness may be at room temperature, peak temperature during reflow, or at any temperature in between. Printed board flatness must therefore be characterized during the entire reflow thermal cycle, and not solely at room...

Document #:

IPC-MS-810

Revision

Original Version

Product Type

Standard Only

Released: 10/01/1993

Language

English

Current Revision

Discusses the many variables and problems associated with the process--from sample removal to micro-etch-- and the variables common to high volume microsection. The process variables and problems are organized so that the reader can research a specific issue or overview the variables of a process area. 31 pages. Released October 1993.

Document #:

IPC-9241

Revision

Original Version

Product Type

Standard Only

Released: 01/13/2017

Language

English

Current Revision

This standard is intended as a guideline in the proper preparation of a metallographic sample (microsection) of a printed board. The finished microsection is used for evaluating the quality of the laminate system and plated structures (e.g. PTHs and vias). Microsection sample preparation is regarded by many as a highly developed skill. The guidelines in this standard discuss the many variables and...

Document #:

IPC-MC-790

Revision

Original Version

Product Type

Standard Only

Released: 07/01/1992

Language

English

Current Revision

Provides information on multichip module technology, including parametric data, design and manufacturing information and a proposed categorization of various approaches to multichip interconnect substrate technologies based on dielectric family. 120 pages. Released August 1992.

Document #:

IPC-9631

Revision

Original Version

Product Type

Standard Only

Released: 12/15/2010

Language

English

Current Revision

IPC-9631 addresses concerns and considerations related to IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation. This document describes how the test method is intended for use and the rationale behind some of the protocols and requirements. This document was developed with the understanding that the test method will require special equipment and the proper set-up and...

Document #:

IPC-5703

Revision

Original Version

Product Type

Standard Only

Released: 05/17/2013

Language

English

Current Revision

Printed board cleanliness has historically been an unknown factor in the quality assessment of unpopulated (bare) printed boards; this has often been attributed to a lack of understanding of materials and processes. This document addresses the various printed board fabrication processes and how each may impact, directly or indirectly, the final cleanliness of packaged bare printed boards and...

Document #:

IPC-5702

Revision

Original Version

Product Type

Standard Only

Released: 06/01/2007

Language

English

Current Revision

Every electronics manufacturer, whether an original equipment manufacturer (OEM) or electronics manufacturing services (EMS) company, must determine if the unpopulated printed boards entering the assembly process have an adequate level of cleanliness. The question of “how clean is clean enough?” is one that has no definitive answer, as there is no "golden number" for board cleanliness. The issue...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 06/30/2015

Language

French

Current Revision

Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 01/13/2023

Language

Chinese

Current Revision

IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 02/03/2015

Language

German

Current Revision

Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...

Document #:

IPC/JEDEC-J-STD-033

Revision

Product Type

Standard Only

Released: 02/18/2019

Language

Spanish

Current Revision

El IPC/JEDEC J-STD-033D proporciona a los fabricantes de dispositivos de montaje superficial y a los usuarios con métodos estandarizados para la manejo, embalaje, transporte y uso de componentes sensibles a la humedad/reflujo. Estos métodos ayudan a evitar daños por la absorción de humedad y por la exposición a las temperaturas de la soldadura por reflujo que pueden tener como resultado una...

Document #:

IPC-6012

Revision

Product Type

Standard Only

Released: 04/01/2024

Language

Chinese

Current Revision

此标准涵盖了刚性印制板的鉴定和性能要求，印制板类型包括单/双面板、带或不带镀覆孔、带或不带盲孔/埋孔和金属芯的多层板。该规范涉及最终产品和表面处理涂敷要求、导体、通孔/过孔、验收测试频次和质量一致性以及电气、机械和环境要求。IPC-6012F新增和修订了一些印制板的要求，例如背钻孔结构，选择性表面处理，铜包覆电镀，印制板阶梯槽，中间目标连接盘，可焊性测试，显微切片分析，以及热冲击和基于性能测试的微导通孔结构的可靠性问题等。 IPC-6012F与IPC-6011一起使用，取代IPC-6012E。

Document #:

IPC/JEDEC-J-STD-020

Revision

Product Type

Standard Only

Released: 03/04/2008

Language

German

Current Revision

This is the German Language version of IPC-J-STD-020D. Updated with extended support for components used for lead free assembly! This standard identifies the classification levels of nonhermetic solid state surface mount devices that are sensitive to moisture-induced stress. It is used to determine which classification level should be used for initial reliability qualification. These devices can...

Document #:

IPC-6012

Revision

Product Type

Standard Only

Released: 03/15/2024

Language

Japanese

Current Revision

本仕様書は、リジッドプリント基板(片面/両面基板、めっきスルーホールが有る/無い基板、ブラインドビア/ベリードビアが有る/無い多層基板)およびメタルコア基板の認定と性能について規定するものである。本仕様書では、表面処理と表面めっきコーティングに関する要求事項や、導体、ホール/ビア、受入試験頻度、品質適合性、また、電気的・機械的・環境的な要求事項についても触れている。改版F(リビジョンF)では、プリント基板のキャビティ、銅ラップめっき、中間対象ランド、はんだ付性試験、ディウェッティング、マイクロセクション評価、内層めっき部、絶縁間隙、マイクロビア構造の信頼性問題など、新規要件や追加要件が多く採用されている。本書はIPC-6011と併せて使用する。IPC-6012Eに優先する。

Document #:

IPC/JEDEC-J-STD-020

Revision

Product Type

Standard Only

Released: 11/27/2023

Language

Chinese

Current Revision

IPC/JEDEC J-STD-020F标准旨在确定对湿气诱发应力敏感的非气密表面贴装器件（SMD）的潮湿敏感度分级，从而能够对其进行正确地包装、储存和操作，以避免其在再流焊连接和/或维修操作时受到损坏。 IPC/JEDEC J-STD-020F标准可用于确定非密封SMD鉴定应使用的分类级别。通过该测试方法中的标准本身不足以保证长期可靠性。根据JESD22-A113，本文件为SMD生成的湿度敏感度等级（MSL）用于确定预处理的浸泡条件，以及如何根据J-STD-033正确包装、储存和处理SMD，以避免在组装回流焊连接和/或维修操作期间损坏。对于可能对过程敏感的IC器件，请参考J-STD-075，以确定是否需要PSL（过程敏感等级）分类。

Document #:

IPC/JEDEC-J-STD-020

Revision

Product Type

Standard Only

Released: 09/21/2021

Language

Japanese

Current Revision

IPC JEDEC J-STD-020は、表面実装部品(SMD)の吸湿耐性水準(MSL)の分類水準を特定し、適切にパッケージ化および保管され、また取り扱われることで、組立のはんだリフロー接続および/またはリペア作業中の熱的/機械的損傷を回避することを目的としている。J-STD-020は、高温による鉛フリーはんだ、および低温によるSnPbはんだの各組立で取り扱われる部品を対象としている。このリビジョンでは適用範囲および用途における一貫性を確保するため、規格書内の多くの領域で明確な説明が追加された。本書では、ポリマー層のあるベアダイおよび非ICパッケージの使用に関する考慮事項について触れている。なお本書(リビジョンE)では、分類温度 (Tc)、パッケージの体積、乾燥重量の特性評価、時間間隔の特性を考慮した乾燥重量の決定方法についても明確にし、最新情報を記載している。また...