Standards

Your results

Products

Document #:

IPC-4203

Revision

Product Type

Standard Only

Released: 01/25/2013

Language

English

This standard establishes the classification system, the qualification and quality conformance requirements for dielectric films coated with an adhesive on one or both sides. These materials are to be used as cover material for flexible printed circuitry as well as supported or unsupported adhesive films to be used in the fabrication of flexible printed circuitry. The standard does not address...

Document #:

IPC-A-600

Revision

Product Type

Standard Only

Released: 10/16/2020

Language

Chinese

Current Revision

IPC-A-600K是印制板可接受性的权威图示说明！IPC-A-600K是一份四色文档，提供了目标的照片和插图，可以在裸露的印刷电路板上内部或外部观察到的可接受和不符合的条件。确保您的操作员，检查员和工程师具有最新的行业共识信息。IPC-A-600K提供了数十种新的或经过修订的照片和插图，涵盖了诸如开裂，背钻结构，边缘连接器连接盘，铜包裹板，镀层空隙和微小异常，微孔目标连接盘穿刺，内层分离和镀层悬垂。该文档与IPC-6012E和IPC-6013D中表达的可接受性要求保持同步。取代IPC-A-600J。

Document #:

IPC-2581

Revision

Product Type

Standard Only

Released: 09/01/2013

Language

English

This standard specifies the XML schema that represents the intelligent data file format used to describe printed board and printed board assembly products with details sufficient for tooling, manufacturing, assembly, and inspection requirements. This format may be used for transmitting information between a printed board designer and a manufacturing or assembly facility. The data is most useful...

Document #:

IPC-A-600

Revision

Product Type

Standard Only

Released: 02/20/2024

Language

Vietnamese

Current Revision

Những hướng dẫn được minh họa có tính định nghĩa cho khả năng chấp nhận đối với bảng mạch in! Tài liệu 4 màu này cung cấp các bức ảnh và các hình minh họa cho các tình trạng mục tiêu, chấp nhận và không phù hợp đối với các tình trạng quan sát được bên trong và bên ngoài bảng mạch in chưa lắp ráp. Hãy đảm bảo công nhân, người kiểm tra và các kỹ sư của bạn có được những thông tin đồng thuận mới nhất...

Document #:

IPC-1752

Revision

Product Type

Standard with amendment(s)

Language

English

IPC 1752A establishes a standard reporting format for material declaration data exchange between supply chain participants and supports reporting of bulk materials, components, printed boards, sub-assemblies, and products. This standard is not supported by a PDF form. In the A revision, the data exchange format is specified as Extensible Markup Language (XML) and IPC-1752A relies on third party...

Document #:

IPC-J-STD-004

Revision

Product Type

Standard Only

Released: 02/28/2012

Language

English

This standard prescribes general requirements for the classification and characterization of fluxes for high quality solder interconnections. This standard may be used for quality control and procurement purposes. The purpose of this standard is to classify and characterize tin/lead and lead-free soldering flux materials for use in electronic metallurgical interconnections for printed circuit...

Document #:

IPC-4101

Revision

Product Type

Standard Only

Released: 08/26/2009

Language

English

This specification covers the requirements for base materials that are referred to as laminate or prepreg. These are to be used primarily for rigid and multilayer printed boards for electrical and electronic circuits. This document contains 66 individual specification sheets that can be searched using key words. These key words allow the document's user to find materials of a similar nature, but...

Document #:

IPC-6012

Revision

Product Type

Standard Only

Released: 04/13/2010

Language

English

Dual-language (Spanish/English) DVD -- Introduces industry specifications J-STD-001 & IPC-A-610 and explains the concept of process indicators. Includes an animated examination of the invisible problems that can be created during rework to explain why it's so important to avoid unnecessary rework. Reviews each of the tools and materials for plated-through hole (PTH) rework (including low-residue...

Document #:

IPC-1791

Revision

Product Type

Standard Only

Released: 03/22/2023

Language

English

IPC-1791C provides minimum requirements, policies and procedures for printed board design, fabrication, assembly, and cable and wire harness assembly organizations and/or companies to become trusted sources for markets requiring high levels of confidence in the integrity of delivered products. These trusted sources shall ensure quality, supply chain risk management (SCRM), security and chain of...

Document #:

IPC-A-600

Revision

Product Type

Standard Only

Released: 07/27/2021

Language

Chinese (Zhōngwén)

Current Revision

IPC-A-600K是印刷電路板可接受性的權威圖示說明！IPC-A-600K是一份四色文檔，提供了目標的照片和插圖，可以在裸露的印刷電路板上內部或外部觀察到的可接受和不符合的條件。確保您的操作員，檢查員和工程師具有最新的行業共識資訊。IPC-A-600K提供了數十種新的或經過修訂的照片和插圖，涵蓋了諸如開裂，背鑽結構，邊緣連接器連接盤，銅包裹板，鍍層空隙和微小異常，微孔目標連接盤穿刺，內層分離和鍍層懸垂。該文檔與IPC-6012E和IPC-6013D中表達的可接受性要求保持同步。取代IPC-A-600J。

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 01/13/2023

Language

Chinese

Current Revision

IPC-T-50N-CN文件旨在为电子行业中常用的词汇和术语提供其定义。本文件所规定的定义充分详细地阐明了术语，以便以英语为第二语言的读者能够理解含义的细微之处。IPC-T-50N-CN包含550多个新的或修订的术语，包括通孔结构、表面贴装器件类型、焊料凸点、焊料合金、焊接、退润湿、电路板制造工艺和测试的新术语。

Document #:

IPC-1791

Revision

Product Type

Standard Only

Released: 02/20/2020

Language

English

IPC-1791A standard provides minimum requirements, policies and procedures for printed board design, fabrication and assembly organizations and/or companies to become trusted sources for markets requiring high levels of conﬁdence in the integrity of delivered products. Revision A of IPC-1791 standard includes the requirements added for CAGE Code, citizenship, security, foreign person access...

