Menu
Close
Contact IPC

Standards

Your results

Document #

Language

Products

IPC-9631 - Standard Only

User Guide for IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation

Document #:
IPC-9631
Revision
Original Version
Product Type
Standard Only
Released:  12/15/2010
Language
English
Current Revision
IPC-9631 addresses concerns and considerations related to IPC-TM-650, Method 2.6.27, Thermal Stress, Convection Reflow Assembly Simulation. This document describes how the test method is intended for use and the rationale behind some of the protocols and requirements. This document was developed with the understanding that the test method will require special equipment and the proper set-up and...
no-image-available

IPC-SM-840 - Revision D - Standard Only

Qualification and Performance<br>Specification of Permanent Solder Mask

Document #:
IPC-SM-840
Revision
D
Product Type
Standard Only
Released:  04/30/2007
Language
English
Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reflect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

IPC-5703 - Standard Only

Cleanliness Guidelines for Printed Board Fabricators

Document #:
IPC-5703
Revision
Original Version
Product Type
Standard Only
Released:  05/17/2013
Language
English
Current Revision
Printed board cleanliness has historically been an unknown factor in the quality assessment of unpopulated (bare) printed boards; this has often been attributed to a lack of understanding of materials and processes. This document addresses the various printed board fabrication processes and how each may impact, directly or indirectly, the final cleanliness of packaged bare printed boards and...

IPC-5702 - Standard Only

Guidelines for OEMs in Determining Acceptable Levels of Cleanliness of Unpopulated Printed Boards

Document #:
IPC-5702
Revision
Original Version
Product Type
Standard Only
Released:  06/01/2007
Language
English
Current Revision
Every electronics manufacturer, whether an original equipment manufacturer (OEM) or electronics manufacturing services (EMS) company, must determine if the unpopulated printed boards entering the assembly process have an adequate level of cleanliness. The question of “how clean is clean enough?” is one that has no definitive answer, as there is no "golden number" for board cleanliness. The issue...

IPC/JEDEC-J-STD-033 - Revision C - Standard Only

Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices

Document #:
IPC/JEDEC-J-STD-033
Revision
C
Product Type
Standard Only
Released:  08/01/2014
Language
English
Provides surface mount device manufacturers and users with standardized methods for handling, packing, shipping and use of moisture/reflow sensitive components. These methods help avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation and damaged components. These procedures provide a minimum shelf life of 12 months...

IPC-T-50 - Revision M - Standard Only

Termes et Définitions pour les Circuits Électroniques Imprimés et Assemblés

Document #:
IPC-T-50
Revision
M
Product Type
Standard Only
Released:  06/30/2015
Language
French
Current Revision
Ce document essentiel pour l’industrie fournit des descriptions et des illustrations de la terminologie de l’industrie d’assemblage électronique afin d’aider les utilisateurs et leur clients à casser les barrières linguistiques. La révision M contient plus de 220 termes nouveaux ou révisés, incluant la nouvelle terminologie pour les procédés de tropicalisation, d’enrobage et d’encapsulation, la...
no-image-available

IPC/JEDEC-J-STD-609 - Revision A - Standard Only

IPC/JEDEC J-STD-609A Errata Information

Document #:
IPC/JEDEC-J-STD-609
Revision
A
Product Type
Standard Only
Released:  06/01/2012
Language
English
This is a list of reported errata to the printed copies of IPC/JEDEC J-STD-609A. Pen and ink changes should be made in accordance with your company's document control policies.

IPC-7095 - Revision B - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
B
Product Type
Standard Only
Released:  04/02/2008
Language
English
Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. IPC-7095B delivers useful and practical information to anyone currently using BGAs or considering a conversion to area array packaging formats. This has become especially important due to the change in the alloys being used, both...
no-image-available

IPC-7095 - Revision A - Standard Only

Design and Assembly Process Implementation for BGAs

Document #:
IPC-7095
Revision
A
Product Type
Standard Only
Released:  10/01/2004
Language
English
Implementing Ball Grid Array (BGA) and Fine-Pitch Ball Grid Array (FBGA) technology presents some unique challenges for design, assembly, inspection and repair personnel. Revision A of this document delivers useful and practical information to anyone who is currently using BGAs or is considering a conversion to area array packaging formats. In addition to providing guidelines for BGA inspection...

