Standards

Your results

Products

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 11/30/2021

Language

English

Current Revision

IPC-T-50N document is designed to provide definitions for terms commonly used in the electronics industry. The definitions are intended to provide sufficient clarity of detail such that a reader utilizing English as a second language could understand the subtleties of the meaning. IPC-T-50N contains over 550 new or revised terms, including new terminology for via structures, surface mount device...

Document #:

IPC/WHMA-A-620

Revision

Product Type

Standard Only

Released: 10/19/2022

Language

English

Current Revision

IPC/WHMA-A-620E is the only industry-consensus standard for Requirements and Acceptance of Cable and Wire Harness Assemblies. IPC/WHMA-A-620E describes materials, methods, tests and acceptance criteria for producing crimped, mechanically secured and soldered interconnections and the related assembly activities associated with cable and harness assemblies. IPC/WHMA-A-620E was developed by IPC and...

Document #:

IPC-6012

Revision

Product Type

Standard Only

Released: 09/28/2023

Language

English

Current Revision

IPC-6012F, covers qualification and performance of rigid printed boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as electrical, mechanical...

Document #:

IPC-7095

Revision

Product Type

Standard with amendment(s)

Released: 07/09/2019

Language

English

Current Revision

The IPC-7095D-AM1 standard describes design and assembly implementation for ball grid array (BGA) and fine-pitch BGA (FBGA) technology, focusing on inspection, repair and reliability issues associated with design and assembly of printed boards using these packages. IPC-7095D-AM1 provides the useful and practical information to those who use or are considering using BGAs. IPC-7095D-AM1 provides...

Document #:

IPC/JEDEC-J-STD-033

Revision

Product Type

Standard Only

Released: 04/04/2018

Language

English

Current Revision

IPC/JEDEC J-STD-033D provides surface mount device manufacturers and users with standardized methods for handling, packing, shipping and use of moisture/reflow sensitive components. These methods help avoid damage from moisture absorption and exposure to solder reflow temperatures that can result in yield and reliability degradation and damaged components. IPC/JEDEC J-STD-033D procedures provide a...

Document #:

IPC/JEDEC-J-STD-020

Revision

Product Type

Standard Only

Released: 02/16/2023

Language

English

Current Revision

IPC/JEDEC J-STD-020F standard is to identify the classification level of nonhermetic SMDs designed for surface mount assembly that are sensitive to moisture-induced stress so that they can be properly packaged, stored, and handled to avoid damage during assembly solder reflow attachment and/or repair operations. IPC/JEDEC J-STD-020F standard may be used to determine what classification level...

Document #:

IPC-2223

Revision

Product Type

Standard Only

Released: 01/24/2020

Language

English

Current Revision

IPC-2223E used in conjunction with IPC-2221, IPC-2223 establishes the specific requirements for the design of flexible printed boards and forms of component mounting and interconnecting structures. The flexible materials used in the structures are comprised of insulating films, reinforced and/or non-reinforced dielectric in combination with metallic materials. IPC-2223E provides new design...

Document #:

IPC-6013

Revision

Product Type

Standard Only

Released: 09/16/2021

Language

English

Current Revision

IPC-6013E standard covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. The IPC-6013E standard incorporates new and updated requirements for final...

Document #:

IPC-1791

Revision

Product Type

Standard Only

Released: 11/01/2023

Language

English

Current Revision

IPC-1791D standard provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and...

Document #:

IPC-4101

Revision

Product Type

Standard with amendment(s)

Released: 04/14/2020

Language

English

Current Revision

IPC-4101E-WAM1 covers the requirements for base materials that are referred to as laminate or prepreg and listed in the specification sheets which are found after the main body of the standard. The specification sheets are to be used primarily for rigid and multilayer printed boards for electronic interconnections. The IPC-4101E-WAM1 standard contains 70 individual specification sheets that can be...

Document #:

IPC-SM-840

Revision

Product Type

Standard Only

Released: 12/22/2010

Language

English

Current Revision

Establishes the requirements for the evaluation of liquid and dry film solder mask material and for the determination of the acceptability of use on a standard printed board system. IPC-SM-840 provides two classes of requirements, T and H, to reﬂect functional performance requirements and testing severity based on industry/end use requirements. Coverage is given to adhesion, material qualification...

Document #:

IPC-6018

Revision

Product Type

Standard Only

Released: 03/01/2022

Language

English

Current Revision

The IPC-6018D standard covers qualification and performance of high frequency (microwave) boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as...