Document #:

IPC-1791

Revision

Product Type

Standard Only

Released: 09/15/2021

Language

English

IPC-1791B standard provides minimum requirements, policies and procedures for printed board design, fabrication, and assembly organizations and/or companies to become trusted sources for markets requiring high levels of conﬁdence in the integrity of delivered products. IPC-1791B expands the standard’s requirements to account for trusted sources of cable and wire harness assemblies.

Document #:

IPC-T-50

Revision

Product Type

Standard Only

Released: 02/03/2015

Language

German

Current Revision

Das unentbehrliche Nachschlagewerk für alle Verantwortlichen entlang der Wertschöpfungskette von elektronischen Produkten. Die Revision K enthält auf mehr als 120 Seiten, mehr als 220 neue und überarbeitete Begriffe und bildliche Darstellungen. Beispiele: Access Hole, Accelerated Equivalent Soak, Capture Land, Micro Via Technology, Plating Thief, Etchback, Resin Recession, Tape Automated Bonding...

Document #:

IPC-7351

Revision

Product Type

Standard Only

Released: 02/01/2007

Language

English

NEW! IPC-7351A includes both the standard and an IPC-7351A land pattern calculator on CD-ROM for accessing component and land pattern dimensional data.The calculator includes the document’s mathematical algorithms so users can build a land pattern for a corresponding surface mount part quickly and accurately.The tool also allows for modification of dimensional attributes of IPC-approved land...

Document #:

IPC-J-STD-006

Revision

Product Type

Standard Only

Released: 05/01/2001

Language

English

Document #:

IPC-4202

Revision

Product Type

Standard Only

Released: 04/13/2010

Language

English

This document provides comprehensive data to help users more easily determine both material capability and compatibility for flexible base dielectric materials for manufacture of flexible printed circuitry and flexible flat cables. It includes flexible base material specification sheets that have been updated with the newest properties for the specification material types. It establishes the most...

Document #:

IPC-2221

Revision

Product Type

Standard Only

Released: 05/01/2003

Language

English

UPDATED!IPC-2221A is the foundation design standard for all documents in the IPC-2220 series. It establishes the generic requirements for the design of printed boards and other forms of component mounting or interconnecting structures, whether single-sided, double-sided or multilayer. Among the many updates to Revision A are new criteria for surface plating, internal and external foil thicknesses...

Document #:

IPC-6018

Revision

Product Type

Standard Only

Released: 08/09/2016

Language

English

This specification covers qualification and performance of high frequency (microwave) boards, including single-sided, double-sided, with or without plated-through holes, multilayer with or without blind/buried vias and metal core boards. It addresses final finish and surface plating coating requirements, conductors, holes/vias, frequency of acceptance testing and quality conformance as well as...

Document #:

IPC-2222

Revision

Product Type

Standard Only

Released: 12/14/2010

Language

English

Used in conjunction with IPC-2221, IPC-2222 establishes the specific requirements for the design of rigid organic printed boards and other forms of component mounting and interconnecting structures. This standard applies to single-sided, double-sided or multi-layered boards. Key concepts in this document are: rigid laminate properties, design requirements for printed board assembly and design...

Document #:

IPC-4412

Revision

Product Type

Standard Only

Released: 06/17/2013

Language

English

IPC-4412B exhaustively covers the classification and requirements for finished fabrics that are formed by plain woven glass fiber yarns. Simply, these yarns are appropriately sized bundles of continuous filament, electrical-grade ("E" glass) borosilicate glass. Bulk "E" glass, for ease of description, is composed of a blend of raw metal oxides that form a borosilicate glass upon melting. Once...

Document #:

IPC-6013

Revision

Product Type

Standard Only

Released: 12/18/2013

Language

English

Covers qualification and performance requirements for flexible printed boards designed to IPC-2221 and IPC-2223. The flexible printed board may be single-sided, double-sided, multilayer or rigid-flex multilayer. All of these constructions may include stiffeners, PTHs, microvias, and blind/buried vias. Revision C incorporates new and updated requirements for final finishes, surface and hole plating...

Document #:

IPC-J-STD-004

Revision

Product Type

Standard Only

Released: 01/01/2004

Language

English

DoD Adopted 1995 Revision A covers requirements for qualification and classification of rosin, resin, organic and inorganic fluxes according to the activity level and halide content of the fluxes. It includes solder fluxes, flux-containing materials and low residue fluxes for no-clean processes. Associated test methods may have been updated and are available online for free download. Supersedes QQ...

Document #:

IPC-J-STD-003

Revision

Product Type

Standard Only

Released: 03/01/2007

Language

English

This standard prescribes test methods, defect definitions and illustrations for assessing the solderability of printed board surface conductors, attachment lands, and plated-through holes utilizing either tin/lead or lead-free solders. This standard is intended for use by both vendor and user. The objective of the solderability test methods described in this standard is to determine the ability of...

Document #:

IPC-1752

Revision

Product Type

Standard with amendment(s)

Released: 03/14/2014

Language

English

IPC-1752A establishes a standard reporting format for material declaration data exchange between supply chain participants and supports reporting of bulk materials, components, printed boards, sub-assemblies, and products. This standard is not supported directly by a PDF form. Third party software developers are invited to supply the implementation tool, and one organization has already made a...