IPC-6012 - Revision C - Standard Only

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
C
Product Type
Standard Only
Released:  04/13/2010
Language
English
Dual-language (Spanish/English) DVD -- Introduces industry specifications J-STD-001 & IPC-A-610 and explains the concept of process indicators. Includes an animated examination of the invisible problems that can be created during rework to explain why it's so important to avoid unnecessary rework. Reviews each of the tools and materials for plated-through hole (PTH) rework (including low-residue...
no-image-available

IPC-T-50 - Revision N - Standard Only

电子电路互连与封装术语及定义

Document #:
IPC-T-50
Revision
N
Product Type
Standard Only
Released:  01/13/2023
Language
Chinese
Current Revision
IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

IPC-T-50 - Revision K - Standard Only

Begriffe und Definitionen für Leiterplatten und elektronische Baugruppen

Document #:
IPC-T-50
Revision
K
Product Type
Standard Only
Released:  02/03/2015
Language
German
Current Revision
Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...

IPC-6018 - Revision C - Standard Only

Qualification and Performance Specification for High Frequency (Microwave) Printed Boards

Document #:
IPC-6018
Revision
C
Product Type
Standard Only
Released:  08/09/2016
Language
English
This specification covers qualification and performance of high frequency (microwave) boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as...

IPC-6013 - Revision C - Standard Only

Qualification and Performance Specification for Flexible Printed Boards

Document #:
IPC-6013
Revision
C
Product Type
Standard Only
Released:  12/18/2013
Language
English
Covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. Revision C incorporates new and updated requirements for final finishes, surface and hole plating...
no-image-available

IPC-6012 - Revision D - Addendum with Amendment 1 - Automotive

Automotive Applications Addendum to IPC-6012D, Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Addendum with amendment(s)
Released:  12/01/2018
Language
English
The IPC-6012DA-WAM1 Addendum, when required by procurement documentation/drawings, supplements or replaces specifically identified requirements of IPC-6012D, Revision D, for rigid printed boards that must survive the vibration and thermal cycling environments of electronic interconnects within the automotive industry. The amendment changes to this document includes updated requirements for lifted...
no-image-available

IPC-6013 - Revision D - Amendment 1

Qualification and Performance Specification for Flexible and Rigid-Flexible Printed Boards

Document #:
IPC-6013
Revision
D
Product Type
Amendment
Released:  05/03/2018
Language
English
IPC-6013D-AM1 is an amendment makes changes to the existing acceptance criteria for copper wrap plating measurements as defined by IPC-6013D. IPC-6013D-AM1 is an amendment which implements a dual criterion for Class 3 copper wrap plating, based on design effectivity (before and after July 01, 2018), so as not to impose onto legacy designs any additional qualification activity associated with...
no-image-available

IPC-6012 - Revision D - Amendment 1

Qualification and Performance Specification for Rigid Printed Boards

Document #:
IPC-6012
Revision
D
Product Type
Amendment
Released:  09/01/2017
Language
English
The IPC-6012D-AM1 makes changes to the existing acceptance criteria for copper wrap plating measurements as defined by IPC-6012D. The IPC-6012D-AM1 implements a dual criterion for Class 3 copper wrap plating, based on design effectivity (before and after January 01, 2018), so as not to impose onto legacy designs any additional qualification activity associated with adopting acceptance requirements...
no-image-available

IPC/JEDEC-J-STD-033 - Revision D - Standard Only

潮湿、再流焊和工艺敏感器件的操作、包装、运输及使用

Document #:
IPC/JEDEC-J-STD-033
Revision
D
Product Type
Standard Only
Released:  12/18/2018
Language
Chinese
Current Revision
本文件的目的是，针对潮湿、再流焊和工艺敏感器件，向生产商和用户提供标准的操作、包装、运输及使用方法。所提供的这些方法可避免由于吸收湿气和暴露在再流焊温度下造成的封装损伤，这些损伤会导致合格率和可靠性的降低。一旦正确执行IPC/JEDEC J-STD-033D，这些工艺可以提供从密封时间算起12个月的最短保质期。由IPC和JEDEC开发。
no-image-available

IPC-J-STD-020 - Revision F - Standard Only

非气密表面贴装器件（SMDs）的潮湿/再流焊敏感度分级

Document #:
IPC/JEDEC-J-STD-020
Revision
F
Product Type
Standard Only
Released:  11/27/2023
Language
Chinese
Current Revision
IPC/JEDEC J-STD-020F标准旨在确定对湿气诱发应力敏感的非气密表面贴装器件（SMD）的潮湿敏感度分级，从而能够对其进行正确地包装、储存和操作，以避免其在再流焊连接和/或维修操作时受到损坏。 IPC/JEDEC J-STD-020F标准可用于确定非密封SMD鉴定应使用的分类级别。通过该测试方法中的标准本身不足以保证长期可靠性。根据JESD22-A113，本文件为SMD生成的湿度敏感度等级（MSL）用于确定预处理的浸泡条件，以及如何根据J-STD-033正确包装、储存和处理SMD，以避免在组装回流焊连接和/或维修操作期间损坏。 对于可能对过程敏感的IC器件，请参考J-STD-075，以确定是否需要PSL（过程敏感等级）分类。
no-image-available

