Menu
Close
Contact IPC

Standards

Your results

Document #

Language

Products

no-image-available

IPC-A-620 - Revision B - Standard Only

케이블과 와이어 하네스 어셈블리들에 대한 요건들과 수용

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  04/15/2015
Language
Korean
개정 B는 케이블과 와이어 하네스 어셈블리들의 요건들과 허용에 대한 업계-합의 표준으로만 남는다. IPC 및 와이어 하네스 제조자들 협회(WHMA)는 작업을 함께 계속하여, 이러한 의미 있는 최신사항들을 개발하였다. 새로운 사항들! 이것들은 몰딩(molding), 포팅(potting), 스플라이싱(splicing), 절연 보강(insulation support)이 없는 크림프 접촉부들, 인-라인 절연변위(inline insulation displacement) 커넥터들, 커넥터 형태로 변환(connectorization), 경성(rigid) 및 컨포머블 케이블(conformable cable), 연성(flexible) 슬리빙, 빗자루형 스티칭(broom stitching), 테스팅, 등에 대한 크게 확대된...
no-image-available

IPC-7711/21 - Revision B - Standard Only

전자 어셈블리의 리웍, 수정 및 수리

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  07/02/2013
Language
Korean
수리 및 수정들에 대한 무연 제품 지원과 향상된 검사 지침에 대한 주요 업데이트! 이 안내 문서는 전자 어셈블리와 PCB의 수리 및 리웍을 위한 모든 것을 포함한다! IPC-7711B /7721B의 전자 어셈블리의 리웍, 수정 및 수리는 절차적인 업데이트에 의한, 하나의 완전한 절차를 통해 무연 솔더와 전통적인 일반 솔더(SnPb)로 솔더링된 어셈블리 모두에 대해 적용 가능성을 보장하였다. 이 단일의 책은 BGAs (reballing을 포함하여) 및 flex-print 수리에 대한 이전에 발간된 변경사항과 몇 개의 새로운 절차를 포함한다. Part 1은 일반적인 요건들로서, 사용의 편의를 위해 업데이트되어 중요한 방향과 모든 절차에 대한 지침을 제공하였다. 이 섹션은 리웍, 수리 및 수정 등에 공통적인...

IPC-J-STD-006 - Revision B - Standard with Amendments 1 & 2

电子焊接领域电子级焊料合金及含助焊剂与不含助焊剂的固体焊料的要求

Document #:
IPC-J-STD-006
Revision
B
Product Type
Standard with amendment(s)
Released:  10/22/2009
Language
Chinese
简要介绍 （英文） 本文件阐述了应用于电子焊接领域的电子级焊料合金、含助焊剂与不含助焊剂的棒状、带状、粉末状焊料及专用电子级焊料的命名原则、要求及测试方法。本文件是一个质量控制文件，无意直接关联制造工艺中材料的性能。对于应用于非电子领域的焊料，应该按照ASTM B-32的规定进行采购。 本文件是三项联合工业标准之一，这三项联合工业标准阐述了电子工业所用焊接材料的要求和测试方法。其它两份标准是：IPC/EIA J-STD-004 助焊剂要求；IPC/EIA J-STD-005 焊膏要求。全文共29页，2009年10月正式发布英文版； J-STD-006B附修订本1和2（2011年8月出版中文版）修改了以下内容： 1. 增加引用文件IPC/JEDEC J-STD-609《元器件、印制电路板和印制电路板组件的有铅、无铅及其它属性的标记和标签》。 2. 阐明指定为无铅合金的意思。 3...
no-image-available

IPC-A-620 - Revision B - Standard Only

Yêu Cầu và Tiêu Chuẩn Chấp Nhận cho Các Bộ Dây và Bộ Cáp Dẫn Điện

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  06/10/2015
Language
Vietnamese
Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...

IPC/WHMA-A-620 - Revision A - Standard Only

线缆及线束组件的要求与验收

Document #:
IPC/WHMA-A-620
Revision
A
Product Type
Standard Only
Released:  09/19/2007
Language
Chinese
This is the Chinese language translation of IPC-WHMA-A-620A Includes testing requirements and lead free acceptance criteria. IPC/WHMA A-620 is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC and the Wire Harness Manufacturers Association teamed to develop this significant update, adding lead free acceptance criteria, a new chapter...
no-image-available

IPC-A-620 - Revision B - Standard Only

线缆及线束组件的要求与验收

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  08/23/2013
Language
Chinese
对于线缆和线束组件的要求和验收，B版本是唯一的、行业一致认可的标准。IPC和导线线束制造商协会（WHMA）将继续合作推进这一重要的更新。 更新！标准更新内容包括: 压模、注模、衔接、没有绝缘支撑的连接器压接、绝缘穿刺连接、连接器连接、刚和柔性线缆、柔性套管、扫帚型固定、测试……。 新标准有682幅全彩插图，125幅插图做了修订。备线、端子焊接、机制和冲压成型端子的压接、绝缘穿刺连接器、超声熔接、衔接、连接器、压模、标记、同轴/双轴线缆、缠绕/连扎、屏蔽、装配及导线绕接，包括在19个章节中。

EIA/IPC/JEDEC-J-STD-002 - Revision C - Standard with Amendment 1

Solderability Tests for Component Leads, Terminations, Lugs, Terminals and Wires

Document #:
EIA/IPC/JEDEC-J-STD-002
Revision
C
Product Type
Standard with amendment(s)
Released:  03/20/2009
Language
Chinese
This is the Chinese Language version of J-STD-002C. This standard prescribes test methods, defect definitions, acceptance criteria and illustrations for assessing the solderability of electronic component leads, terminations, solid wires, stranded wires, lugs and tabs. This standard addresses both visual acceptance and force measurement solderability criteria for both tin-lead as well as lead-free...

IPC-J-STD-004 - Revision A - Standard Only

修订本 1 助焊剂要求

Document #:
IPC-J-STD-004
Revision
A
Product Type
Standard Only
Released:  07/29/2008
Language
Chinese
This is the Chinese language version of J-STD-004A. Revision A covers requirements for qualification and classification of rosin, resin, organic and inorganic fluxes according to the activity level and halide content of the fluxes. It includes solder fluxes, flux-containing materials and low residue fluxes for no-clean processes. Associated test methods may have been updated and are available...

IPC-J-STD-004 - Revision A - Standard Only

Requirements for Soldering Fluxes

Document #:
IPC-J-STD-004
Revision
A
Product Type
Standard Only
Released:  05/05/2008
Language
Japanese
This is the Japanese language version of J-STD-004A. Revision A covers requirements for qualification and classification of rosin, resin, organic and inorganic fluxes according to the activity level and halide content of the fluxes. It includes solder fluxes, flux-containing materials and low residue fluxes for no-clean processes. Associated test methods may have been updated and are available...

IPC-A-620 - Revision A - Standard Only

Wymagania i akceptacje dla montażu kabli i wiązek przewodów

Document #:
IPC/WHMA-A-620
Revision
A
Product Type
Standard Only
Released:  04/20/2009
Language
Polish
This is the Polish language translation of IPC-WHMA-A-620A Includes testing requirements and lead free acceptance criteria. IPC WHMA A620 is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC and the Wire Harness Manufacturers Association (WHMA) teamed to develop this significant update, adding lead free acceptance criteria, a new chapter...
no-image-available

IPC/WHMA-A-620 - Revision B - Standard Only

Requisitos y Aceptabilidad de Cables y Mazos de Cables

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  10/04/2013
Language
Spanish
Amendment 1 to IPC/WHMA-A-620B This amendment provides resolution to some internal conflicts, aligns common criteria to other IPC standards, and corrects some editorial errors. This amendment is only to be used in conjunction with IPC/WHMA-A-620 Revision B, October 2012. Follow your company policy and procedures to make pen and ink changes or notations to the published IPC/WHMA-A-620 Revision B...

IPC-J-STD-003 - Revision B - Standard Only

Solderability Tests for Printed Boards

Document #:
IPC-J-STD-003
Revision
B
Product Type
Standard Only
Released:  01/19/2009
Language
Chinese
This is the Chinese language version of J-STD-003B. This standard prescribes test methods, defect definitions and illustrations for assessing the solderability of printed board surface conductors, attachment lands, and plated-through holes utilizing either tin/lead or lead-free solders. This standard is intended for use by both vendor and user. The objective of the solderability test methods...

IPC-7711/21 - Revision A - Standard Only

Rework and Repair Guide

Document #:
IPC-7711/21
Revision
A
Product Type
Standard Only
Released:  10/01/2003
Language
Polish
This is the Polish language version of IPC-7711/21A. IPC-7711A, Rework of Electronic Assemblies (with Change 1) and IPC-7721A, Repair and Modification of Printed Boards and Electronic Assemblies (with Changes 1 and 2) now includes additional support for BGAs and flex-print repair. IPC-7711A includes procedural requirements, tools, materials and methods to be used in removing and replacing...

IPC-7711/21 - Revision B - Standard Only

Wprowadzanie Poprawek, Modyfikacja i Naprawa Zespołów Elektronicznych

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  06/11/2010
Language
Polish
IPC-7711B/7721B Wprowadzanie Poprawek, Modyfikacja i Naprawa Zespołów Elektronicznych zawiera zbiór zaktualizowanych procedur w celu zapewnienia właściwego stosowania zarówno do połączeń bezołowiowych jak tradycyjnych pakietów lutowanych spoiwem SnPb. Dokument ten zawiera wszystkie opublikowane wcześniej zmiany i kilka nowych procedur dotyczących elementów BGA (wliczając reballing) oraz naprawy...

IPC-J-STD-006 - Revision B - Standard Only

Requirements for Electronic Grade Solder Alloys and Fluxed and Non-Fluxed Solid Solders for Electronic Soldering Applications

Document #:
IPC-J-STD-006
Revision
B
Product Type
Standard Only
Released:  05/05/2008
Language
Japanese
This is the Japanese language version of J-STD-006B. This standard prescribes the nomenclature, requirements and test methods for electronic grade solder alloys; for fluxed and non-fluxed bar, ribbon, and powder solders, for electronic soldering applications; and for ''special'' electronic grade solders. This is a quality control standard and is not intended to relate directly to the material's...
no-image-available

IPC/WHMA-A-620 - Revision B - Standard Only

Wymagania i akceptacje dla montażu kabli i wiązek przewodów

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  08/12/2014
Language
Polish
Rewizja B jest standardem stosowanym w przemyśle dotyczącym Wymagań i Akceptacji dla Montażu Kabli i Wiązek Przewodów. IPC i Stowarzyszenie Producentów Wiązek Przewodów (WHMA) pracowało razem w celu zaktualizowania niniejszego standard. NOWOŚĆ! Zawiera rozbudowane kryteria dla wtryskiwania, zalewania, splotów, połączeń zagniatanych, połączeń przewodów izolowanych, montażu złącza, sztywnych i...

IPC/WHMA-A-620 - Revision A - Standard Only

Requerimientos y Aceptación para Ensamble de Arneses de Cable y Alambre

Document #:
IPC/WHMA-A-620
Revision
A
Product Type
Standard Only
Released:  10/31/2007
Language
Spanish
This is the Spanish language translation of IPC-WHMA-A-620A Includes testing requirements and lead free acceptance criteria. IPC/WHMA A-620 is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC and the Wire Harness Manufacturers Association teamed to develop this significant update, adding lead free acceptance criteria, a new chapter...

IPC-7711/21 - Revision B - Standard Only

Retrabajo, Modificación y Reparación de Ensamble Electrónicos

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  06/22/2009
Language
Spanish
This is the Spanish language translation of IPC-7711B/7721B IPC-7711B/7721B Rework, Modification and Repair of Electronic Assemblies has received a complete procedure by procedure update to assure applicability to both lead free and traditional SnPb soldered assemblies. This single volume includes all previously published changes and several new procedures for BGAs (including reballing) and flex...
no-image-available

IPC-A-620 - Revision B - Standard Only

Exigences et critères d'acceptabilité pour l'interconnexion des faisceaux de fils et de câbles

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  04/16/2014
Language
French
La révision B demeure le seul standard industriel consensuel fournissant les exigences et les critères d'acceptabilité pour l'interconnexion des faisceaux de fils et de câbles. IPC et l'Association WHMA ont œuvré ensemble pour permettre l'élaboration et la mise à jour de ce standard. La nouvelle révision inclut des critères étendus concernant le moulage, la réalisation des épissures, le sertissage...
no-image-available

IPC/WHMA-A-620 - Revision A - Standard Only

Exigences et critères d’acceptation pour l’assemblage des câbles et faisceaux de câbles

Document #:
IPC/WHMA-A-620
Revision
A
Product Type
Standard Only
Released:  10/15/2010
Language
French
Cette version prend en compte les exigences et les critères d’acceptabilité liés à l’utilisation d’alliages sans plomb. La révision A du standard industriel consensuel dénomé Critères d’Acceptation pour l’Assemblage de Câbles et de Faisceaux de câbles est désormais disponible. IPC et l’association Wire Harness Manufacturers Association (WHMA), ont collaboré pour développer de manière significative...

IPC-7711/21 - Revision B - Standard Only

Reprise, Modification et Réparation des Assemblages Electroniques

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  03/04/2013
Language
French
L’IPC 771B/7721B Reprise, Modification et Réparation des assemblages électroniques a subi une mise à jour complète procédure par procédure pour en assurer l’applicabilité aux assemblages sans plomb comme aux traditionnels brasés en plombé. Ce volume unique inclue tous les modifications publiées précédemment et plusieurs nouvelles procédures pour les BGA (incluant le rebillage) et la réparation des...

IPC-7711/21 - Revision B - Standard Only

Elektronikai szerelvények újramunkálása, módosítása és javítása

Document #:
IPC-7711/21
Revision
B
Product Type
Standard Only
Released:  01/27/2008
Language
Hungarian
Az IPC-7711B/7721B Elektronikus szerelvények újramunkálása, módosítása és javítása eljárásról eljárásra frissítésen esett át, hogy biztosítsa az alkalmazhatóságot az ólommentes és SnPb technológiával forrasztott szerelvényekre egyaránt. Ez az egységes kiadás tartalmazza az összes korábban kiadott változtatást és számos új eljárást BGA-kra (beleértve az újragolyózást is), valamint flexibilis...
no-image-available

IPC/WHMA-A-620 - Revision B - Standard Only

módosításokat tartalmazó változat

Document #:
IPC/WHMA-A-620
Revision
B
Product Type
Standard Only
Released:  11/20/2013
Language
Hungarian
A kábel- és huzalköteg-szerelvények követelményeire és elfogadására továbbra is a IPC/WHMA–A–620B az egyetlen általánosan elfogadott szabvány. Az IPC és a Vezetékköteg Gyártók Egyesülete (WHMA) együttesen dolgozott azon, hogy ezen fontos új revízió létrejöhessen. ÚJ! Kibővített elfogadási kritériumokat tartalmaz a fröccsöntésre, kitöltésre, vezetékszigetelést rögzítő krimpelés nélküli krimpelt...

IPC-J-STD-001 - Revision G - Amendment 1

Ergänzung Elektronik-Hardware für Raumfahrt- und Militäranwendungen zu IPC J-STD-001G DE Anforderungen an gelötete elektrische und elektronische Baugruppen

Document #:
IPC-J-STD-001
Revision
G
Product Type
Addendum with amendment(s)
Released:  06/24/2020
Language
German
Die Ergänzung IPC J-STD-001GS AM 1-DE für Raumfahrt-Anwendungen ergänzt oder ersetzt spezifisch identifizierte Anforderungen von IPC J-STD-001G-DE für die Reinigungsanforderungen gelöteter elektrischer und elektronischer Baugruppen, die Schwingungen und die Umgebungsbedingungen thermischer Zyklen von Raumfahrt und militärischen Anwendungen überstehen müssen.
no-image-available

IPC-J-STD-001 - Revision G - Addendum with Amendment 1 - Space and Military

IPC J-STD-001G焊接的电气和电子组件要求航天和军事应用电子部件补充标准 修订本 1

Document #:
IPC-J-STD-001
Revision
G
Product Type
Addendum with amendment(s)
Released:  01/15/2021
Language
Chinese
对IPC J-STD-001GS空间附录的IPC J-STD-001GS AM 1修订补充或替代了IPC J-STD-001G的特定标识要求，以应对必须经受振动和热影响的焊接电气和电子组件的清洁要求，进入太空并在太空和军事应用中运行的周期性环境。
401-425 of 459

Coming Soon

IPC-7095E: Design and Assembly Process Implementation for Ball Grid Arrays (BGAs)

IPC-7530B: Guidelines for Temperature Profiling for Mass Soldering Processes (Reflow & Wave)

IPC-2294: Design Standard for Printed Electronics on Rigid Substrates

IPC-6904: Qualification and Performance Specifications for Printed Electronics on Rigid Substrates

IPC-9691C: User Guide for the IPC-TM-650, Method 2.6.25 Conductive Anodic Filament (CAF) Resistance and Other Internal Electrochemical Migration Testing

IPC-4105: Specification for Metal Base Copper Clad laminates for Rigid Printed Boards

J-STD-609C: Marking and Labeling of Components, PCBs and PCBAs to Identify Lead (Pb), Lead-Free (Pb-free) and Other Attributes

IPC-4556A: Specification for Electroless Nickel/Electroless Palladium/ Immersion Gold (ENEPIG) Plating for Printed Boards

IPC-8401: Guidelines for In-Mold Electronics

IPC-HERMES-9852 Version 1.6: The Global Standard for Machine-to-Machine Communication in SMT Assembly