Document #:

IPC-D-350

Revision

Product Type

Standard Only

Released: 07/01/1992

Language

English

Current Revision

This document bears two reference numbers, and may be obtained from IPC or the IEC. IPC-D-350D and IEC 1182-1 are identical in technical content. The IEC version of this document also contains a French translation. The IEC is responsible for the accuracy of that translation.Specifies record formats used to describe printed board products with detail sufficient for tooling, manufacturing and...

Document #:

IPC-4562

Revision

Product Type

Standard Only

Released: 04/01/2024

Language

English

Current Revision

IPC-4562A standard covers metal unsupported foils and foils supported by carrier films suitable for subsequent use in printed boards. IPC-4562B addresses the requirements of metal foils used in printed wiring applications.

Document #:

IPC-CC-830

Revision

Product Type

Standard Only

Released: 01/15/2019

Language

English

Current Revision

The IPC-CC-830C standard establishes qualification and conformance requirements for electrical insulating compounds (conformal coatings). It has been designed and constructed with the intent of obtaining maximum confidence in the materials with minimum test redundancy. The IPC-CC-830C standard covers: • The qualification and qualification retention of the conformal coating material (Table 3-1...

Document #:

IPC-D-325

Revision

Product Type

Standard Only

Released: 05/01/1995

Language

English

Current Revision

Establishes the general requirements for documentation necessary to fully describe end product printed boards, regardless of raw material, special fabrication requirements, layer count or end product usage. Includes master drawing requirements, board definition and artwork/phototooling. 94 pages. Revised May 1995.

Document #:

IPC-2221

Revision

Product Type

Standard Only

Released: 12/14/2023

Language

English

Current Revision

IPC-2221C is the foundation design standard for all documents in the IPC-2220 series. It establishes the generic requirements for the design of printed boards and other forms of component mounting or interconnecting structures, whether single-sided, double-sided or multilayer. Among the many updates to Revision C are new guidance and requirements on material and copper foil selection...

Document #:

IPC-7801

Revision

Product Type

Standard Only

Released: 09/14/2022

Language

English

Current Revision

The IPC-7801A standard provides requirements for process control of conveyorized solder reflow ovens. It includes a methodology for performing temperature measurements over time to establish a baseline profile, and then provides requirements to verify repeatability through periodic verification of the oven profile.

Document #:

IPC-7093

Revision

Product Type

Standard Only

Released: 11/30/2020

Language

English

Current Revision

The IPC-7093A standard provides essential design and assembly guidance for implementing bottom termination components (BTCs). Specifically, IPC-7093A provides guidelines on critical design, materials, assembly, inspection, repair, quality, and reliability issues associated with BTCs.

Document #:

IPC-7525

Revision

Product Type

Standard Only

Released: 02/28/2022

Language

English

Current Revision

The IPC-7525C standard provides guidance for the design and fabrication of stencils for solder paste and surface-mount adhesive with much of the content based on the experience of stencil designers, fabricators, and users.

Document #:

IPC-9797

Revision

Product Type

Standard Only

Released: 05/18/2023

Language

English

Current Revision

IPC-9797A is the only industry-consensus standard for Requirements and Acceptance of Press-fit Pins. IPC-9797 describes materials, methods, tests and acceptance criteria for solderless press-fit pin connections. IPC-9797 is supported by IPC-HDBK-9798 “Handbook for Press-fit Standard for Automotive Requirements and other High-Reliability Applications” for those wanting additional information and...

Document #:

IPC-7351

Revision

Product Type

Standard Only

Released: 07/01/2010

Language

English

Current Revision

This popular document covers land pattern design for all types of passive and active components, including resistors, capacitors, MELFs, SOPs, QFPs, BGAs, QFNs and SONs. The standard provides printed board designers with an intelligent land pattern naming convention, zero component rotations for CAD systems and three separate land pattern geometries for each component that allow the user to select...

Document #:

IPC-9204

Revision

Product Type

Standard Only

Released: 05/05/2017

Language

English

Current Revision

This guideline describes flexibility and stretchability testing to evaluate printable electronics for stretchable and wearable applications. 26 pages. Released March 2017

Document #:

IPC-9252

Revision

Product Type

Standard Only

Released: 09/15/2016

Language

English

Current Revision

IPC-9252 defines levels of appropriate testing and assists in the selection of the test analyzer, test parameters, test data and fixturing required to perform electrical test(s) on unpopulated printed boards and innerlayers. Revision B provides new requirements for resistive and indirect continuity and isolating testing, test record marking and traceability and an updated sample electrical test...

Document #:

IPC-QL-653

Revision

Product Type

Standard Only

Released: 11/01/1997

Language

English

Current Revision

This specification establishes the certification requirements for facilities that inspect/test printed boards, components and materials. This specification is intended to provide a minimum standardized basis for evaluating or auditing a technically oriented inspection/testing facility. Revised November 1997. 15 pages.