IPC-6012 - Revision F - Standard Only

刚性印制板的鉴定及性能规范

Document #:
IPC-6012
Revision
F
Product Type
Standard Only
Released:  04/01/2024
Language
Chinese
Current Revision
此标准涵盖了刚性印制板的鉴定和性能要求，印制板类型包括单/双面板、带或不带镀覆孔、带或不带盲孔/埋孔和金属芯的多层板。该规范涉及最终产品和表面处理涂敷要求、导体、通孔/过孔、验收测试频次和质量一致性以及电气、机械和环境要求。IPC-6012F新增和修订了一些印制板的要求，例如背钻孔结构，选择性表面处理，铜包覆电镀，印制板阶梯槽，中间目标连接盘，可焊性测试，显微切片分析，以及热冲击和基于性能测试的微导通孔结构的可靠性问题等。 IPC-6012F与IPC-6011一起使用，取代IPC-6012E。

IPC/JEDEC-J-STD-033 - Revision D - Standard Only

Manejo, embalaje, transporte y uso de componentes sensibles a la humedad/reflujo y/o al proceso

Document #:
IPC/JEDEC-J-STD-033
Revision
D
Product Type
Standard Only
Released:  02/18/2019
Language
Spanish
Current Revision
El IPC/JEDEC J-STD-033D proporciona a los fabricantes de dispositivos de montaje superficial y a los usuarios con métodos estandarizados para la manejo, embalaje, transporte y uso de componentes sensibles a la humedad/reflujo. Estos métodos ayudan a evitar daños por la absorción de humedad y por la exposición a las temperaturas de la soldadura por reflujo que pueden tener como resultado una...

IPC/JEDEC-J-STD-020 - Revision D - Standard Only

Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices

Document #:
IPC/JEDEC-J-STD-020
Revision
D
Product Type
Standard Only
Released:  03/04/2008
Language
German
Current Revision
This is the German Language version of IPC-J-STD-020D. Updated with extended support for components used for lead free assembly! This standard identifies the classification levels of nonhermetic solid state surface mount devices that are sensitive to moisture-induced stress. It is used to determine which classification level should be used for initial reliability qualification. These devices can...
no-image-available

IPC-6012 - Revision F - Standard Only

リジッドプリント基板の認定および性能仕様

Document #:
IPC-6012
Revision
F
Product Type
Standard Only
Released:  03/15/2024
Language
Japanese
Current Revision
本仕様書は、リジッドプリント基板(片面/両面基板、めっきスルーホールが有る/無い基板、ブラインドビア/ベリードビアが有る/無い多層基板)およびメタルコア基板の認定と性能について規定するものである。本仕様書では、表面処理と表面めっきコーティングに関する要求事項や、導体、ホール/ビア、受入試験頻度、品質適合性、また、電気的・機械的・環境的な要求事項についても触れている。改版F(リビジョンF)では、プリント基板のキャビティ、銅ラップめっき、中間対象ランド、はんだ付性試験、ディウェッティング、マイクロセクション評価、内層めっき部、絶縁間隙、マイクロビア構造の信頼性問題など、新規要件や追加要件が多く採用されている。本書はIPC-6011と併せて使用する。IPC-6012Eに優先する。
no-image-available

IPC/JEDEC-J-STD-020 - Revision E - Standard Only

非密閉型表面実装部品に関する吸湿/リフロー耐性の分類

Document #:
IPC/JEDEC-J-STD-020
Revision
E
Product Type
Standard Only
Released:  09/21/2021
Language
Japanese
Current Revision
IPC JEDEC J-STD-020は、表面実装部品(SMD)の吸湿耐性水準(MSL)の分類水準を特定し、適切にパッケージ化および保管され、また取り扱われることで、組立のはんだリフロー接続および/またはリペア作業中の熱的/機械的損傷を回避することを目的としている。J-STD-020は、高温による鉛フリーはんだ、および低温によるSnPbはんだの各組立で取り扱われる部品を対象としている。 このリビジョンでは適用範囲および用途における一貫性を確保するため、規格書内の多くの領域で明確な説明が追加された。本書では、ポリマー層のあるベアダイおよび非ICパッケージの使用に関する考慮事項について触れている。なお本書(リビジョンE)では、分類温度 (Tc)、パッケージの体積、乾燥重量の特性評価、時間間隔の特性を考慮した乾燥重量の決定方法についても明確にし、最新情報を記載している。また...
51-75 of 164

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-8401: Guidelines for In-Mold Electronics

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly