Menu
Close
Contact IPC

Standards

Your results

Document #

Language

Products

IPC/WHMA-A-620 - Revision B - Standard Only

Juhtme- ja kaablikoostude vastavusnõuded

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  12/01/2014
Language
Estonian
Current Revision
IPC/WHMA-A-620B on ainus juhtme- ja kaablikoostude vastavusnõudeid sisaldav tööstuse konsensuslik standard ning see on väljatöötatud IPC ja Wire Harness Manufacturers Association (WHMA). UUS! Standard sisaldab laialdasi nõudeid survevalule, vormivalule, juhtmete jätkamisele, ilma isolatsiooni toeta juhtme pressimisele, isolatsiooni eemalduseta ühendustele, pistikutele, monoliitsetele ja tinatatud...
no-image-available

IPC-7711/21 - Revision B - Standard Only

Elektronik Takımlarda Yeniden İşlem, Modifikasyon ve Onarım

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  11/30/2007
Language
Turkish
Current Revision
IPC-7711/7721 Elektronik Takımlarda Yeniden İşlem, Modifikasyon ve Onarım, kurşunsuz ve geleneksel Kalay-Kurşun ile lehimli takımların her ikisi için de uygulanabilirliği sağlamak için prosedür bazında eksiksiz bir güncellemesi geçerli olmuştur. Bu tek cilt daha önce yayınlanan tüm değişiklikleri, BGA'lar için (topların yenilenmesini de içeren) yeni birkaç prosedürü ve esnek-baskı devre kartı...

IPC-CH-65 - Revision B - Standard Only

印制板及组件清洗指南

Document #:
IPC-CH-65
Revision
B
Product Type
Standard Only
Released:  05/09/2014
Language
Chinese
Current Revision
描述 简要介绍 （英文） 更新了新技术，包括无铅、免清洗及环保化学品。 本文件集合了电路板及组件清洗信息。该修订版本主要阐述了制造和组装运营中材料、制程及污染物之间的关系。它还提出清洁度评估方案和涉及清洁度的制程控制方案。配有彩图帮助理解。全文共200页。2011年7月修订。2013年8月翻

IPC-7525 - Revision B - Standard Only

Designrichtlinie für Druckschablonen

Document #:
IPC-7525
Revision
B
Product Type
Standard Only
Released:  04/15/2013
Language
German
Current Revision
Dieses Dokument unterstützt Richtlinien für das Design und die Herstellung von Druckschablonen für Lotpasten und Kleber für die Oberflächenmontage für THT- und THT/SMD-Technologie. Darin eingeschlossen sind die Unterschiede zwischen bleihaltigen und bleifreien Lotpasten, Überdruckung, Doppeldruck und Stufenschablonen Designs. Enthalten sind ebenfalls Beispiele für ein Bestellformular und die...

IPC-SM-817 - Revision A - Standard Only

表面贴装用绝缘粘合剂通用规范

Document #:
IPC-SM-817
Revision
A
Product Type
Standard Only
Released:  10/29/2015
Language
Chinese
Current Revision
涵盖了从贴装到焊接制程用于固定元器件的绝缘粘合剂的要求和测试方法并作为印制板的一部分的长期性能。共9页。2014年12月发布。2015年6月翻译。

IPC-7711/21 - Revision B - Standard Only

Rework, Modification and Repair of Electronic Assemblies

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  03/23/2009
Language
Swedish
Current Revision
This is the Swedish language translation of IPC-7711B/7721B IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new procedures for BGAs (including reballing) and flex...

IPC-7711/21 - Revision B - Standard Only

Refacerea, Modificarea și Reparația Ansamblurilor Electronice

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  08/06/2012
Language
Romanian
Current Revision
DESCRIERE engleză IPC-7711B/7721B Refacerea, Modificarea și Reparația Ansamblurilor Electronice a fost în mod total revizuit, procedură cu procedură, pentru a se asigura aplicabilitatea atât pentru ansamblurile lipite tradițional cu aliaje SnPb cât și pentru cele fără plumb. Acest unic volum include toate modificările anterior publicate și câteva proceduri noi pentru circuite BGA (inclusiv...
no-image-available

IPC-7525 - Revision C - Standard Only

模板设计指导 Stencil Design Guidelines

Document #:
IPC-7525
Revision
C
Product Type
Standard Only
Released:  11/01/2023
Language
Chinese
Current Revision
本标准是为设计与制造焊膏及表面贴装粘合剂用模板提供指导。本文件大部分内容是基于模板设计者、制造厂商和用户的经验编写的。
IPC-WHMA-A-620D S CN Cover

IPC/WHMA-A-620 - Revision D - Addendum - Space and Military

IPC/WHMA-A-620D航天及军事应用电子部件补充标准

Document #:
IPC/WHMA-A-620
Revision
D
Product Type
Addendum
Released:  07/28/2021
Language
Chinese
Current Revision
IPC/WHMA-A-620D-S航天补充标准对IPC/WHMA-A-620D标准提出了附加要求，以确保线缆及线束组件在进入军事和太空环境中运行时的振动与热漂移性能仍然可靠。 IPC/WHMA-A-620D-S不能作为独立文档使用，阅读时必须结合基础标准IPC/WHMA-A-620D。
no-image-available

IPC/WHMA-A-620 - Revision C - Addendum - Rail Transit

线缆及线束组件的要求与验收轨道交通补充标准Rail Transit Addendum to IPC/WHMA-A-620C

Document #:
IPC/WHMA-A-620
Revision
C
Product Type
Addendum
Released:  06/22/2022
Language
Chinese
Current Revision
IPC/WHMA-A-620C-R 轨道交通补充标准提供了对 IPC/WHMA-A-620C 标准的补充要求，描述了用于轨道交通行业的线缆、线束及其组件的相关要求，如生产压接、机械固定和焊接互连的材料、方法、测试和验收标准等，以保证其在高速铁路环境下电缆线束及其组件的高度可靠性和环境适应性。
no-image-available

IPC-TM-650 - Standard Only

Method Development Packet

Document #:
IPC-TM-650
Revision
Original Version
Product Type
Development Packet
Released:  06/06/2012
Language
English
Current Revision
This document has been created to help define criteria that will yield better test methods for use by the electronics and related industries. Key objectives to validating a new test method procedure are covered, including the usage of objective evidence to verify that the elements defined within a method fulfill the intended use and that the method yields repeatable and reproducible results when...
no-image-available

IPC-9703 - Standard Only

焊点可靠性的机械冲击测试指南

Document #:
IPC-9703
Revision
Original Version
Product Type
Standard Only
Released:  09/19/2019
Language
Chinese
Current Revision
本标准建立了机械跌落和冲击测试指南，用于评估印刷电路板组件从系统到组件级别的焊点可靠性。 本文件介绍了定义机械冲击使用条件的方法，定义系统级别的方法；系统级印刷电路板以及与此类使用条件相关的元器件测试板级别的测试，以及使用实验测量机械冲击测试的指导。 正文42页。 2009年3月英文版发布。2019年3月翻译。

IPC-9702 - Standard Only

板极互连的单向弯曲特性描述

Document #:
IPC-9702
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2004
Language
Chinese
Current Revision
本文件旨在描述元器件板级互连的断裂强度特性，它详细说明了确定板级器件互连对非周期板组装和测试操作过程中可能发生的弯曲载荷的抗断裂力的常用方法。本文件适用于采用常规再流焊接技术连接到印制板上的表面贴装元器件，并补充了有关运输、装卸或现场操作过程中的机械冲击或撞击的现有标准。全文共14页，2004年6月正式发布英文版，2011年6月发布中文版 预览本标准
no-image-available

IPC-9708 - Standard Only

鉴定印制板组件焊盘坑裂的测试方法

Document #:
IPC-9708
Revision
Original Version
Product Type
Standard Only
Released:  07/24/2013
Language
Chinese
Current Revision
简要介绍 （英文） 对SMT组件定期进行机械弯曲和冲击测试，以确保它们能够承受预期的生产、搬运和最终使用条件。在弯曲和冲击测试过程中，加载于SMT组件的应变和应变率在焊点附近会导致各种失效模式。本文件提供了测试方法去评估印制板组装（PBA）材料的敏感性和关于表面贴装技术（SMT）的连接焊盘下方绝缘材料接合失效的设计。这些测试方法，包括引脚拉拔、焊球拉拔、焊球剪切测试，可以对不同的印制板的材料和设计参数进行排序和比较。全文共17页。2010年12月发布。2013年5月翻译。
76-93 of 93

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-8401: Guidelines for In-Mold Electronics

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly